Fanttik X8 APEX Air Inflator User Manual
Product Overview
The Fanttik X8 APEX is a highly capable air inflator designed for a wide range of tasks, featuring a large LED screen and an easy-to-use interface.
Key components of the device:
- 1. Battery indicator: Displays the remaining battery level.
- 2. Real-time pressure value: Shows the current pressure of the item being inflated.
- 3. Target pressure value: Displays the preset pressure you want to reach.
- 4. Power button: Used to turn the inflator on/off and start/stop inflation.
- 5. Light button: Controls the built-in LED light.
- 6. Preset mode indicator: Shows which inflation mode (e.g., Car, Bicycle) is currently selected.
- 7. Pressure unit: Displays the current pressure unit (psi, bar, kPa).
- 8. "+" button: Increases the target pressure value.
- 9. Mode button: Cycles through preset inflation modes and pressure units.
- 10. "-" button: Decreases the target pressure value.
- 11. Air outlet: Where the air tube connects for inflation.
- 12. USB-A port: For using the inflator as a power bank.
- 13. USB-C port: For charging the inflator.
Package Contents
Essential Version
- User manual 1
- PU box 1
- X8 Apex air inflator 1
- Schrader-Presta valve adaptor 1
- Needle valve adaptor 1
- Air tube 1
- USB charging cable 1
- Storage bag*1
X8 APEX Kit
- User manual 1
- X8 Apex air inflator 1
- Schrader-Presta valve adaptor 1
- Needle valve adaptor 1
- Air tube 1
- USB charging cable 1
- Storage bag*1
Carefully check the package contents. If anything is missing or damaged, please contact online customer service for support.
Battery Level Indicator & Charging
Battery Level Indicator
The battery level is shown by four bars, with each bar representing 25% of the charge.
- 1 bar: under 25%
- 2 bars: between 25% and 50%
- 3 bars: between 50% and 75%
- 4 bars: between 75% and 100%
The battery indicator will flash when the battery level is below 20%.
Charging
Fully charge the inflator before using it for the first time. To charge, connect it to a certified 5.0V/3A USB charger with the included charging cable.
Battery indicator during charging:
- 1 bar flashing: under 25%
- 1 bar solid, 2nd bar flashing: between 25% and 50%
- 2 bars solid, 3rd bar flashing: between 50% and 75%
- 3 bars solid, 4th bar flashing: 75% and 100%
- All 4 bars solid: fully charged
The inflator will automatically switch off if left inactive for 5 minutes after being fully charged.
The inflator cannot be used while it is charging.
The USB charger is sold separately. Make sure to use a certified charger.
Turning the Inflator On/Off
ON: Long-press the power button for 1.5 seconds to turn on.
OFF: When the inflator is turned on, long-press the power button for 1.5 seconds to turn off.
The inflator will automatically turn off in the following cases:
- After 3 minutes of inactivity.
- When the charging cable is disconnected during charging.
- After 5 minutes of inactivity after being fully charged.
- When the inflator is being used as a power bank, after disconnecting the other device.
- If inflating for over 5 minutes when the target pressure value is below 5psi.
- If inflating for over 3 minutes when the target pressure value is above or equal to 120psi.
Connecting the Air Tube and Nozzle
Connecting the Air Tube
Connect one end of the air tube (with screw thread) to the inflator before inflating.
Valve Types and Adapters
Schrader Valve: Used on cars, motorcycles, e-bikes, and most mountain bikes. The inflator can connect directly. To deflate, use a tool to press the pin inside the valve.
Presta Valve: Used on road bicycles and some mountain bikes. Requires the included Presta valve adapter. Connect the adapter to the Schrader end of the air tube, unscrew the Presta valve ring, and then connect to the tire valve. To deflate, unscrew the ring and press the valve stem.
Needle Valve Adapter: Used for inflating balls like basketballs and footballs. Screw the needle valve adapter onto the Schrader valve adapter, then insert the needle into the ball's valve. To deflate, insert the needle and gently apply pressure to the ball.
Detecting the Current Pressure
When the inflator is turned on, connect the air tube to the device to be inflated. The LED screen will display the current pressure value.
