Manuals+

User Manual for audientes models including: EVO 8 Desktop 4x4 USB Type C Audio Interface, EVO 8, Desktop 4x4 USB Type C Audio Interface, 4x4 USB Type C Audio Interface, USB Type C Audio Interface, Type C Audio Interface, C Audio Interface, Audio Interface

AUDIENT EVO 8 (02) PDF MANUAL - MANUAL-HUB.COM


File Info : application/pdf, 2 Pages, 767.55KB

AUDIENT EVO 8 (02) 
Welcome to your new EVO 8 Audio Interface. Please read this quick guide to help get you started.

01

Connect
To connect your EVO 8 to your computer, simply plug in the USB cable provided. Once successfully connected, EVO 8's volume wheel LED's will illuminate and perform a short animation followed by the Volume button illuminating.

03

The Features
Channels 1, 2, 3 & 4 Phantom Power (for condenser microphones) Smartgain Mode Volume knob Output 1 Volume Button Output 2 Volume Button

02

Install Drivers
In order to start using your EVO 8 you will need to download and install the latest drivers, which can be found at evo.audio/evo8/downloads. Once the drivers are installed, you may be prompted to update the unit's firmware. A full installation guide and user manual can also be found on our website.

Additional Notes
Phantom Power - in order to use 4 channels of phantom power simultaneously, a USB C-C connection must be used. If you are using a USB A connection you will only be able to use 2 channels of phantom power simultaneously.

4 2 1

3

https://manual-hub.com/

56

04 Smartgain Mode

1 Press the Smartgain button to begin

The Smartgain LED will illuminate green

2

and the input channel LED's (1, 2, 3 & 4) will begin to flash (indicating a channel

must be selected)

Press one or more of the input channel
3 buttons to select the channels to be adjusted

The Smartgain LED will start flashing red

5

and the volume wheel LED's will illuminate indicating that Smartgain Mode is now

listening

6

Start playing or performing into the microphone

Smartgain Mode will dial in the correct

7

levels and when complete the Smartgain button will flash green twice to indicate

it has been successful

4

Press the Smartgain button again to begin the process

https://manual-hub.com/

8 You are now ready to start recording

References