Table of Content
Spare parts list
Lubrication instructions for product
Product information
Illustration - Type
Spare Parts List
| Item | Part Number | Description | Illustration | Price | Quantity | Price Group |
|---|---|---|---|---|---|---|
| 4 | 1 609 203 A34 | Covering hood | 1 | S$10.92 * | 1 | 26 |
| 4/10 | 1 609 203 A29 | Cover | 1 | S$2.91 * | 1 | 16 |
| 4/20 | 1 609 203 A31 | Handle | 1 | S$7.20 * | 1 | 22 |
| 6 | 1 609 203 A27 | Tapping Screw 5X20 MM | 1 | S$1.47 * | 6 | 12 |
| 7 | 1 609 203 A74 | Tapping Screw 5X55 MM | 1 | S$1.47 * | 2 | 12 |
| 8 | 1 609 203 A33 | On-Off Switch | 1 | S$20.16 * | 1 | 23 |
| 10 | 1 609 203 A26 | Cable Clip | 1 | S$1.09 * | 1 | 11 |
| 11 | 1 601 118 E04 | Nameplate | 1 | - | 1 | - |
| 16 | 1 609 203 A24 | Power supply cord | 1 | S$12.25 * | 1 | 27 |
| 16/10 | 1 609 203 A25 | Grommet | 1 | S$1.74 * | 1 | 13 |
| 16/20 | 1 609 203 A28 | Socket-Terminal Strip | 1 | S$2.03 * | 1 | 14 |
| 16/30 | 1 609 203 B34 | Reference Plate | 1 | S$2.54 * | 1 | 15 |
| 17 | 1 609 203 A36 | Air-Deflector Ring | 1 | S$2.54 * | 1 | 15 |
| 20 | 1 609 203 A35 | Seal Ring | 1 | S$4.41 * | 1 | 16 |
| 23 | 1 609 203 A41 | Seal Ring | 1 | S$2.91 * | 1 | 16 |
| 24 | 1 609 203 A42 | Air-Deflector Ring | 1 | S$3.98 * | 1 | 18 |
| 25 | 1 609 203 N44 | Seal Ring | 1 | S$6.05 * | 1 | 21 |
| 26 | 1 609 203 A43 | Intermediate Flange | 1 | S$20.79 * | 1 | 28 |
| 28 | 1 609 203 A32 | Filter Disc | 1 | S$2.21 * | 1 | 13 |
| 28/1 | 1 609 203 A37 | Air Filter | 1 | S$9.24 * | 1 | 21 |
| 31 | 1 609 203 A30 | Tapping Screw 5X30 MM | 1 | S$1.47 * | 8 | 12 |
| 32 | 1 601 118 E06 | Manufacturer's nameplate | 1 | S$2.54 * | 1 | 15 |
| 35 | 1 609 203 A38 | Tapping Screw 5X40 MM | 1 | S$1.47 * | 6 | 12 |
| 37 | 1 609 203 A39 | Intermediate housing | 1 | S$8.92 * | 1 | 24 |
| 38 | 1 609 203 A52 | Float | 1 | S$1.26 * | 1 | 14 |
| 38/10 | 1 609 203 B33 | Seal | 1 | - | 1 | - |
| 39 | 1 609 203 A51 | Suction Basket | 1 | S$7.00 * | 1 | 22 |
| 43/50 | 1 609 203 A53 | Retaining snap ring | 1 | S$5.99 * | 1 | 18 |
| 47 | 1 609 203 A44 | Support clamp | 1 | S$2.54 * | 1 | 15 |
| 48 | 1 609 203 N57 | Cable Set | 1 | S$18.19 * | 1 | 30 |
| 50 | 1 609 203 A49 | Sleeve | 1 | S$1.09 * | 4 | 11 |
| 51 | 1 609 203 A50 | Tapping Screw 5X20 MM | 1 | S$1.47 * | 4 | 12 |
| 743/60 | 2 607 432 013 | Dust Bag | 1 | - | 1 | - |
| 822 | 1 609 203 N53 | Suction Blower 230V | 1 | S$98.79 * | 1 | 46 |
| 853 | 1 609 203 A46 | Cable tie | 1 | S$1.09 * | 1 | 11 |
| 43/60 | 1 609 203 A54 | Filter | 3 | S$13.65 * | 1 | 24 |
| 43/70 | 1 609 203 A55 | Support Frame | 3 | S$6.51 * | 1 | 18 |
| 690 | 1 609 203 D29 | Dust container | 3 | S$119.07 * | 1 | 43 |
| 690/100 | 1 609 203 A64 | Cover Plate | 3 | S$3.98 * | 1 | 18 |
| 690/10 | 1 609 203 D28 | Container | 3 | S$70.98 * | 1 | 37 |
| 690/110 | 1 609 203 A65 | Corner Protection | 3 | S$7.00 * | 1 | 22 |
| 690/120 | 1 609 203 A66 | Impeller | 3 | S$10.92 * | 4 | 23 |
| 690/50 | 1 609 203 A59 | Deflector | 3 | S$3.61 * | 1 | 17 |
| 690/60 | 1 609 203 A60 | Plate | 3 | S$2.03 * | 1 | 14 |
| 690/70 | 1 609 203 A61 | Spring | 3 | S$1.68 * | 1 | 11 |
| 690/80 | 1 609 203 A62 | Sealing Plate | 3 | S$2.54 * | 1 | 15 |
| 690/90 | 1 609 203 A63 | Push-Button | 3 | S$1.68 * | 1 | 11 |
| 650/20 | 1 609 203 A77 | Fitting Ø 35 MM | 4 | S$7.14 * | 1 | 18 |
| 650/30 | 1 609 203 A78 | Fitting Ø 45 MM | 4 | S$3.98 * | 1 | 18 |
| 652 | 1 609 203 B92 | Suction Pipe | 4 | S$11.97 * | 2 | 26 |
| 750 | 2 600 793 009 | Air Hose Ø 19 MM, 3/4", L= 3 M | 4 | - | 1 | - |
| 750 | 2 607 002 149 | Air Hose Ø35 MM L= 3 M | 4 | - | 1 | - |
| 750/1 | 1 610 793 002 | Air Hose Ø19 MM, L=5M, 3/4" BLACK | 4 | - | 1 | - |
| 750/1 | 2 607 002 150 | Air Hose Ø35 MM L= 5 M | 4 | - | 1 | - |
