Sensor & Switch Solutions for HVAC

Focus Products

The chart details various Honeywell product lines that can be used to support HVAC applications.

● Primary sensor/switch used within application (key design consideration for OEM)

● Secondary sensor/switch used within application (not a key design consideration)

Demand Control Ventilation

An efficient ventilation system responds to real-time data to optimize the recirculation of air, thereby, improving air quality and reducing HVAC running costs. Demand control ventilation allows buildings to meet the needs of growing trends which call for more environmentally friendly buildings with better indoor air quality.

Variable Air Volume Control

Controls airflow into a room or duct while sensors enable monitor valves to control the air volume to maximize energy efficiency. Sensors are critical to identifying the system is working as intended and at its best.

Air Purification & Filter Monitoring

Recent trends point to an increase in the need for air purification and filter monitoring.

Air Conditioning

An air conditioning may consist of a centralized cooling system that enables the cold air to be distributed throughout a building or a standalone unit that provides air cooling and filtration within a contained space.

Heating System: Commercial

Commercial boilers use combustion to heat water and air, which is sent through pipes or vents throughout a building to provide heat. The biggest needs for boilers are to be energy efficient and safe. Honeywell sensors provide efficiency while also detecting faults and leaks.

Heating System: Residential

Residential heating systems, heat air or water which is distributed throughout the build to provide heat. These systems need to be energy efficient, reliable and safe. Honeywell sensors are used to improve efficiency and detecting faults and leaks.

Refrigeration Systems

Refrigeration cools a space, substance or system to lower and/or maintain its temperature below the ambient one. New refrigerants improve the efficiency of the system, and require durable sensors and switches with stable temperatures and burst pressures.

Pressure Sensors and Transducers

Board Mount Pressure Sensors, Basic ABP/ABP2 Series

• Pressure range: 1 inH₂O to 175 psi
• High accuracy, TEB: 1.5%FSS
• Temp compensated: -40°C to 110°C
• Temp operating: -40°C to 110°C
• Extensive media compatibility
• Analogue & digital (I²C/SPI)
• Best for configurability & value

Board Mount Pressure Sensors, TruStability™ RSC, HSC and SSC Series

• Pressure range: 0.5 inH₂O to 150 psi
• High accuracy, TEB: 1.0%FSS
• Temp compensated: -40°C to 85°C
• Temp operating: -40°C to 85°C
• Outstanding EMI/EMC performance
• Analogue & digital (I²C/SPI)
• Best for accuracy, stability & performance

Heavy Duty Pressure Transducers, MIP Series

• Pressure range: 15 psi to 900 psi
• High accuracy, TEB: 0.75 %FSS
• Temp operating: -40°C to 125°C
• Compatible with a wide range of fluids and gases
• Rugged stainless steel 304L construction
• Outstanding EMI/EMC performance
• Best for accuracy, stability & performance

Temperature Sensors

Thermistors, 192/194 Series

• High quality, low-cost, resistance temperature-matched interchangeable units
• Dissipation constant in still air: 0,75 mW/°C
• Time constant in air: 15.0 s
• Maximum diameter: 2,413 mm [0.095 in]
• Resistance temperature curve, interchangeability, enhanced stability and life, epoxy coated

Gas Sensors

Carbon Dioxide Gas Sensor, CRIR-M1 Series

• Single channel, non-dispersive infrared (NDIR) sensor for detecting Carbon Dioxide
• Small size
• Maintenance free for normal indoor applications
• Enhanced long term stability
• Higher accuracy: ±40 ppm ±3% of reading
• Consistency and repeatability
• Auto baseline correction (ABC)

Carbon Monoxide Gas Sensor, ECOSURE X

• Cost-effective two-electrode electromechanical cell designed for the detection of carbon monoxide in domestic/residential CO detection, industrial fire detection and ventilation control
• Unique design for use in extreme environments
• Suitable for use in BS, EN, UL, LPC, VDS and TÜV accredited products
• Features an integrated active filter to eliminate false alarms caused by common household vapors

Airflow Sensors

AWM3300 Series

• Small size
• Amplified signal conditioning
• 30 SCCM to 5 mBar
• Analog output
• 50 mW typ. power consumption
• -25°C to 85°C [-13°F to 185°F] range

Hall-Effect and Magnetoresistive Sensor ICs

Linear Hall-Effect Sensor ICs, SS490 Series

• Small size with low power consumption
• Single current sinking or current sourcing linear output
• Built-in laser trimmed thin-film resistors allow sensitivity and temperature compensation
• Responds to either positive or negative gauss
• Quad Hall sensing element for stable output

