User Manual for DVDO models including: DVDO-Splitter-14-CAT 4K 1x4 HDMI Splitter with CAT Outputs, DVDO-Splitter-14-CAT, 4K 1x4 HDMI Splitter with CAT Outputs, HDMI Splitter with CAT Outputs, CAT Outputs
File Info : application/pdf, 14 Pages, 519.74KB
DocumentDocumentDVDO-Splitter-14-CAT 4K 1x4 HDMI Splitter with CAT Outputs User Manual Version v1.0 DVDO +1.408.213.6680 support@dvdo.com www.dvdo.com Thank you for purchasing DVDO-Splitter-14-CAT For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended DVDO-Splitter-14-CAT contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. Table of Contents 1. Introduction. ....................................................................................... 1 2. Features............................................................................................... 1 3. Package Contents. ............................................................................ 1 4. Specifications. .................................................................................... 2 5. Operation Controls and Functions. ................................................... 3 5.1 Transmitter. .................................................................................... 3 5.2 CAT Receiver. ............................................................................... 5 5.3 IR Pin Definition.............................................................................. 6 6. EDID Mode. ......................................................................................... 7 7. ASCII Commands. .............................................................................. 8 8. Application Example. ........................................................................ 11 1. Introduction DVDO-Splitter-14-CAT is an 18Gbps HDMI 1x4 splitter that can distribute 1 HDMI source signal to any 4 display devices, with video resolutions up to 4K2K@50/60Hz 4:4:4. It is designed with 1 HDMI loop output and 4 CAT outputs. The HDMI signal transmission distance can be extended up to 115ft/35m at the resolution of 4K2K@60Hz, or 164ft/50m at 4K2K@30Hz, or 197ft/60m at 1080p@60Hz via a single CAT6/6a/7 cable. DVDOSplitter-14-CAT supports one-way IR control signal pass-through, audio extract function and advanced EDID management. 2. Features HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant Support 18Gbps video bandwidth Support video resolution up to 4K2K@50/60Hz 4:4:4 Support HDR, HDR10+, HLG and Dolby vision Support up to 7.1CH HD audio pass-through Support digital and analog audio de-embedded output Extend the signal transmission distance up to 35 meters at the resolution of 4K2K@60Hz, 50 meters at 4K2K@30Hz, 60 meters at 1080p@60Hz via a single CAT6/6a/7 cable Support 1 HDMI input, 1 HDMI loop output and 4 CAT outputs. Support one-way IR control signal pass-through Advanced EDID management Support one-way POC function (only from transmitter to receiver) Compact design for easy and flexible installation 3. Package Contents 1 x 18Gbps 1x4 HDMI Splitter over 60m CAT 4 x CAT Receivers 1 x IR Blaster Cable (1.5m) 4 x 20K~60KHz IR Receiver Cable (1.5m) 1 x 12V/2.5A DC Locking Power Adapter 1 x User Manual -1- 4. Specifications Technical HDMI Compliance HDMI 2.0b HDCP Compliance HDCP 2.2/1.x Video Bandwidth 594MHz/18Gbps Video Resolution Up to 4k2k@50/60Hz 4:4:4 Color Depth 8-bit,10-bit,12-bit(1080p@60Hz) 8-bit (4K2K@60Hz YUV4:4:4) 8-bit,10-bit,12-bit(4K2K@60Hz YCbCr 4:2:2/4:2:0) Color Space RGB, YCbCr 4:4:4 / 4:2:2. YUV 4:2:0 HDR Support HDR10, HDR10+, HLG, Dolby vision LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, HDMI Audio Formats Dolby Digital Plus(DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X Coaxial Audio Formats PCM2.0, Dolby Digital / Plus, DTS 2.0/5.1 Analog Audio Formats PCM 2.0CH ESD Protection Human body model--±8kV (Air-gap discharge) & ±4kV (Contact discharge) Connection Input Output 1×HDMI Type A (19-pin female) 1×HDMI Type A (19-pin female 4x CAT OUT [RJ45, 8-pin female] 1x Coaxial Audio OUT [RCA] 1x L/R Audio OUT [3.5mm Stereo Mini-jack] Control 1×SERVICE (Micro USB, Update port 1x EDID DIAL switch [5-pin] 1x IR OUT [3.5mm Stereo Mini-jack] -2- Mechanical Housing Metal Enclosure Silkscreen Color Black Dimensions Transmitter: 210mm (W) × 100mm (D) × 25mm (H) Receiver: 88mm (W) × 61mm (D) × 18mm (H) Weight Power Supply Transmitter: 617g Receiver:155g Input: AC100 - 240V 50/60Hz, Output: DC 12V/2.5A (US/EU standards, CE/FCC/UL certified) Power Consumption 14W Operation Temperature 0°C ~ 40°C / 32°F ~ 104°F Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F Relative Humidity 20~90% RH (non-condensing) 5. Operation Controls and Functions 5.1 Transmitter Panel Front Panel No. Name Function Description 1 POWER switch Press this switch to power on/off the device. 