DigiTech Whammy Ricochet Owner's Manual

Introduction

The Whammy Ricochet pedal offers the popular Whammy pitch-shifting effect in a compact form factor. Instead of using a treadle to control pitch-bending speed, the Whammy Ricochet bends the pitch of the incoming signal in time with the SHIFT and RETURN controls. Its true bypass design ensures your tone remains unaffected when the effect is bypassed.

The Whammy effect can be engaged or disengaged using the Footswitch, which can operate as either a momentary or latching switch. The TRAJECTORY LED ladder visually indicates the speed and direction of the pitch-shift. The pitch of the incoming signal can be shifted up or down by the following intervals:

• 2nd
• 4th
• 5th
• 7th
• Octave
• 2 Octaves
• Octave + Dry

To use the Whammy Ricochet pedal, select the desired pitch-shift interval with the PITCH control, then select the pitch direction with the RANGE switch. Set the footswitch for momentary or latching operation with the MOMENTARY switch. To hear the speed of the pitch-shift effect's rise and fall, engage/disengage the effect with the footswitch; adjust the SHIFT and RETURN controls so the pitch effect bends to the selected interval and at the desired tempo.

Features

• Pitch shifting up to 2 octaves up or down
• Ballistics controls with Trajectory LED meter
• Switchable Classic and Chords modes
• Selectable momentary or latching footswitch operation
• True Bypass
• Compact design
• Durable construction

User Interface

The Whammy Ricochet pedal is controlled via several knobs and switches:

Diagram Description: The pedal features a top-down view with labeled controls. Key elements include:

• 1. Power Connector: Connects to the included power adapter. Requires a 9VDC external adapter (not included). Ensure the adapter provides at least 300mA.
• 2. Ballistics Knobs (SHIFT & RETURN): These concentric knobs control the speed at which the pitch shifts (SHIFT) and the speed at which it returns to normal pitch (RETURN).
• 3. Pitch Knob: Sets the pitch interval for the pitch shift. The direction (up or down) is determined by the RANGE switch.
• 4. Input Jack: Connect your instrument here (1/4” unbalanced TS).
• 5. Effect Footswitch: Engages or disengages the effect. Can be set to momentary or latching mode via the MOMENTARY switch.
• 6. Output Jack: Connect to your amplifier or the next pedal in your chain (1/4” unbalanced TS).
• 7. Range Switch: Selects whether the incoming signal is pitched up or down.
• 8. Trajectory LED Ladder: These LEDs visually indicate the direction and speed of the pitch shift. They light up sequentially. If the effect is bypassed, the LEDs cycle in the direction selected by the RANGE switch every 2 seconds.
• 9. Momentary Switch: Configures the footswitch operation. When set to 'ON', the Whammy effect is only active while the footswitch is held down. When set to 'OFF', the effect toggles between engaged and bypassed each time the footswitch is pressed.

Note: When the MOMENTARY switch is 'ON', the Whammy Ricochet uses a buffered bypass. When the MOMENTARY switch is 'OFF', it provides true bypass.

Classic & Chords Modes

The Whammy Ricochet offers two operating modes: Classic mode (emulating the original Whammy algorithm) and Chords mode (emulating the Whammy DT's modern algorithm). Classic mode is ideal for single-note solos, while Chords mode is for bending entire chords. The default mode is Chords. The mode can be changed while engaging or disengaging the effect.

To switch between Classic and Chords modes:

1. Set the MOMENTARY switch to OFF.
2. Press and hold the footswitch for at least 3 seconds. The default mode is Chords, indicated by the top 6 TRAJECTORY LEDs lighting up.
3. While still holding the footswitch, move the RANGE switch down for Classic mode (a single TRAJECTORY LED lights up) or up for Chords mode (the top 6 TRAJECTORY LEDs light up). If you release the footswitch before changing modes, the effect will simply engage without changing modes.
4. After selecting the mode, release the footswitch. The pedal will return to normal operation, and the effect will engage in the selected mode.

Note: The selected mode is retained even after disconnecting the pedal from power.

Connections / Application

Connecting the Whammy Ricochet Pedal to Your Rig:

1. Mute your amplifier's main volume control.
2. Make all audio connections to the Whammy Ricochet as follows.
3. Connect the recommended PS0913DC power adapter (not included) to the POWER input jack, and plug the other end into a free AC outlet.
4. Plug in your guitar and gradually increase your amplifier's main volume control until you reach your desired level.

Connection Diagram Description: The diagram illustrates the pedal's placement and connections. It shows the Whammy Ricochet as the first pedal in an effects chain. An instrument cable connects the guitar to the pedal's input. Another cable connects the pedal's output to an amplifier's input or the next pedal. An optional connection for 'OTHER PEDALS' is also shown. The diagram also highlights the PS0913DC power adapter and its connection to the pedal and a wall outlet. Text indicates to use unbalanced TS instrument cables only.

Note: The Whammy Ricochet should be the first pedal in your effects chain. Placing any effects before it may affect its pitch-shifting performance.

