User Guide for JBL models including: CSLM30B Battery-Powered Lavalier Microphone, CSLM30B, Battery-Powered Lavalier Microphone
output level. Also, a clip-on microphone allows the user to move about freely and keep their hands free. ii. Hold the lavalier microphone firmly & attach the tie-clip to the microphone at a point just below the microphone body, as shown. Attach the windshield on the microphone.
headphone jack of the smartphone/laptop. Slide the switch on the battery module to smartphone/laptop mode. The lavalier microphone.
CSLM30B BATTERY-POWERED LAVALIER MICROPHONE USER GUIDE CSLM30B BATTERY-POWERED LAVALIER MICROPHONE BOX INCLUDES i. CSLM30B battery-powered lavalier microphone ii. Detachable earphone for monitoring iii. Tie-clip x 2 iv. Windshield x 2 v. LR44 battery vi. ¼" adapter vii. Carry pouch CONNECTING THE MICROPHONE TO SMARTPHONES/LAPTOPS i. Plug the 3.5mm TRRS connector into the headphone jack of the smartphone/laptop. Slide the switch on the battery module to smartphone/laptop mode. The lavalier microphone will be used as the default microphone while shooting videos & recording audio. Audio out will be played via the headphone jack on the battery module. The supplied earphone can be used to monitor the output. Headphone out CONNECTING THE MICROPHONE TO DSLR CAMERAS/CAMCORDERS/AUDIO RECORDERS i. Plug the 3.5mm TRRS connector into the microphone input on the camera/recorder. Insert the LR44 battery into the battery module, with polarity as indicated. Slide the switch on the battery module to camera mode. CONNECTING THE MICROPHONE TO MIXER AMPLIFIERS i. Use the given ¼" adapter to plug the microphone into the microphone input of the mixer-amplifier. Insert the LR44 battery in the battery module, with polarity as indicated. Slide the switch on the battery module to camera mode. GAIN REDUCTION i. This slide switch on the battery module lets you reduce the output of the microphone by sliding to "-10dB" position. This setting is particularly useful while recording in noisy conditions and helps reduce ambient noise capture. USING THE MICROPHONE i. The benefit of a microphone attached to the user's clothes is that the microphone will maintain a constant working distance independent of the user's movements and thus ensure a constant output level. Also, a clip-on microphone allows the user to move about freely and keep their hands free. ii. Hold the lavalier microphone firmly & attach the tie-clip to the microphone at a point just below the microphone body, as shown. Attach the windshield on the microphone. iii. Attach the microphone to the user's upper body, placing it as close as possible to his/her mouth. FEATURES i. Omnidirectional lavalier microphone with 3.5mm TRRS jack ii. Perfect for recording, podcast, interviews, vlogging, etc. iii. Headphone output for monitoring with smartphones/laptops iv. -10dB gain reduction iv. Compatible with smartphones & most DSLR cameras vi. Can be used with mixer-amplifiers MICROPHONE SPECIFICATION Polar pattern Audio frequency bandwidth Sensitivity Max. sound pressure level Output impedance Battery type Speaker impedance Cable length Weight Omnidirectional 60Hz to 18KHz -30dB ±3dB (0dB=1V/Pa at 1KHz) 110 dB 2.2 K ohms LR44 16 ±20% Ohms 4 meters 47.3 g All product images shown are for illustration purpose only and may not be an exact representation of the product. Actual product may vary in colour, size and finishing. © 2021 HARMAN International Industries, Inc. All rights reserved.Adobe PDF library 15.00 Adobe Illustrator 25.3 (Windows)