2 POWER LED When the device is powered on, the red power LED will be on. 3 IN LED When the HDMI IN port connects an active source device, the green LED will be on. 4 LOOP LED 5 OUT LED (1~4) When the HDMI LOOP OUT port connects an active display device, the green LED will be on. 1/5 When the CAT OUTPUT port connects the CAT IN port of CAT receiver, the corresponding green OUT LED will be on. -3- Rear Panel No. Name Function Description 1 AUDIO OUT Coaxial/analog audio output port, connect to amplifer (COAX, L/R) or speaker. 2 HDMI port IN: HDMI input port, connect to HDMI source device such as DVD or set-top box with an HDMI cable. LOOP OUT: HDMI loop output port, connect to the HDMI display device such as TV or Monitor with an HDMI cable. 3 CAT OUTPUT Connect to the CAT IN port of the CAT receiver with port (1~4) a CAT cable. 4 Link Signal Indicator lamp (Green) Illuminate: T1r/a5nsmitter Dark: Transmitter and and receiver receiver are are connected. not connected. Data Signal Illuminating: HDMI signal with HDCP. 5 Indicator lamp Flashing: HDMI signal without HDCP. (Orange) Dark: No HDMI signal. 6 IR OUT Connect the IR Blaster cable to transmit IR signal from the CAT receiver. 7 DC 12V Plug the DC 12V power supply into the unit and connect the adaptor to an AC outlet. (Note: The transmitter can power the receiver via a CAT cable.) Side Panel No. Name Function Description 1 EDID DIAL switch Used to set EDID mode. Please refer to Section "6. EDID Mode" for details. 2 SERVICE port Used for firmware update or serial port command control. Please refer to "7. ASCII Commands". -4- 5.2 CAT Receiver No. Name 1 HDMI OUT 2 CAT IN Function Description HDMI output port, connect to HDMI display device such as TV or Projector with an HDMI cable. Connect to the CAT OUTPUT port on the transmitter with a CAT cable. 3 Power Indicator When the receiver is powered on, the power indicator Lamp (Green) lamp will be on. Data signal Illuminating: HDMI signal with HDCP. 4 Indicator Lamp Flashing: HDMI signal without HDCP. (Orange) Dark: No HDMI signal. 5 SERVICE port Used for firmware update. 6 IR IN Connect to the IR Receiver cable. The IR signal will send to the IR OUT port of the transmitter. 7 DC 12V Plug DC 12V/1A power supply into the unit and connect the adapter to an AC outlet. (Note: The CAT receiver also can be powered by the transmitter via a CAT cable. ) -5- 5.3 IR Pin Definition Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters. -6- 6. EDID Mode Below is the list of EDID settings for DVDO-Splitter-14-CAT: EDID Mode EDID Description 11111 1080p, Stereo Audio 2.0 11110 1080p, Dolby/DTS 5.1 11101 1080p, HD Audio 7.1 11100 1080i, Stereo Audio 2.0 11011 1080i, Dolby/DTS 5.1 11010 1080i, HD Audio 7.1 11001 1080p 3D, Stereo Audio 2.0 11000 1080p 3D, Dolby/DTS 5.1 10111 1080p 3D, HD Audio 7.1 10110 4K2K30Hz_444, Stereo Audio 2.0 10101 4K2K30Hz_444, Dolby/DTS 5.1 10100 4K2K30Hz_444, HD Audio 7.1 10011 4K2K60Hz_420, Stereo Audio 2.0 10010 4K2K60Hz_420, Dolby/DTS 5.1 10001 4K2K60Hz_420, HD Audio 7.1 10000 4K2K60Hz_444, Stereo Audio 2.0 01111 4K2K60Hz_444, Dolby/DTS 5.1 01110 4K2K60Hz_444, HD Audio 7.1 01101 4K2K60Hz_444, Stereo Audio 2.0 HDR 01100 4K2K60Hz_444, Dolby/DTS 5.1 HDR 01011 4K2K60Hz_444, HD Audio 7.1HDR 01010 COPY_FROM_LOOP OUT 01001 COPY_FROM_CAT OUT1 01000 COPY_FROM_CAT OUT2 00111 COPY_FROM_CAT OUT3 00110 COPY_FROM_CAT OUT4 00101 1080p, Stereo Audio 2.0 00100 1080p, Stereo Audio 2.0 00011 1080p, Stereo Audio 2.0 00010 1080p, Stereo Audio 2.0 00001 1080p, Stereo Audio 2.0 00000 PC control mode -7- 7. ASCII Commands DVDO-Splitter-14-CAT also supports ASCII command control. Connect the SERVICE port of the unit to a PC with a USB cable. Then, open a Serial Command tool on a PC to send ASCII commands