GHome Smart SW19 Ceiling Fan & Light Dimmer Switch User Manual

Product Overview

This document provides instructions for the GHome Smart Ceiling Fan & Light Dimmer Switch, Model SW19.

Wi-Fi Support: 2.4G Wi-Fi connection required. Ensure your mobile phone and device are connected to the same 2.4G Wi-Fi network.

Device Indicators:

• On/Off Button (Reset Button) ?: Controls power and is used for resetting.
• Light Indicator ?: Shows the status of the light.
• Fan Indicator ?: Shows the status of the fan.
• Status Light: Slow blinking ? indicates readiness for AP Mode connection and Bluetooth Auto-Discovery Mode connection. White ⚪ indicates the switch is ON.

Specifications:

• Input: 120V~50/60Hz, 4A
• Fan Max Power: 120W
• Light Max Power: 400W
• Max Output: 150W LED, 150W CFL, 400W INC, 1A ceiling fan
• Operating Temperature: -10~40°C

FCC ID: 2BGPL-SW19

[Diagram: GHome Smart switch with labels for On/Off (Reset) button, Light Indicator, Fan Indicator, and status light.]

Before You Install

Installation Tips!

⚠️ WARNING: SHOCK HAZARD

Incorrect installation may be dangerous or illegal. Multiple circuit breakers may need to be de-energized for safe installation. If you are unfamiliar with electrical work, please call a professional electrician.

Wire Identification:

• Neutral Wire: Typically white or grey. Allows the switch to be powered while the lighting circuit is off.
• Ground Wire: A bare copper wire providing a path to the earth.
• Line Wire (Live Wire): Carries electric current. A voltage tester will indicate if power is present.
• Load Wire: Connects the switch to the light fixture. Often attached to a brass terminal on the previous switch; sometimes black or red.

If the wires in your switch wall box differ from the descriptions below, consult a qualified electrician.

Identify Wires By Color:

Tip #1: Look at wire colors for identification.

• Neutral: White or Grey
• Ground: Bare Copper
• Load: Red or Black
• Line: White or Black

If Line and Load Are Both Black:

Tip #2: The Load wire usually comes from the top of the box; the Line wire generally comes from the bottom.

Tip #3: Before removing the switch, test each wire with a voltage tester.

⚠️ CAUTION: Risk of electric shock. Do NOT touch any wires during this process.

• After removing the face plate, briefly turn the breaker back on.
• Carefully press a non-contact voltage tester against each wire.
• The tester will indicate when a wire is hot (carrying current).
• The hot wire is the Line wire.
• The wire that does not show current is the Load wire.

⚠️ CAUTION: Risk of electric shock. Before continuing, ensure the power breaker is OFF.

[Diagram: Illustrates common wire colors for Neutral, Ground, Load, and Line.]

[Diagram: Shows using a voltage tester to identify the hot (Line) wire when both Line and Load wires are black, indicating the Load wire is typically from the top and Line from the bottom.]

Installation Steps

Install the GHome Smart Ceiling Fan & Light Dimmer Switch

1. Step 1: Shut OFF Power. Turn off the power at the circuit breaker for the switch you are replacing. You may need to turn off multiple breakers to ensure the correct switch is de-energized. ❗ IMPORTANT: USE A NON-CONTACT VOLTAGE DETECTOR OR FLIP YOUR LIGHT SWITCH A FEW TIMES TO MAKE SURE THAT THE POWER IS OFF.

   [Diagram: Hand turning off a circuit breaker.]

2. Step 2: Disconnect Old Switch. Unscrew and disconnect the wires from the old switch using a screwdriver. Remove the wall plate from the switch. Pull the old switch away from the wall.

   [Diagram: Screwdriver removing screws from an old switch and wires being disconnected.]

3. Step 3: Connect Wires. Disconnect all wires from the old switch. Connect the wires to the new Smart Ceiling Fan & Light Dimmer Switch terminals in the following order:

   • Neutral-In: Connect the Neutral wire.
   • Live-In: Connect the Line wire.
   • Fan-Out: Connect the Fan wire.
   • Led-Out: Connect the Light wire.
   • Ground: Connect the Ground wire.

   Insert each wire into its corresponding terminal and tighten the screw securely. Close the top cover.

   [Diagram: Shows wires being connected to the terminals: Neutral-In, Live-In, Fan-Out, Led-Out, Ground.]

4. Step 4: Mount Device. Mount the device using the provided screws. If installing next to other devices, ensure the wall plate has the correct number of openings.

   [Diagram: New switch being mounted into the wall box with screws.]

5. Step 5: Turn Power ON. Turn the power back on at the circuit breaker.

   [Diagram: Hand turning on a circuit breaker.]

How to Download the Gosund App

Option 1: Search for "Gosund" in the Apple App Store or Google Play.

Option 2: Scan the QR code [QR code for app download] to enter the download page.

How to Pair with the App

1. Open the "Gosund" app and create your account.
2. Turn on the switch and place it near your router for pairing.
3. Press and hold the ON/OFF button for 5 seconds until the switch starts blinking slowly to enter network pairing mode.

Connect your phone to your Wi-Fi router. Tap the "+" icon in the top right corner of the homepage to add a device. You can add a device in two ways:

1) Bluetooth Auto-Discovery Mode (✅ Recommended)

The app will prompt you to turn on Bluetooth and Wi-Fi on your phone. Select the device you want to add. Enter your Wi-Fi name and password (supports 2.4G Wi-Fi only). The device will automatically connect to the network.

2) Slow Flash Mode (AP) ⚡

If Bluetooth pairing fails, try AP mode. Select "SW19" under "Electrician". Enter your Wi-Fi name and password (supports 2.4G Wi-Fi only). Choose "Slow Blink" to ensure the LED indicator blinks slowly. Connect your phone to the device's hotspot (e.g., "SmartLife-XXXX"). Return to the app interface; it will automatically connect to the router, completing configuration.

⚙️ Reset

Turn on the power, then press and hold the Reset button for 5 seconds. Release when the switch starts to flash slowly; the reset is successful.

If the switch is moved to a new network environment, restore factory settings and reconnect to the network.

? Warnings and Precautions

• Keep out of reach of children and pets. ??
• Do not use this product in humid environments or outdoors. It's for indoor use only. ???
• Do not place this product near heating devices, such as microwave ovens, stoves, or radiators. ♨️
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, vapors, and solvents. ?️☀️⚡??
• Do not disassemble, modify, or repair your device. Seek help from authorized professionals for device malfunction. ?️
• Do not use the device if it is malfunctioning or visibly damaged. ❌
• Avoid storing the device for extended periods in poor ambient conditions. ?
• Never use aggressive detergents such as rubbing alcohol or other chemical solutions, as these could damage the casing or impair the product's function. ?

Note: Images shown in the manual are indicative only. If there is inconsistency between the image and the actual product, the actual product shall govern. ?️

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• -- Reorient or relocate the receiving antenna.
• -- Increase the separation between the equipment and receiver.
• -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• -- Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

FCC ID: 2BGPL-SW19