User Guide for EIKI models including: EBS10, 2A7I3-EBS10, 2A7I3EBS10, EBS10 Speaker System, EBS10, Speaker System
Commbax Sdn Bhd EBS10 Speaker System 2A7I3-EBS10 2A7I3EBS10 ebs10
EBS10 User Guide Brilliant of Sound Clarity * Please read instructions before using Buttons and operational instructions Front Buttons and ports Switch Mode:Switching between Bluetooth, FM Radio, Flash Drive and AUX Input mode Previous Song/Vol Down:Press for Previous Song, Hold and press Volume Down Play/Pause:Press to play or pause. Press and hold for connecting or disconnecting the slave unit Next Song/Vol Up:Press for Next Song, press and hold for Volume Up Switch Device:On/Off Button AUX Port:AUX Audio Input Light:Indicator Light Type C Port:5V 2A Charging Port USB Port:Support MP3,WMA and other mainstream audio formats Connect the Bluetooth The first time connection, change to Bluetooth mode press M key (Switch Mode) button. Turn on Bluetooth mode on mobile device, search for "EBS10" and pairing. There will be a prompt sound after pairing is successful. Disconnect Bluetooth Method 1: Press and hold M Key (Switch Mode) Method 2: lPress and hold "BT" button above the remote control. Connect 2 units at the same time Press and hold on play/pause button for about 3 seconds Complete the same step settings; If you need to disconnect the synchronization, you can press and hold on Play/Pause button about 3 seconds. Tips: It is recommended to put the two speakers nearer before synchronization for a smoother operation. FM Selection Mode Long press Play/Pause button up to 3 seconds. Speaker will auto search for FM channel. Once done, press on Next or Previous bottom for FM channel selection. Remote button instructions Please insert 2 x AA battery on the remote before using. This is an infrared remote control, the coverage will be in front of speaker and up to 45 degree ratio sensitive (left & right) Speaker Remote Area Remote Controller Indicator Light On/Off Vol Up Previous Bluetooth Mode Press and hold to connect or disconnect current speaker Radio Mode Sequential Loop Single Loop Play/Pause Next Vol Down USB Mode Aux Input Mute Product Description An Ultra-Portable / Wall-Mount Speaker with the Latest Design Equipped with the latest technology including Bluetooth 5.1 & USB-C, T2 Plus is engineered to deliver deep bass and punchy sound in a compact size. Deep Bass, Powerful Audio 20W of deep bass and punchy sound delivered from 2 full-range speaker drivers and a passive radiator. All-Day Playtime Keep your favorite playlist going on with up to 14 hours / 500 songs on a single charge. *On a 50% volume level. Stereo Sound, Double Fun Pair up to two speaker for a more stereo surround sound to bring your party to life. Product Specifications Specification:Power Out: 2x10W=20W Speaker Size: 66mmX2 +modals 42mmX78mmX2 Speaker Material: Neodymium Magnet Frequency Range: 60-20kHz SNR: 86dB Distortion Factor: 1% Receive Distance: More Than 10m Bluetooth Version: 5.1 Charging: USB Type-C 5V/2A Input: AUX (3.5mm) Input, USB Input & FM Radio USB Support Format: WAV, MP3, WMA, APE, FLAC Built-in Lithium Battery: 5000mah Charging Time: 4 hours Working Time : Min 14hours Product Size: 198x198x45mm Product Weight: 590g Color of Speaker: White Package Come With:2m USB Charging Cable and Remote Control Product packaging list 1.Main Product 2.User Guide 3.Wall accessories(including screws) 4.Charging cable 5. Remote controller Warranty Card Product model Purchase from Purchase date Buyer Detail Name: Address: Phone: Maintenance Record Description Processing Sign: Tips:Please keep this card for warranty purposes This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.Adobe PDF library 15.00