Soundvision CLI-4260 2-Way Column Speaker

Introduction

Thank you for choosing Soundvision speaker products. All products are tested strictly before leaving the factory, with guaranteed quality. Our speakers are widely used in places such as schools, gymnasiums, square halls, parks, parking lots, railway stations, airports, villa communities, and mall supermarkets, making them an ideal choice for public address systems. Please read this manual in detail before installation, commissioning, and use for better product experience.

Description and Features

The CLI-4260 is a 3-inch 2-Way Column loudspeaker with a 70V/100V line transformer, suitable for installation applications and is weather-resistant.

This 3-inch 2-Way full-range column loudspeaker delivers clear sound for background music, ideal for indoor and outdoor use with an IP65 weatherproof rating. It features a power handling of 60 Watts and line transformers with multiple taps for 70V/100V systems. It is designed for applications in station gardens, swimming pools, stadiums, tennis courts, churches, and more.

• Suitable for indoor and outdoor applications.
• All-weather versatility IP65*
• High sensitivity.
• Transformer Taps: 70V, 100V
• 3-inch LF transducer: 15 Watts RMS
• 2-inch HF transducer: 5 Watts RMS
• Power Handling: 60 Watts
• Frequency Response: 160Hz ~ 16kHz (-3dB)
• Coverage: H 120° (Horizontal) x 80° (Vertical)
• Available in black or white.
• Easy and secure wall mount installation in outdoor areas using supplied strong metal mounting brackets.

Specifications

Safety Tips and Warnings

Please be sure to read the detailed notes below. Pay close attention to this manual and important warnings. It is recommended to keep this manual for future reference.

The manual shows warning signs and security measures to prevent improper operation, personal injury, or loss of property. Please read and understand these symbols and warnings to be fully aware of potential risks.

When installed loudspeakers:

• Do not expose speakers to rain, wet conditions, or water, as this may lead to fire or other hazards.
• Be aware of the speaker's voltage provisions. Using high voltage may cause electric shock or fire. Ensure wires are not pruned, distorted, or replaced with damaged wires.
• Avoid unstable installation or setup. Do not place speakers on shaking tables or unstable surfaces to prevent them from falling and causing personal injury or property damage. Speakers should be installed on a solid shelf or support.
• Do not handle plugs or speakers with wet hands, as this may lead to electric shocks.
• When unplugging, pull the plug itself, not the wire.
• Using a damaged power line may cause fire or electric shock.
• If moving a speaker, ensure it is unplugged first. Moving the speaker while plugged in may cause fire or electric shock. Grip the plug when connecting or disconnecting.
• Do not place speakers on vent covers, as this may cause internal heating and fire.
• Avoid installing speakers in humid or dusty environments, or in direct sunlight, as this may cause fire or electric shock due to heat, smoke, or steam.

Installation Guide

The CLI-4260 features easy and secure wall mount installation for outdoor areas using supplied strong metal mounting brackets.

Mounting Bracket Components:

The mounting bracket system consists of three main parts: Bracket 1, Bracket 2, and Bracket 3, along with a screw rod.

Step 1: Prepare the Bracket

Split the mounting bracket into three parts (Bracket 1, 2, 3). Fit two six-point screws into the mounting slot on the back of the speaker, parallel to the column, to help attach the bracket.

Step 2: Wall Mounting

According to the installation plan, drill holes on the wall at the desired position. Fix Bracket 3 onto the wall surface. Then, assemble Bracket 1 and Bracket 2 with Bracket 3 as shown in the diagrams. Ensure the entire bracket assembly is securely mounted. (Three parts of the fastening bracket are supplied with screws.)

Diagram Description: Wall Mounting

• A diagram shows Bracket 3 being attached to a wall. Dimensions of 39.5mm and 49.5mm are indicated, likely for positioning or clearance.
• Another diagram illustrates the assembly of Bracket 1 and Bracket 2 onto Bracket 3, which is fixed to the wall. A screw and nut are shown for adjustment.
• Text indicates "Adjustable height of installation".

Diagram Description: Speaker Attachment

• A diagram shows the speaker column with the speaker mounting slot on the back. Hexagon screws are used to attach the bracket components.
• A warning is provided: "When placing speakers horizontally, be careful not to touch and load the front of the speaker net with hard facing, otherwise it will deform the front net."

Diagram Description: Bracket Adjustments

• Diagrams illustrate the adjustable nature of the mounted speaker.
• Text indicates "Adjustable left and right for 80°".
• Text indicates "Adjustable up and down for 20°".
• Text indicates "Lock the screws after adjusting the angle."

Diagram Description: Waterproof Joint and Power Adjustment

• A diagram on the rear of the speaker shows a "Waterproof joint".
• A "Power adjustable knob" is shown with markings for different power taps and impedance settings. The knob allows selection from 70V taps (2W, 5W, 10W, 20W, 30W) and 100V taps (5W, 10W, 20W, 40W, 60W), with a 4Ω bypass option.
• A prominent warning is displayed: "DO NOT USE IN POSITION 4Ω ON A 70V/100V SYSTEM, OR DAMAGE WILL OCCUR."

Wiring and Power Adjustment

Connect audio wirings and adjust the power knob according to requirements.

• White wire: Signal (+)
• Black wire: COM (-)

Refer to the power adjustment knob diagram for selecting the appropriate tap for 70V, 100V systems, or the 4Ω direct connection.

Important Note: Ensure the correct tap is selected. Using the 4Ω setting on a 70V or 100V system will cause damage.