Example Settings

Try these settings to get started:

Killing in the Name Of (Classic)

BALLISTICS: SHIFT: (adjust to taste), RETURN: (adjust to taste)
MOMENTARY: ON
RANGE: Down
PITCH: 7th

7 String (Chords)

BALLISTICS: SHIFT: (adjust to taste), RETURN: (adjust to taste)
MOMENTARY: ON
RANGE: Up
PITCH: 5th

Whole Step Stabs (Chords)

BALLISTICS: SHIFT: (adjust to taste), RETURN: (adjust to taste)
MOMENTARY: ON
RANGE: Up
PITCH: 2nd

Dive Bombs (Classic)

BALLISTICS: SHIFT: (adjust to taste), RETURN: (adjust to taste)
MOMENTARY: ON
RANGE: Down
PITCH: Octave

Technical Specifications

Technical data is subject to change without prior notice.

WEB: digitech.com

SUPPORT: support@digitech.com

© 2022 CORTEK Corp. All rights reserved. DigiTech is a registered trademark of CORTEK Corp.

Compliance and Safety Instructions

Safety Symbols: The symbols shown are internationally recognized symbols that warn of potential hazards associated with electrical products. The lightning bolt indicates dangerous voltages within the unit. The exclamation mark in a triangle indicates that the user must read the operating manual.

These symbols warn that there are no user-serviceable parts inside the device. Do not open the unit. Do not attempt to service the unit yourself. Refer all servicing to qualified personnel. Opening the chassis for any reason will void the manufacturer's warranty. Do not expose the unit to liquids. If liquid is spilled on the unit, turn it off immediately and have it serviced. Unplug the unit during lightning storms to avoid damage.

The following indicates low-altitude operation; do not use this product above 2000m (6562 ft).

Compliance Statement:

Manufacturer: DigiTech

Manufacturer Address: 59 Hwagok-ro 61gil, Gangseo-gu, Seoul 07590 Republic of Korea

Declares that the product:

Product Name: WHAMMY RICOCHET

Product Option: All

Complies with the following product specifications:

EMC: EN 55032:2015+A11:2020, EN 55035:2017+A11:2020 FCC Part 15

Additional Information: The product complies with the following directives: 2014/30/EU EMC Directive, 2002/95/EC RoHS Directive, 2002/96/EC WEEE Directive, Regulation (EC) No 278/2009.

Contact: CORTEK Corp. 59 Hwagok-ro 61gil Gangseo-gu, Seoul 07590, Republic of Korea / support@digitech.com

Important Safety Instructions:

READ AND SAVE THESE INSTRUCTIONS. HEED ALL WARNINGS. FOLLOW ALL INSTRUCTIONS.

• Do not use this apparatus near water.
• Clean only with a dry cloth.
• For indoor use only.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• POWER SWITCH: The power switch used in this equipment does not interrupt the mains connection.
• MAINS DISCONNECT: The socket-outlet shall remain readily accessible. For rack-mounted or other installations where the mains plug cannot be readily accessed, a main switch must be incorporated into the rack or building's electrical system, with a contact separation of at least 3 mm in all poles.
• If connected to a 240 V supply, a CSA/UL certified power cord must be used for this supply.

UK Mains Plug Warning: The molded mains plug, which is cut off from the cord, is unsafe. Dispose of the mains plug at an appropriate disposal facility. NEVER insert a damaged or cut mains plug into a 13 AMP socket under any circumstances. Do not use the mains plug without the fuse cover in place. Replacement fuse covers can be obtained from your local retailer. Replacement fuses are 13 amperes and must be ASTA-approved to BS1362.

Wiring Instructions:

WARNING: THIS APPARATUS MUST BE CONNECTED TO A MAINS SOCKET-OUTLET WITH A PROTECTIVE EARTH CONNECTION.

The colours of the wires in the mains lead are in accordance with the following code:

• GREEN AND YELLOW – EARTH / BLUE – NEUTRAL / BROWN – LIVE

Since the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

• Connect the GREEN AND YELLOW wire to the terminal marked 'E' or by the earth symbol, or GREEN or GREEN AND YELLOW.
• Connect the BLUE wire to the terminal marked 'N' or BLACK.
• Connect the BROWN wire to the terminal marked 'L' or RED.

This apparatus requires the use of either a line-to-line, line-to-plug, or both connectors, depending on the power source available at the installation. If the plug needs to be replaced, it must be serviced by qualified personnel using the table below.

WARNING: IF THE EARTHING IS FAULTY, CERTAIN FAULTS IN THE UNIT OR SYSTEM MAY RESULT IN FULL MAINS VOLTAGE BEING PRESENT ON THE CHASSIS. SEVERE INJURY OR DEATH MAY RESULT FROM CONTACT BETWEEN THE CHASSIS AND GROUND.

Electromagnetic Compatibility:

This device complies with Part 15 of the FCC Rules and the product specifications in the Declaration of Conformity. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Operation within significant electromagnetic fields should be avoided. Use only shielded connecting cables.

Disposal:

When disposing of this product, do not mix it with general household waste. A separate collection system for used electronic products is in place in accordance with legislation, providing for the recovery and recycling. Contact your local authority for information on the nearest designated collection point. This ensures that the disposed product undergoes the necessary treatment, recovery, and recycling. This helps prevent potential negative impacts on the environment and human health.