Timberk
T-HGS01 Handheld Garment Steamer
Instruction Manual
1. Important Information
Thank you for choosing the Timberk garment steamer. This manual contains important information regarding your safety, as well as recommendations for correct use and maintenance. Please keep this manual with your warranty card, receipt, and original packaging.
The manufacturer reserves the right to make minor changes to the device without prior notice, which do not fundamentally affect its safety, performance, or functionality. Minor misprints in text and digital notations may occur.
IMPORTANT! The safeguards and descriptions in this manual do not cover all possible situations. The manufacturer is not responsible for damage resulting from transportation, incorrect installation, voltage fluctuations, or modifications to the appliance.
NOTE: A label on the device provides necessary technical data and useful information. Use the appliance only for its intended purpose as described in this manual.
2. Safeguards
- Read the instruction manual before use and save it for future reference.
- Before first use, check that the voltage indicated on the rating label matches your home's mains voltage.
- For home use only. Do not use for industrial purposes. Use the steam iron only for its intended use.
- Do not use outdoors or in damp areas.
- When disconnecting from the power outlet, grasp the plug only; do not pull the cord.
- Keep the cord away from sharp edges and hot surfaces.
- Always unplug the device from the power supply when filling with water, emptying, or when not in use.
- [Warning] To prevent electric shock and fire, do not immerse the appliance or power cord in water or other liquids. If this happens, DO NOT TOUCH the appliance, unplug it immediately, and contact a service center.
- Do not operate the steam iron with a damaged cord or plug, or if the appliance malfunctions, has been dropped, or damaged. Do not disassemble the steam iron; take it to a service center for examination, repair, or adjustment.
- The appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities (including children) or those lacking experience or knowledge, unless they are supervised or instructed by a responsible person.
- This appliance can be used by children aged 8 and above, and persons with reduced capabilities or lack of experience, if they receive supervision or instruction on safe use and understand the associated hazards. Cleaning and maintenance should not be performed by children without supervision.
- Do not attempt to repair, adjust, or replace any parts yourself. Check and repair malfunctioning appliances only at an authorized service center.
- Children should be supervised to ensure they do not play with the appliance.
- ATTENTION! Pour water into the water tank only when the device is switched off from the mains.
- ATTENTION! To avoid burns, always unplug the garment steamer before attaching or detaching the fabric brush and allow it to cool completely.
- ATTENTION! The garment steamer generates high-temperature steam. Do not touch the steam head. Ensure the steamer head faces away from you in an upright position.
- ATTENTION! When using the garment steamer, ensure the steamer head faces away from you and is in an upright position.
- ATTENTION! It is forbidden to turn on the device without water in the tank, as this can damage the pump and cause device failure.
- If the product has been exposed to temperatures below 0°C, keep it at room temperature for at least 2 hours before use.
- Do not use accessories other than those supplied.
3. Appointment of the Device
The handheld garment steamer is easy to use and is ideal for removing wrinkles and creases from garments, curtains, and refreshing furnishing fabrics.
4. Specifications
Technical specifications are shown in Table 1.
Parameter | Units | Technical Parameters |
---|---|---|
Rated power consumption | W | 1600 |
Power supply | V/Hz | 220-240~/50 |
Steam rate | g/min | 30 |
Cord length | m | 1.8 |
Water tank | ml | 320 |
Net weight | kg | 1 |
Device dimensions | mm | 262x114x155 |
5. Device Description
Refer to Figure 1 for device components:
- 1. Holes for steam outlet
- 2. Control button
- 3. Display
- 4. Handle
- 5. Twisting protection
- 6. Removable water tank
- 7. Brush attachment
- 8. Measuring cup
- 9. Steam button
- 10. AUTO-OFF Indicator: Indicates when the appliance automatically shuts off after a period of inactivity.
- 11. High intensity steam indicator: Shows when the powerful steam mode is active.
- 12. Low intensity steam indicator: Shows when the light steam mode is active.
- 13. Heating indicator: Shows when the appliance is heating up.
*The appearance of the device may differ from the images in the manual.
6. Delivery Set
- Steamer - 1 pc.
- Measuring cup - 1 pc.
- Brush attachment - 1 pc.
- Nozzle for delicate fabrics - 1 pc.
- Instruction manual - 1 pc.
- Warranty card - 1 pc.
