Mobicool Thermoelectric Coolers

Introduction

This document serves as the operating and safety manual for Mobicool thermoelectric coolers. It contains vital information regarding the safe and correct use, as well as disposal of the appliance. Familiarize yourself thoroughly with all instructions before operating the cooler.

Product Models Covered

This manual provides guidance for the following Mobicool thermoelectric cooler models:

• MT08
• MT26/30 (TC16)
• MT35
• MT35W
• MT38W (TC16)
• MT48W
• MQ40W
• MQ40A
• MV26/30 (TC36)
• MM24DC/MM24
• E24 / E24M

General Safety Warnings

WARNING! Failure to adhere to these warnings may result in serious injury or death.

• Electrocution Hazard: Do not operate if the device shows visible damage. Damaged power cords must be replaced by the manufacturer or qualified service personnel. Repairs should only be carried out by authorized professionals.
• Health Hazard: The appliance may be used by children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, provided they are supervised or have received instruction on safe use and understand the associated risks. Children should not play with the device. Cleaning and maintenance should be performed by adults.
• Explosion Hazard: Do not store explosive substances, such as spray cans with flammable propellants, inside the cooler.

Proper Use and General Operation

The Mobicool thermoelectric cooler is designed for cooling pre-cooled food and drinks in private households, camping, and vehicles. It is not intended for commercial use.

• The device is not suitable for continuous operation; ice may form on the cooling plate. It is recommended to switch off the unit after 6 days of continuous use and allow it to rest for 2 hours.
• Regularly clean surfaces that come into contact with food.
• Store raw meat and fish in suitable containers to prevent contamination of other food items.
• If the appliance will not be used for an extended period, switch it off, clean, dry, and leave the lid open to prevent mold.

Tips for Optimal Cooling and Energy Savings

• Place the cooler in a well-ventilated area, protected from direct sunlight.
• Only place pre-cooled items into the cooler.
• Avoid leaving the lid open for longer than necessary, as this can significantly increase the internal temperature.
• Ensure adequate air circulation by not overfilling the unit.
• For maximum energy savings, especially during prolonged 230V operation, use the "Eco" mode.

Disposal Information

Electrical appliances should not be disposed of with household waste. Please follow local regulations for the collection and recycling of electrical and electronic equipment.

Diagrams and Visual Instructions

This manual includes detailed diagrams illustrating setup, operation, and safety features for each specific model. For precise step-by-step guidance and visual references, please consult the original PDF.