CB Test Certificate
Reference Certificate Number: CA/32258M1/CSA
Product Information
Product: Switching Power Supply
Brand/Trademark: FSP
Model/Type References:
- FSP250-H24-A12XX (X=0-9, A-Z or blank)
- FSP250-H24-A24XX (X=0-9, A-Z or blank)
- FSP250-H24-A54XX (X=0-9, A-Z or blank)
Manufacturer and Applicant Details
Applicant/Manufacturer: FSP Group Inc.
Address: No. 22, Jianguo E. Road, Taoyuan 330 Taiwan
Factory: ShenZhen HuiLi Electronics CO., LTD.
Factory Address: Building C4(101~301)-C11, No. 352, LiuTang Rd., County 73, Bu'Xin Village, Xin'an, Bao'an, Shenzhen, Guangdong, P. R. China
Additional Factories:
- Wuxi SPI Technology Co., Ltd.
- ShenZhen HuiLi Electronics CO., LTD (multiple locations)
- FSP Technology Inc. Taoyuan Plant 3
- Zhonghan Electronics (Shenzhen) Co., Ltd. (multiple locations)
- Wuxi ZhongHan Technology Co., Ltd.
- ZHONGHAN SCIENCE & TECH CO. LTD
- FSP TECHNOLOGY VIETNAM CO., LTD.
Ratings and Principal Characteristics
Parameter | Details |
---|---|
Input | 100V-240Vac, 3.5A, 50-60Hz |
Output 1 | +12.0Vdc/12.5A Max. (Natural convection flow) or +12.0Vdc/20.83A Max. (14.0CFM air flow) |
Output 2 | +24.0Vdc/6.25A Max. (Natural convection flow) or +24.0Vdc/10.42A Max. (14.0CFM air flow) |
Output 3 | +54.0Vdc/2.78A Max. (Natural convection flow) or +54.0Vdc/4.63A Max. (14.0CFM air flow) |
Certification Details
Customer's Testing Facility (CTF) Stage: CTF Stage 2
Conformity Standards:
- Evaluated to the requirements of EN IEC 62368-1:2020+A11:2020
- IEC 62368-1: 2018
Test Report Reference: CB 188668-80161983(80216878)
Issuing Body: CSA Group
Issuing Body Address: 178 Rexdale Boulevard, Toronto, ON M9W 1R3 Canada
Certificate Issue Date: 2024-09-10
Signed by: William Meng
Additional Information
This test report shall be read in conjunction with CB test report No. CB 188668-80161983, dated 2023-04-06 with CB certificate CA/32258/CSA, dated 2023-04-10. Original report was modified due to include the following changes/additions:
- Add new factory: FSP TECHNOLOGY VIETNAM CO., LTD.
- Correct typo in Summary of testing and table 5.2, 5.4.4.2, 5.4.4.9, B.3, B.4
- Add evaluate test in table 5.4.9
- Add description in table B.3, B.4
- Correct typo in table 4.1.2 regarding the bobbin thickness to minimum 0.4mm.