- Packing - 1 pc.
7. Preparations
- Pull out the water tank.
- Open the water inlet cover and fill tap water into the water tank until it reaches the maximum level.
- Put back the water tank.
ATTENTION! Pour water into the water tank only when the device is switched off from electric mains.
- Hold the appliance with your hand positioned safely at the neck of the garment steamer in an upright position. Use your other hand to attach the fabric brush onto the steam head. The fabric brush can be attached either way and will lock into position with an audible "click".
ATTENTION! For steaming delicate fabric, please use the nozzle for delicate fabrics.
ATTENTION! To avoid scalding, please always unplug the garment steamer before attaching or detaching the fabric brush and allow it to cool completely.
- Connect the device to the mains.
- Press the control button.
- The appliance will heat up. During heating, the heating indicator [heating indicator] will flash on the display. Once it stops flashing, you can start steaming.
- The steamer has two steam modes: light steam [light steam] and powerful steam [powerful steam]. Select the desired mode depending on the degree of wrinkling or the type of fabric.
- To set the desired steam mode, press the control button the necessary number of times: 1 time for light steam; 2 times for powerful steam. The indicator for the selected mode will flash on the display.
8. Steaming
- The steamer can be used on most fabrics according to the fabric label.
- The garment steamer is convenient for use on hanging fabrics. Hang garments on a hanger, slightly stretch the fabric, and check that there is nothing behind the fabric that could be damaged by the steam.
NOTE: We recommend you do not steam over metal accessories.
- To supply steam, press and hold the steam button. To stop steaming, release the button.
- Keep a distance of at least 5 cm between the steam head and the garment. Move your arm up and down. You will feel vibrations and hear a subtle humming sound while steaming; this is normal.
WARNING:
- The garment steamer generates high temperatures of steam. Do not touch the steam head. Ensure the steamer is facing away from you in an upright position.
- When using the garment steamer, ensure the steamer head is facing away from you and is in an upright position.
- When the user stops using the product for 20 minutes, the internal control circuit will cut off power, and the appliance will automatically power off. The AUTO-OFF indicator [AUTO-OFF indicator] will flash slowly, and the appliance will stop heating to prevent accidents and save electricity. Press the control button again to resume use.
After Each Use
- Switch off the appliance by pressing the power button.
- Disconnect the power cord from the power outlet.
- Disconnect the water tank and pour the water into the sink.
- Always empty the water tank after each use.
9. Care and Storage
- Always unplug the appliance before cleaning.
- Let the appliance cool down completely.
- Remove the fabric brush from its steam head.
- Clean surfaces with a damp cloth.
- Do not use harsh or abrasive cleaning agents or solvents.
- Do not immerse the garment steamer in water or any other liquid.
- Do not locate the appliance near a heat source or direct sunlight.
- Always ensure the steam outlet holes are clean and free from scaling and not blocked.
10. Scale Removing
- To prevent scale buildup inside the unit, use distilled or de-mineralized water.
- If tap water is used, scale may appear on main parts over time. It is recommended to clean it once a month.
- Prepare a solution of 50% vinegar and 50% water.
- Pour the solution into the water tank.
- Use the device running idle (without steaming garments) until the solution is used up. If needed, run it idle again.
- Rinse the water tank with running water. Pour clean water into the tank and run a cycle to flush. The steamer is now ready for use.
11. Utilization Rules, Service Life, Warranty Period
The symbol [recycling symbol] on the unit, packaging, or documentation indicates that used electrical and electronic units should not be disposed of with ordinary household waste. They must be taken to a special collection point.
For more information on waste collection systems, contact your local authority. Proper disposal helps conserve resources and prevents negative impacts on public health and the environment.
At the end of its service life, the device should be recycled in compliance with local laws, rules, and methods. Detailed information can be obtained from local authorities.
The manufacturer and authorized organizations are not responsible for the buyer's compliance with utilization laws and methods. The device's service life is indicated on the warranty card. Warranty terms and period are specified in the warranty card, which is an integral part of the documentation. If the warranty card is missing, request it from the seller.
The manufacturer and its authorized representatives disclaim responsibility for any harm caused to people, animals, or property, directly or indirectly, resulting from non-compliance with operating rules, improper installation, intentional or negligent actions of the user or third parties, or force majeure events.