Shure: Microphones, Wireless microphones, in-ear monitoring, earphones, headphones - Shure USASearch Shure Products and Solutions - Shure Europe
User Guide for SHURE models including: MX415DUAL, Dual-Capsule Gooseneck Microphone
MX415DUAL Dual-Capsule Gooseneck Microphone General Description. The Shure Microflex MX415DUAL dual-capsule gooseneck microphone features two electret...
User Guides
File Info : application/pdf, 10 Pages, 489.60KB
DocumentDocumentMX415DUAL Dual-Capsule Gooseneck Microphone User guide for MX415DUAL. Version: 0.1 (2021-G) Table of Contents MX415DUAL Dual-Capsule Gooseneck Microphone 3 General Description 3 Features 3 Interchangeable Cartridges 3 Windscreen 4 Installation Dimensions Accessories Specifications Certifications Shure Incorporated 5 6 7 7 10 2/10 Shure Incorporated MX415DUAL Dual-Capsule Gooseneck Microphone General Description The Shure Microflex® MX415DUAL dual-capsule gooseneck microphone features two electret condenser cartridges mounted in a single low-profile housing and two preamp-equipped outputs providing redundant audio for critical, multi-feed live sound and professional broadcast applications. With a 15" overall length, the MX415DUAL includes a flexible top gooseneck section for optimal placement, and includes all the mounting accessories required for installation into a lectern or tabletop configura tion. Features · Wide dynamic range and frequency response for accurate sound reproduction · Dual 1 cm cardioid Microflex® interchangeable cartridges · Dual 5-foot cables exiting out bottom of mic, terminating in two TQG Connectors · Two external in-line preamps · Shock mount provides over 20 dB of isolation from surface vibration noise · RF filtering with CommShield® technology 3/10 Interchangeable Cartridges Shure Incorporated Microflex microphones use interchangeable cartridges that allow you to choose the polar pattern for different installations. Windscreen · Snap into place when fully seated. · To remove, grip under the wider sides of the foam and gently pull. · Provides "pop" protection of 30 dB for mesh and 40 dB for foam windscreens. 4/10 Shure Incorporated Installation Mount the microphone using a flange or shock mount. 5/10 Shure Incorporated Important: The dot on the microphone and TQG connector indicates which cartridge is connected to which connector. The in cluded RK100PK phantom-powered preamps converts the TQG connector to an XLR output. A13HDB Flange: 1. Mark and drill 3 starter holes for the screws using the flange as a template. 2. Secure the flange to the mounting surface with screws. 3. Thread the microphone clip to the flange, then mount the microphone to the clip. Note: Use the extension tube with the microphone clip and flange if desired. RPM640 Flange: 1. Drill a 22 mm (7/8 in.) diameter hole in the mounting surface. 2. Mark and drill 3 starter holes for the screws using the flange as a template. 3. Insert the TQG connectors through the mounting flange. 4. Slide the retaining ring over the bottom of the gooseneck base until is flush to the bottom of the flange, then press the ring firmly into place. 5. Secure the flange to the mounting surface with screws. A400SM Shock Mount: 1. Drill a 44 mm (1-3/4 in.) diameter hole in the mounting surface. 2. Mark and drill 3 starter holes for the screws using the shock mount as a template. 3. Secure the shock mount to the mounting surface with screws. 4. Insert the TQG connectors through the hole, then insert the microphone base. 6/10 Dimensions Shure Incorporated Accessories Mic Swivel Adapter Extension Tube Cast Mounting Flange Locking Mounting Flange Shock Mount Inline Preamps (2) Preamp Mounting Plates (2) Retained Foam Windscreen Veraflex Windscreen Storage Pouch A57F A26X A13HDB RPM640 A400SM RK100PK RPM40PREMNT RK415DWS A415DGWS 95E2313 7/10 Shure Incorporated Specifications Cartridge Type Electret Condenser Frequency Response 5017000 Hz Polar Pattern Cardioid Output Impedance 180 Output Configuration Active Balanced Sensitivity @ 1 kHz, open circuit voltage 35 dBV/Pa (18 mV) Maximum SPL 1 kHz at 1% THD, 1 k load 124 dB Self Noise A-weighted 28 dB SPL Signal-to-Noise Ratio Ref. 94 dB SPL at 1 kHz 66 dB Dynamic Range 1 k load, @ 1 kHz 96 dB Common Mode Rejection 10 Hz to 100 kHz 45 dB, minimum Clipping Level at 1% THD -6 dBV Polarity Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector 8/10 Weight 205 g (7.23 oz) Environmental Conditions Operating Temperature Storage Temperature Relative Humidity Power Requirements 1152 V DC, 2.0 mA 18 57°C (0 135°F) 29 74°C (20 165°F) 0 95% Shure Incorporated 9/10 Shure Incorporated Certifications Meets essential requirements of all applicable European Directives. Eligible for CE marking. The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives. For contact information please visit www.shure.com The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Global Compliance Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Email: info@shure.de www.shure.com 10/10