Honeywell Home R4 Receiver Box for T6 Quick Start Guide

Compliance and Disposal Information

Pittway Sarl hereby declares that the radio equipment type T6H700RW is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://hwllhome.co/DoC.

In accordance with the WEEE Directive 2012/19/EU, at the end of the product's life, please dispose of the packaging and product at a corresponding recycling centre. Do not dispose of the unit with usual domestic refuse, and do not burn the product.

For support, contact Resideo at 200 Berkshire Place, Winnersh Triangle, Berkshire RG41 5R, Phone: 0300 130 1299.

Product Details

Product: R4 Receiver Box for T6

Supported Languages: English (EN), Dutch (NL), French (FR), German (DE), Italian (IT), Spanish (ES).

Document Type: Quick Start Guide

Access additional online guides and instructions via computer [?], tablet [?], or phone [?] at: http://hwllhome.co/eut-T6.

Installation Guide

Follow these steps for installation:

Step 1: Turn off the power

Ensure the power supply to the device is switched off. [Visual: A hand is shown turning a light switch to the 'OFF' position.]

Step 2a: Replace the old cover with new one and turn the power on

Condition: IF NOT REWIRING.

Replace the existing cover with the new one and then restore power.

[Visual: An illustration shows a device cover being carefully replaced.]

Step 2b: Remove old backplate and rewire new one

Condition: IF REWIRING.

Remove the old backplate and connect the wiring to the new backplate.

[Visual: An illustration depicts the removal of an old backplate and the connection of wires to a new backplate.]

Step 2c: Attach the new cover and turn the power on

Attach the new cover to the device and then turn the power back on.

[Visual: An illustration shows the new cover being securely attached to the device.]

Wiring Specifications

Wire gauge requirements:

• Maximum wire length: 6 mm
• Minimum wire cross-section: 0.25 mm²
• Maximum wire cross-section: 1.5 mm²

For more detailed information, visit: getconnected.honeywellhome.com.