Installation Guide for MEAN WELL models including: EDR-75-12, EDR-75-24, EDR-75-48, EDR-75-12 Single Output Industrial, EDR-75-12, Single Output Industrial, Output Industrial, Industrial
MEAN WELL EDR-75-12 | Sursa alimentare, comutatie, 12V / 6.3A
75W Single Output Industrial DIN RAIL EDR-75 series User's Manual R33100 RoHS TPTC004 Bauart gepruft Sicherheit egelma ge od o s be wac g www.tuv.com ID 2000000000 BS EN/EN62368-1 IEC62368-1 Features Universal AC input / Full range Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508 (industrial control equipment) approved BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level 100% full load burn-in test 2 years warranty Applications Industrial control system Semiconductor fabrication equipment Factory automation Electro-mechanical apparatus GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx Description EDR-75 is one economical slim 75W Din rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 32mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to BS EN/EN61000-3-2, the norm the European Union regulates for harmonic current. EDR-75 is designed with metal housing that enhances the unit's power dissipation. With working efficiency up to 88.5%, the entire series can operate at the ambient temperature between -20 and 60 under air convection. It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL508, TUV BS EN/EN62368-1, and etc.) make EDR-75 a very competitive power supply solution for industrial applications. Model Encoding EDR - 75 - 12 Output voltage Output wattage Series name File Name:EDR-75-SPEC 2024-05-06 75W Single Output Industrial DIN RAIL EDR-75 series SPECIFICATION MODEL EDR-75-12 EDR-75-24 EDR-75-48 DC VOLTAGE 12V 24V 48V RATED CURRENT 6.3A 3.2A 1.6A OUTPUT CURRENT RANGE 0 ~ 6.3A RATED POWER 75.6W RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE ADJ. RANGE 12 ~ 14V 0 ~ 3.2A 76.8W 120mVp-p 24 ~ 28V 0 ~ 1.6A 76.8W 150mVp-p 48 ~ 55V VOLTAGE TOLERANCE Note.3 ±2.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.0% ±1.0% ±1.0% SETUP, RISE TIME 1200ms, 60ms/230VAC 2000ms, 60ms/115VAC at full load HOLD UP TIME (Typ.) 60ms/230VAC 12ms/115VAC at full load VOLTAGE RANGE Note.6 90 ~ 264VAC 127 ~ 370VDC [DC input operation possible by connecting AC/L(+), AC/N(-)] FREQUENCY RANGE 47 ~ 63Hz INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 85.5% 1.45A/115VAC 20A/115VAC 0.9A/230VAC 35A/230VAC 87.5% 88.5% LEAKAGE CURRENT <1mA / 240VAC OVERLOAD 105 ~ 130% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE 14 ~ 17V 29 ~ 33V Protection type : Shut down o/p voltage, re-power on to recover 56 ~ 65V OVER TEMPERATURE Shut down o/p voltage, re-power on to recover WORKING TEMP. WORKING HUMIDITY -20 ~ +60 (Refer to "Derating Curve") 20 ~ 95% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/ (0 ~ 50) VIBRATION Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 SAFETY STANDARDS SAFETY & EMC (Note 4) WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION Ul508, TUV BS EN/EN62368-1, EAC TP TC 004, BSMI CNS15598-1 approved;(meet BS EN/EN60204-1) I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class A, BS EN/EN61000-3-2,-3, EAC TP TC 020, CNS15936 Class A EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, EAC TP TC 020 MTBF OTHERS DIMENSION 2777.2K hrs min. Telcordia SR-332 (Bellcore) ; 506.6K hrs min. MIL-HDBK-217F (25) 32*125.2*102mm (W*H*D) PACKING 0.51Kg; 28pcs/15.3Kg/1.22CUFT NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1F & 47F parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf ) 5. Installation clearances : 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power. In case the adjacent device is a heat source, 15mm clearance is recommended. 6. Derating may be needed under low input voltage. Please check the derating curve for more details. 7. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:EDR-75-SPEC 2024-05-06 75W Single Output Industrial DIN RAIL EDR-75 series Block Diagram EMI FILTER I/P & RECTIFIERS FG O.L.P. O.T.P. POWER SWITCHING PWM CONTROL RECTIFIERS & FILTER O.C.P. DETECTION CIRCUIT O.V.P. fosc : 85KHz +V -V Derating Curve Static Characteristics 230VAC 100 80 115VAC 60 50 40 20 24V,48V(230VAC) 12V(230VAC) 12V,24V,48V(115VAC) -20 -10 0 10 20 30 40 45 50 60 70 (VERTICAL) AMBIENT TEMPERATURE () 100 90 80 70 60 50 40 90 100 125 135 145 155 165 175 180 200 230 264 INPUT VOLTAGE (V) 60Hz LOAD (%) LOAD (%) File Name:EDR-75-SPEC 2024-05-06 75W Single Output Industrial DIN RAIL Mechanical Specification EDR-75 series Case No. Unit:mm 35 125.2 102 (12V,24V only) (48V only) Side View Installation Instruction Top View 32 1234 TB2 DC OK +V ADJ. TB1 123 Front View Bottom View Side View Terminal Pin No. Assignment (TB1) Pin No. Assignment 1 FG 2 AC/N or DC 3 AC/L or DC + Terminal Pin No. Assignment (TB2) Pin No. Assignment 1,2 DC OUTPUT -V 3,4 DC OUTPUT+V 35 This series fits DIN rail TS35/7.5 or TS35/15. For installation details, please refer to the Instruction manual. ADMISSIBLE DIN rail:TS35/7.5 OR TS35/15 (For reference only. Not included with unit.) Back View Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:EDR-75-SPEC 2024-05-06Acrobat Distiller 9.0.0 (Windows)