SMART VISUAL DOORBELL

OPERATION AND DESCRIPTION

The Smart Visual Doorbell M01 features the following components:

• Optical sensor
• Wide-angle lens
• Microphone
• Hidden infrared ray
• Button
• Hidden LED
• Charging port
• Reset the keyhole
• Loudspeaker
• USB plug
• Volume control
• Music selection (38 songs for choice)
• Pair LED
• Pair button

The device has a loudspeaker and a USB plug for charging.

APP INSTALLATION AND USE

1. APP download and installation

Method 1: Use WeChat/browser to scan the QR code, download, and install the application.

Method 2: Search for "Linklemo" in the Apple Store/Google Play/Mobile App Store and install it.

The app icon is "Linklemo".

2. APP connection

1. Open the APP and register to log in.
2. Press the doorbell for 10 seconds for a voice prompt: "The device has been reset, Please turn on the Bluetooth to connect to the network!" (Enter distribution network mode).
3. Click "Add Device" (+) and automatically scan devices until the device is scanned, then click "Add" to bind immediately.
4. Select 2.4GHz WiFi, choose your WiFi network, and enter the WiFi password. (Note: 5G WiFi is not supported).
5. After successful binding, there will be a voice prompt: "The device bound successfully!".

If the equipment cannot be added for a long time, the device voice prompts: "The network connection failed. Please reset the device!" (Long press the doorbell key for 10 seconds to re-enter the distribution network mode).

3. Function introduction

• Video call: When a visitor presses the doorbell, the APP will receive a message from the device, allowing you to talk to the visitor via video.
• Doorbell sharing: The added device can be shared with others on the APP. The person to be shared needs to download the "Linklemo" APP and register to log in.
• Low battery and charging: When the battery is low, the bound client-side will receive a low battery reminder. Please replace the battery in time to avoid affecting its use.
• Charging indicator: The red indicator light is on during charging, and the green indicator light is solid when charging is complete.
• Ambient light: The blue ambient light lights up when the doorbell is pressed and goes out after letting go.
• Dingdong machine prompt ringtone: 38 chord tones to choose from.

INSTALLATION AND FIXATION OF DOORBELL

Method 1: Stick the double-sided adhesive tape on the back of the machine, choose an appropriate height on the wall, and stick it tightly to fix it.

Method 2: Select a suitable position, drill a hole, insert the anchor (if the wall is not solid, otherwise screw in directly), screw to fix the back cover, and then slide the product down against the back cover to fix it.

MATCHING OF DINGDONG MACHINE AND DOORBELL

1. Plug the Ding dong machine into the 5V USB interface and get power.
2. Press the Match button on the Ding Dong machine for 2 seconds to enter matching mode; the red indicator will be light on.
3. Press the ring button of the doorbell again and wait until the matching succeeds; the red light on the Ding dong machine will be off.

ATTENTIONS

1. Turn on Bluetooth to ensure that the WiFi network environment is good; the device does not support 5G WiFi.
2. All permissions must be set through the APP to use the product normally.
3. During the linking matching process, the doorbell should be as close as possible to the Dingdong machine.
4. If the doorbell button is not pressed within 10 seconds after the Dingdong machine enters the pairing mode, it will exit the pairing mode and the indicator will be off.
5. Make sure that the doorbell has sufficient power and the Dingdong machine is connected to the power.
6. Try not to stick it on a metal door for installation.
7. After installation, please remove the lens protective film before use.

After the Ding dong machine is successfully connected to the doorbell, when a visitor presses the doorbell, the Ding dong machine will ring and immediately send a response to the APP on your phone.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.