Instructions for ORCHARD AUDIO models including: sk-module Starkrimson Amp Module, sk-module, Starkrimson Amp Module

Orchard Audio

Starkrimson Amp Module Instructions - Orchard Audio

Starkrimson Amp Module Instructions NOTES: • Due to the bridged amplifier design both speaker terminals (HL1 & HL2) are hot when the amplifier is on.

Starkrimson Module Instructions

Starkrimson Amplifier Module

PDF Starkrimson Amp Module Instructions

Starkrimson Amp Module Instructions NOTES: • Due to the bridged amplifier design both speaker terminals (HL1 & HL2) are hot when the amplifier is on.

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 139.51KB

Starkrimson® Amp Module Instructions
NOTES:
· Due to the bridged amplifier design both speaker terminals (HL1 & HL2) are hot when the amplifier is on. o Do not connect either output to ground (GND)
· Do not power up the amp without a load or speaker connected. · Do not plug in a live power supply into the amp.
Starkrimson Instructions:
To turn the amp on:
· Connect speakers · Connect Input (XLR) · Plug-in power supply into the amp (power supply must be off) · Turn on the power supply
To turn the amp off:
· Turn off the power supply and allow at least 3 minutes for all capacitors to discharge · Remove connections
Amplifier Output:
· The amplifier outputs are HL1 and HL2.
Amplifier Input:
· The amplifier input is the XLR connector
Mounting Holes:
· The module has 5 mounting holes which work with either M3 or 4-40 hardware · All mounting holes are connected to module ground
Power Supply Connection:
· The power supply should be 45.6V minimum, 58.8V maximum with a minimum output power of 250W. o Recommend Power Supply: Recom-Power RACM230-54SG (one per amp module) o If using a power supply with more than 300W output power, it is highly recommended to put a fuse inline between the power supply and amplifier.
· The mating plug is Molex / 39-01-2060, with the following pinout:



References