Determining the Right Pressure Value
To avoid injuries from over-inflation, always be aware of the maximum inflation pressure before starting.
Tires
Recommended air pressure for tires is indicated on the tire's sidewall or on the inside of the driver's side door for cars. Refer to your vehicle's manual for load capacity and specific recommendations.
Balls
Recommended air pressure for balls is indicated near the ball's air valve.
Air Pressure Reference Table
| Category | Type | Recommended Pressure Range |
|---|---|---|
| Bicycles | Electric Folding Bike tires | 10 - 50psi |
| Bicycles | 12-, 14-, & 16-inch bicycle tires | 30 - 50psi |
| Bicycles | 20-, 22-, & 24-inch bicycle tires | 40 - 50psi |
| Bicycles | 26-, 27.5-, & 29-inch mountain bike tires | 45 - 65psi |
| Bicycles | 700c road bike clincher tires | 40 - 50psi |
| Bicycles | 700c road bike tubular tires | 100 - 130psi |
| Motorcycles | Electric Scooter tires | 120 - 145psi |
| Motorcycles | Scooter & street motorcycle tires | 1.8 - 3.0bar |
| Cars | Car tires | 2.2 - 2.8bar |
| Balls | Basketball | 7 - 9psi |
| Balls | Soccer ball | 8 - 16psi |
| Balls | Volleyball | 4 - 5psi |
| Balls | Football | 12 - 14psi |
Pressure range values are for reference only. Always refer to the instructions or manual of the item being inflated for actual inflation pressure specifications. (The data above is from the QiCYCLE lab.)
Preset Pressure Value
You can switch between five inflation modes and cycle through pressure units (psi/bar/kPa) using the Mode button.
The top number on the screen shows real-time pressure, and the bottom number shows the preset pressure.
- Manual mode: No mode icon is displayed. The preset pressure is adjustable and saved. Adjustable Range: 3-150psi / 0.2 - 10.3bar.
- Car Mode: Default 2.5bar. Adjustable Range: 1.8-3.5bar.
- Bicycle Mode: Default 45psi. Adjustable Range: 30-145psi.
- Motorcycle Mode: Default 2.4bar. Adjustable Range: 1.8-3.0bar.
- Ball Mode: Default 8psi. Adjustable Range: 4-16psi.
In manual mode, the last set target pressure is saved as the default. For best results with balls, use Ball Mode.
Adjusting the Preset Pressure
After selecting a mode, press the '+' or '-' buttons to adjust the target pressure. Press and hold these buttons for faster adjustment.
Light
Press the light button to turn the inflator's LED light on/off. The light aids visibility in dark conditions.
When the light is on, press the light button again to cycle through Spotlight, SOS, and OFF modes.
The light will automatically turn off after 30 minutes of inactivity.
Inflating
Start Inflating
Press the Power button to start inflating. The current pressure is displayed in real-time.
The inflator can be as loud as 75-80 dB during operation. Take appropriate precautions to protect your hearing. The air compressor and air tube can become hot after prolonged use; avoid skin contact to prevent burns.
Stop Inflating
The inflator automatically stops when the target pressure is reached. You can also manually stop inflation at any time by pressing the Power button.
Caution: Items like balloons, beach balls, and swim rings may require pressure below the inflator's minimum range and cannot be automatically inflated. Inflate these items manually with care.
Battery Information
On a full charge, the inflator's battery lasts approximately 40 minutes when running without a load at 25°C. Battery life may be reduced under heavy load or at lower temperatures.
Disconnecting the Air Tube
The air hose can become hot after inflating. Exercise caution when disconnecting it from a valve to prevent burns. Some air may escape during disconnection; quickly detach the hose to minimize pressure loss.
Power Bank Function
The inflator can function as a 5V/2A power bank when not charging or inflating other devices. The battery must have a sufficient charge level.
The inflator must be turned on to use as a power bank. If inactive for 3 minutes, it enters "Energy Saving" mode, displaying only the battery icon. In this mode, it will automatically turn off when the charged device is disconnected.
