Sennheiser ME 2 Clip-On Microphone
In the box
The Sennheiser ME 2 clip-on microphone package includes:
- ME 2 Clip-On Microphone
- Cable
- Clip
- Quick Guides in multiple languages (English, German, French, Italian, Spanish, Portuguese, Dutch, Polish, Swedish, Danish, Finnish, Turkish, Russian, Chinese, Japanese, Korean)
Setup
To set up the microphone, connect the 3.5 mm jack to your audio input device. Ensure the connection is secure for optimal performance.
Wearing the microphone
For best results, position the microphone approximately 25 cm (10 inches) away from the speaker's mouth. Clip the microphone securely onto clothing.
Cleaning
To clean the microphone, gently wipe it with a dry, soft cloth. Do not use liquids or cleaning agents. [❌ Water/Liquid Cleaning] ✔️ Dry Cloth Cleaning
Specifications
Transducer principle | pre-polarized condenser microphone |
---|---|
Pick-up pattern | omni-directional |
Sensitivity in free field (1 kHz) | 17 mV/Pa |
Max. SPL at 1 kHz | 130 dB |
Frequency response | 50 to 18,000 Hz |
Equivalent noise level A-weighted | 32 dB |
Connector | 3.5 mm jack |
Cable length | approx. 1.60 m |
Supply voltage | 10 V |
Diameter of microphone | 10.5 mm |
Connector assignment
The 3.5 mm jack connector is assigned as follows:
- Positive (+) terminal
- Negative (-) terminal