Contact Us â Official VEVOR Support
Instruction Manual for VEVOR models including: SX-81509 Kids Recliners, SX-81509, Kids Recliners, Recliners
File Info : application/pdf, 8 Pages, 1.66MB
DocumentDocumentWARNING Adult assembly KIDS' RECLINERS MODEL:SX-81509 Technical Support and E-Warranty Certificate www.vevor.com/support MODEL:SX-81509 KIDS' RECLINERS This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product. Warning-To reduce the risk of injury, user must read instructions manual carefully. Note: Adult assembly required ! Compliance is a CE security certification. Ages Over 3 years old SAFETY INSTRUCTIONS WARNING: Read this material before using this product. Failure to do so may result in serious injury. Assembly precautions 1. Assemble only according to these instructions. Improper assembly may create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 3. Keep the assembly area clean and well-lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble if tired or when under the influence of alcohol, drugs or medication. 6. The product capabilities apply to properly and completely assembled products only. 7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the Kids' Recliners. 8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area. Use precautions 1. DO NOT SIT OR STAND ON THIS ITEM. 2. This product is not a toy. Do not allow children to play with or near this item. 3. Do not exceed specified weight capacities. 4. Use only on a flat, level, hard, and smooth surface that can safely support a fully loaded Kids' Recliners. 5. Use as intended only. 6. Inspect before every use; do not use if parts are loose or damaged. SAVE THIS MANUAL PARTS LIST STEP1 ASSEMBLY STEP To avoid damage to the backrest cushion from the metal frame during removal, please carefully remove it in the correct direction as indicated in the illustration. STEP2 ASSEMBLY STEP STEP3 Assemble the backrest upholstery cover with the back frame. STEP4 Attach the Nylon Fastener to the back frame. STEP5 STEP6 Fixed Completion State Note: The position of the foot support of the chair can not be stressed, and it will be closed under stress. PRODUCT PARAMETER Model Safe Loading Weight Product Size SX-81509 90LBS 565*515*655mm(90°) 565*865*585mm(Put Down) Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 UK EC REP REP YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. Technical Support and E-Warranty Certificate www.vevor.com/support