Troubleshooting
| Problem | Solution |
|---|---|
| Slow inflation speed |
|
| Air compressor turns on but does not inflate |
|
| Unable to increase or decrease the preset pressure | Ensure the inflator is in Manual mode (blank display without icons). The adjustable range is 3 - 150 psi. |
| The inflator inflates normally but the displayed pressure is zero | The pressure of low-pressure inflatables (like balloons) is too low to be measured by the sensor. |
| Air leakage after connecting the air tube | Make sure the air hose is securely connected. |
| The battery level indicator is different when inflating compared to standby state | The lithium battery's voltage level drops significantly during discharge, causing the indicator to display differently. This is normal. |
| The battery level indicator doesn't show on the screen after charging | Use a certified adapter and the included charging cable, and try charging again. |
| The inflator cannot charge other devices |
|
| None of the above. The inflator doesn't react with any input | Simultaneously press the light button and mode button to restart the inflator. |
Specifications
| Name | Model | Executive Standard | Dimensions | Inflation Pressure Range | Operating Temperature | Storage Temperature | Air Valve Dimensions | Battery Capacity | Working Noise | Input | Output | Input Port | Output Port | Charging Time | Sensor Accuracy |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Air Inflator | X8 APEX | QXMQJ0002-2019 | 200.5×63.5×63.5mm (Excluding air tube) | 3-150psi / 0.2-10.3bar | Charging: 0~45°C, Discharging: -10~45°C | -10~45°C | Length 350mm | 2600mAh (28.86 Wh) | Lower than 80dB within 1 meter | 5V/3A | 5V/2A | USB Type-C | USB-A | <4 hours | ±2psi |
Safety Instructions
- This product is not a toy and should not be used by children. Users should be above 16 years old. Keep a safe distance between children and the inflator while inflating.
- The product contains a built-in lithium battery. Do not place the product in fire or dispose of the battery improperly. Overheating, damage, or water exposure can increase the risk of fire or explosion. Keep the product away from heat sources and avoid leaving it in hot cars for extended periods. If the inflator becomes very hot, there is a risk of explosion.
- Store the product in temperatures ranging from -10°C to 45°C. Extreme temperatures can damage the battery and shorten the inflator's lifespan.
- Long-term storage may decrease battery effectiveness. Charge the inflator at least once every three months to maintain its performance.
- The product has a built-in DC motor that may generate sparks during operation. Do not use it in environments with flammable dust or gas.
- If you notice unusual noise or excessive heat during inflation, turn off the inflator immediately.
- Before setting the inflation pressure, ensure the correct pressure unit (psi, bar, kPa) is selected. Incorrect unit selection can lead to dangerous overinflation. Unit conversion: 1 bar = 14.5psi, 1 bar = 100kPa.
- Do not leave the inflator unattended while it is in operation.
- Use the product in a dry and clean environment. Sand and dust intrusion can cause damage. Do not wash the product with water.
- Use a certified 5V/3A adapter and the included charging cable for charging. Malfunctions caused by non-compliance are not covered by the warranty.
- After prolonged use, the junction between the air tube and the main body can become very hot. Avoid touching it to prevent burns.
- The inflator is equipped with short-circuit protection. Do not connect its USB-A port with its USB-C port.
Caution: To reduce the risk of electric shock, do not expose to rain. Store indoors.
Warranty Information
Your Warranty Includes
12-Month Coverage: Within 12 months of purchase, Fanttik provides timely and effective online after-sales service. Defective products (due to manufacturing faults) will be repaired or replaced within the warranty period.
How to Return Your Fanttik Product
Contact support@fanttik.com with your order number. You will receive a return label. Fill out the 'Return Details' page and include it in your return package. Replacements/refunds will be processed upon receipt of the return package.
Contact: support@fanttik.com | www.fanttik.com
Return Details
To expedite your return, please fill out the following information and include it in your return package:
- Purchase Name:
- Order Number:
- Date of Purchase:
- Your Email Address:
- Place of Purchase:
If your purchase was fulfilled by Amazon, please use Amazon's 30-day return service.
