Installation Guide for blinds 2go models including: SmartView Electric Roman Blinds, Electric Roman Blinds, Roman Blinds, Blinds
Electric Harlow Midnight Blue Roman Blind
2022-11-18 — Installation Guide. SmartView Electric Roman Blinds. Installing the battery pack. We recommend charging the battery pack before you begin to use the blind ...
Installing the battery pack We recommend charging the battery pack before you begin to use the blind, to ensure it starts with a full battery. Use the charger plug included - the LED on the charger plug will turn green when the battery pack is fully charged. Installation Guide SmartView Electric Roman Blinds When the battery pack is charged, hook it up to the blind's motor using the motor cable. Blinds ordered as `recess fitting' Use the `hook' brackets from the fittings kit to hang the battery pack onto the back of the blind's headrail, as shown. Blinds ordered as `exact fitting' If there is not enough space behind the headrail to hang the battery pack, then it can fixed to another surface using the `clip' brackets provided. The clip brackets can be either top-fixed or face-fixed. Top-Fixing Face-Fixing Fitting the brackets Installation Guide SmartView Electric Roman Blinds The brackets offer two methods of installation: Top-Fixing Use the single hole in the top of the bracket to fix to the lintel (the `ceiling' of the recess). 5cm 5cm Face-Fixing Use two screws through the back plate to mount onto a facing surface (a wall or window frame) Note that the position of the outermost brackets should be at least 5cm away from the ends of the rail, with any other brackets evenly distributed across the width. Fitting the blind Situate the front lip of the headrail into the front of the bracket. Push the back of the headrail upwards to lock it into the back of the bracket. Download the SmartView App To release the blind from the brackets, push firmly against the blind's headrail then, still pushing against it, twist the back of the headrail downwards. Download the SMARTVIEW app On the front of the swing tag that comes with your blind, you'll find a handy QR code you can scan with your phone. Scan this to download the SmartView app - you'll be setting up your blinds in moments! Follow the instructions in the app, then flip this label to find the blind ID to add this blindAdobe PDF library 16.07 Adobe Illustrator 26.5 (Macintosh)