to control the unit. Below is the list of ASCII commands for DVDO-Splitter-14-CAT: ASCII Commands Serial port protocol. Baud rate: 115200, Data bits: 8bit, Stop bits:1, Check bit: 0 x - Parameter 1 y - Parameter 2 ! - Delimiter Command Code Power Function Description Example Feedback Power on Default Setting s power z! r power! s reboot! Power on/off the device,z=0~1 s power 1! (z=0 power off, z=1 power on) Get current power state Reboot the device r power! s reboot! System Initializing... power on Initialization Finished! FW version x.xx.xx power on/power off reboot System Setup help! r type! List all commands Get device model help! r type! r status! Get device current status r status! Get the unit all status: power, in/out connection, edid mode r fw version! Get Firmware version r fw version! MCU BOOT: Vx.xx.xx MCU APP: Vx.xx.xx r link in! Get the connection status of the input port r link in! HDMI IN: connect r link out y! r link loop out y! Get the connection status of the y output port y=0~4(0=all, 1~4=CAT 1~4) Get the connection status of the y loop output porty=1 s reset! Reset to factory defaults r link out 1! CAT OUT1: connect r link loop out 1! HDMI LOOP OUT: connect Reset to factory defaults s reset! System Initializing... Initialization Finished! FW version x.xx.xx -8- Command Code Function Description Example Feedback Default Setting Output Setting Set hdmi loop output stream s hdmi stream z! on/off z=0~1(0:disable,1:enable) Enable hdmi loop out s hdmi stream 1 ! stream Disable hdmi loop out enable stream Enable cat output 1 stream Disable cat output 1 s cat y stream z! Set cat output y stream y=0~4(0=all) z=0~1 on/off, s cat 1 stream 1 ! stream Enable cat all outputs enable (0:disable,1:enable) s cat 0 stream 1 ! stream Disable cat all outputs stream r hdmi stream! Get hdmi loop out stream status r hdmi stream! Enable hdmi loop output stream r cat y stream! Get cat output y y=0~4(0=all) stream status, r cat 1 stream! Enable cat output 1 stream s hdmi hdcp z! set hdmi loop output port hdcp status s hdmi hdcp 1! hdmi loop out hdcp on all hdmi out hdcp active r hdmi hdcp! Get HDCP status of loop out r hdmi hdcp! hdmi loop out hdcp on s cat y hdcp z! set cat output y port hdcp status y=0~2(0=all) z=0~1 (1=on,0=off) s cat 1 hdcp 1! cat out 1 hdcp on all cat out hdcp active r cat y hdcp! Get HDCP status of cat out y, y=0~2(0=all) r cat 1 hdcp! cat out 1 hdcp on s cat y dsc mode z! set cat output y port dsc mode status y=0~4(0=all) z=1~3 (1=Cat cable distance normal s cat 1 dsc Mode, 2= Cat cable distance mode 2! 35M Mode,3= Cat cable distance 70M Mode) Cat cable cat out 1 dsc mode 2 distance 35M Mode(35M) r cat y dsc mode! Get dsc mode y=0~4(0=all) of cat out y, r cat 1 dsc mode! cat out 1 dsc mode 2 s audio mute 1! set audio output port mute status (1-mute, 0-umute) s audio mute 1! s audio mute 1 s audio unmute (0) r audio mute! Get audio output mute status r audio mute! audio mute 1 -9- Command Code Function Description Example Feedback Default Setting EDID Setting Set input EDID from default EDID z, z=1~26 1, 1080p,Stereo Audio 2.0 2, 1080p,Dolby/DTS 5.1 3, 1080p,HD Audio 7.1 4, 1080i,Stereo Audio 2.0 5, 1080i,Dolby/DTS 5.1 6, 1080i,HD Audio 7.1 7, 3D,Stereo Audio 2.0 8, 3D,Dolby/DTS 5.1 9, 3D,HD Audio 7.1 10, 4K2K30_444, Stereo Audio 2.0 11, 4K2K30_444, Dolby/DTS 5.1 input EDID:1080p, 12, 4K2K30_444,HD Audio 7.1 Stereo Audio 2.0 13, 4K2K60_420, s edid in from z! Stereo Audio 2.0 14, 4K2K60_420, Dolby/DTS 5.1 s edid in from 1! 15, 4K2K60_420,HD Audio 7.1 Please toggle EDID 16, 4K2K60_444, dip switch to 00000! Stereo Audio 2.0 17, 4K2K60_444, Dolby/DTS 5.1 18, 4K2K60_444,HD Audio 7.1 19, 4K2K60_444, Stereo Audio 2.0 HDR 20, 4K2K60_444, Dolby/DTS 5.1 HDR 21, 4K2K60_444, HD Audio 7.1 HDR 22, copy from hdmi loop out 23, copy from cat output 1 24, copy from cat output 2 25, copy from cat output 3 26, copy from cat output 4 1080p,Stereo Audio 2.0 r edid in! Get EDID status of the input r edid in! input EDID: 4K2K60_ 444,Stereo Audio 2.0 r edid in data! Get the EDID data of the hdmi r edid in data! input EDID data : 00 FF FF FF FF FF FF 00 ...... -10- 8. Application Example The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. -11- Follow us DVDO +1.408.213.6680 su-1pp2o-rt@dvdo.com www.dvdo.com