| 751 | 1 609 390 479 | Setting Tube Ø 35 MM | 4 | - | 1 | - |
| 752 | 2 607 000 162 | Suction Pipe Ø 35 MM, 0,5 M | 4 | - | 1 | - |
| 753 | 2 607 000 170 | Suction Nozzle | 4 | - | 1 | - |
| 754 | 1 609 390 478 | Suction Nozzle Ø 35 MM | 4 | - | 1 | - |
| 754/10 | 1 609 390 493 | Flat Brush | 4 | S$27.30 * | 1 | 30 |
| 754/20 | 1 609 390 494 | Flat Brush | 4 | S$9.87 * | 1 | 24 |
| 754/30 | 1 609 390 495 | Strip brush | 4 | S$12.25 * | 1 | 27 |
| 755 | 2 607 000 165 | Crevice Nozzle Ø 35 MM, L= 250 MM | 4 | - | 1 | - |
| 756 | 1 609 201 229 | Suction Nozzle Ø 35 MM | 4 | - | 1 | - |
| 757 | 1 609 201 230 | Suction Nozzle Ø 35 MM | 4 | - | 1 | - |
| 759 | 2 607 000 166 | Suction Nozzle | 4 | - | 1 | - |
| 759/20 | 1 609 202 534 | Brush Insert | 4 | S$2.03 * | 1 | 14 |
| 761 | 1 609 390 481 | Suction Brush Ø 35 MM | 4 | - | 1 | - |
| 762 | 2 607 000 168 | Suction Nozzle Ø 35 MM | 4 | - | 1 | - |
| 764 | 1 609 499 005 | Fitting | 4 | - | 1 | - |
| 765 | 2 607 000 748 | Adapter Ø 35/Ø19 MM (3/4") | 4 | - | 1 | - |
| 773 | 2 605 411 150 | Dust Bag 5 PIECE | 4 | - | 1 | - |
| 852 | 1 609 203 D20 | O-Ring | 4 | S$1.47 * | 2 | 12 |
* Prices shown are nett prices, exclusive of GST.
Lubrication Instructions for Product
Product: All Purpose Vacuum Cleane - GAS 11-21 - 0 601 97A 004
| Pos. | Description | Instruction | Lubricant | Quantity |
|---|---|---|---|---|
| - | Motor (or spare part component) is only supplied complete | - | - | - |
Product Information
| Field | Value |
|---|---|
| Product No | 0 601 97A 004 |
| Description | All Purpose Vacuum Cleane |
| DIN-Text | |
| ID_Text_Ext | |
| Trading Description | GAS 11-21 |
| Voltage_1 | 230 V |
| ID_Country_Product | 039 - ID |
Illustrations
The document includes several diagrams illustrating the parts of the All Purpose Vacuum Cleaner GAS 11-21. These diagrams are labeled as Figure/Abb. 1 through 4.
Figure/Abb. 1 & 2: Exploded View of Main Unit
These diagrams show an exploded view of the main body of the vacuum cleaner and its associated components. Key parts identified by numbers include: Covering hood (4, 4/10, 4/20), Handle (6), On-Off Switch (8), Cable Clip (10), Nameplate (11), Power supply cord (16), Grommet (16/10), Socket-Terminal Strip (16/20), Reference Plate (16/30), Air-Deflector Ring (17, 24), Seal Ring (20, 23, 25), Intermediate Flange (26), Filter Disc (28), Air Filter (28/1), Tapping Screws (31, 35, 51), Manufacturer's nameplate (32), Intermediate housing (37), Float (38), Seal (38/10), Suction Basket (39), Retaining snap ring (43/50), Support clamp (47), Cable Set (48), Sleeve (50), Dust Bag (743/60), Suction Blower (822), and Cable tie (853). Some parts are indicated as 'NEU! / NEW!' or 'ALT! / OLD!'.
Figure/Abb. 3: Dust Container Assembly
This diagram illustrates the dust container and its related components. It shows the main dust container (690/10, 690/20), dust container lid (690), filter (43/70, 43/60), and various fittings and seals such as 690/40, 690/50, 690/60, 690/70, 690/80, 690/90, 690/100, 690/110, and 690/120. The dust bag (743/60) is also shown in relation to this assembly.
Figure/Abb. 4: Hoses, Nozzles, and Accessories
This diagram displays various accessories and extension parts for the vacuum cleaner. It includes different types of hoses (750, 750/1), suction pipes (652, 752), nozzles (753, 754, 756, 757, 761, 762), brushes (754/10, 754/20, 754/30, 761), adapters (765), and fittings (650/20, 650/30, 764). The dust bag (773) is also depicted.
The text "Änderungen vorbehalten | Modifications reserved | Modifications reservees | Salvo modificaciones" appears on the illustration pages, indicating that modifications are reserved.
Bosch around the world - Country Overview
