Yale Approach Lock: Let's Get Started

This guide provides instructions to set up your Yale Approach Lock and Yale Connect Wi-Fi Bridge. The document includes steps for downloading the Yale Access app, scanning QR codes for device setup, and important safety and compliance information.

Visual: An image displays the Yale smart lock and the Yale Connect Wi-Fi Bridge.

Setup Steps

Step 1: Download the Yale Access App

Download the Yale Access app and create an account, or sign in to your existing Yale Access account. Links are provided for the [Apple App Store] and [Google Play Store].

Step 2: Scan the Lock QR Code

From the app menu, select "Set Up Device", then scan the lock's QR code when prompted. Visual: An image of the Yale smart lock is shown alongside a QR code labeled "LGIES 00052 Yale".

Step 3: Scan the Bridge QR Code

During setup, you will be guided through setting up your Yale Connect Wi-Fi Bridge. Scan the bridge's QR code when prompted. Visual: An image of the Yale Connect Wi-Fi Bridge is shown alongside a QR code labeled "C8WEG 001AG Yale".

Additional Resources & Support

Yale is committed to ensuring a smooth setup experience. For more information about your new smart device, visit support.shopyalehome.com.

Contact Support: Available 24/7 at 1-855-213-5841 or via email at support@yalelock.com.

Terms & Conditions can be consulted at support.shopyalehome.com.

Product Information: QSG P/N 090-01045

Copyright ©2024 Master Lock Company LLC

Product Information & Compliance

Product: Yale Approach Lock

Model: ASL-08

FCC ID: 2AB6U-ASL08

IC ID: 12163A-ASL08

FCC & Industry Canada Compliance

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

FCC & IC Radiation Exposure Statement

This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Battery Safety Warnings

Replacement of a battery with an incorrect type can defeat the safeguard. Do not dispose of a battery into fire or a hot oven, or mechanically crush or cut the battery, as this can result in an explosion.

Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.

Do not expose the battery to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.