Magnetoresistive Sensor ICs, Nanopower Series (SM351LT/SM353LT); Standard Power Series (SM-351RT/SM451R/SM353RT/SM453R)

• SOT-23 package (SM351LT/SM353LT/SM351RT/SM353RT); flat TO-92-style (SM451R/SM453R)
• Sensitivity of 7 G typ., 11 G max. (SM351LT//SM-351RT/SM451R); 14 G typ., 20 G max. (SM353LT/SM353RT/SM453R)
• Omnipolar sensing activates with either pole from a magnet

High Sensitivity Latching Hall Sensors (SS360ST/NT/PT and SS460S for BLDC commutation)

• Fastest response time in its class
• No chopper stabilization
• High sensitivity; operates from only 30 gauss typ.
• Bipolar latching magnetics
• Can be supplied on tape-and-reel

MICRO SWITCH Basic Switches

MICRO SWITCH Large Basic Switches, IBZ and WA Series; DT Series

• Accepted world-wide standard "Large Basic" switch
• Low operating force and differential travel
• Long mechanical life up to 20,000,000 cycles at 95% survival
• Current rating ranges from 15 A to 25 A
• Choice of actuation, termination and operating characteristics
• Two independent single-pole double throw circuits in one housing and actuator (DT)

MICRO SWITCH V-Basic Miniature Switches, V19 Series

• RoHS/REACH/Cal Prop65 compliant
• UL/CSA, cUL, ENEC, CQC certifications enable global design acceptance and cost savings in agency approvals
• 5 A, 16 A: electrical ratings for design flexibility in one industry standard package
• > 1M mechanical operations

MICRO SWITCH V-Basic Miniature Switches, V15 Series

• Designed from 10K to 50K operations at a full load or 5M for mechanical life
• World-wide package size acceptance
• Current rating ranges of 10 A and 26 A
• UL/CSA, cUL, UKCA, ENEC, and CQC approvals

MICRO SWITCH Explosion-Proof Basic Switches, V15W2 Series

• Approved for use in Zone 2 hazardous locations
• IP67 equivalent
• UL, CUL, UKCA, ENEC, CQC, ATEX, IEC Ex approvals
• 5 A electrical rating
• Longer service life: over one million mechanical operations

MICRO SWITCH Subminiature Switches, ZM/ZW/ZX Series

• Best suited for lower cost-of-failure applications
• Small, lightweight, low cost, enhanced life, ample electrical capability
• Choice of low energy or power-duty electrical ratings (gold-plated or silver contacts)
• Choice or ratings, actuation, termination and operating characteristics
• UL/CSA, CUL, ENEC, and CE approvals

MICRO SWITCH Toggle Switches

MICRO SWITCH Toggle Switches, NT Series

• ISA 12.12.01 certified; designed for use near flammable hydrocarbon refrigerants
• Quick-connect spade terminals
• UL191 electrical rating
• Sealed to NEMA 3, 3R, 4, 13, and IP67
• Operating temperature range: -40 °C to 71 °C [-40 °F to 160 °F]

MICRO SWITCH Pushbutton Switches

Operator Interface Switches and Indicators, AML Series

• Pushbuttons, paddles, rockers, key-actuated, and indicators within AML Series for coordinated panel appearance
• Less than 1.75 inch panel depth
• Two or three positions and maintained or momentary action
• One-, two-, or four-poles with double throw available for most switches

Pressure Switches

Extended Duty Pressure Switches, 5000 Series

• Specifically designed to stand up to extended duty applications
• Factory set but capable of field adjustment
• Direct action blade contact
• Burst pressure: : 750 psi for 0.5 psi to 24 psi set point range; 1250 psi for 25 psi to 150 psi set point range

Warranty/Remedy

Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgment or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items that Honeywell, in its sole discretion, finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.

While Honeywell may provide information or engineering support for its products through Honeywell personnel, literature and website, it is the buyer's sole responsibility to determine the suitability of the Honeywell product(s) for the buyer's requirements.

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this writing. However, Honeywell assumes no responsibility for its use.

FOR MORE INFORMATION

Honeywell Sensing Solutions services its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing, or the nearest Authorized Distributor, visit automation.honeywell.com/hss or call:

• USA/Canada: +302 613 4491
• Latin America: +1 305 805 8188
• Europe: +44 1344 238258
• Japan: +81 (0) 3-6730-7152
• Singapore: +65 6355 2828
• Greater China: +86 4006396841

Honeywell Sensing Solutions
830 East Arapaho Road
Richardson, TX 75081
www.honeywell.com