ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

Scada-Mate® SD Switching System

An Overview of Advanced Distribution Automation

Purpose and Application

The Scada-Mate® SD Switching System by S&C Electric Company is engineered for the automation of overhead distribution systems. It provides robust solutions for both remote supervisory control and automatic source transfer, ensuring reliable power delivery.

Key Features

Available for 14.4 kV and 25 kV voltage ratings.
Designed for three-pole, group-operated interrupter switch applications.
Features integrated stored-energy operating mechanisms for electrical and manual operation.
Offers various control units, including externally powered and self-powered options, and advanced models like the 6801 and 6802 Automatic Switch Controls.
Supports IntelliTeam® SG Automatic Restoration System for intelligent grid management.

System Benefits

This system enhances grid reliability by enabling automated fault isolation, sectionalization, and rapid source transfer. Its modular design and comprehensive service packages facilitate tailored solutions for utility needs.

Models: Scada Mate SD Switches System, SD Switches System, Switches System, System

File Info : application/pdf, 18 Pages, 1.40MB

JavaScript is disabled. Open the PDF or Download.

Specification Bulletin 775-31 Adobe PDF Library 17.0 Adobe InDesign 20.0 (Macintosh)

Related Documents

	S&C 6802 & 6803 Automatic Switch Controls: Specifications and Ordering Guide Detailed specifications and ordering information for S&C Electric Company's 6802 and 6803 Automatic Switch Controls. Learn about features like IntelliTeam SG, RTU functionality, data logging, and communication capabilities for advanced distribution automation.
	IntelliTeam SG Automatic Restoration System: Available Source Capacity Calculation and Configuration Guide Detailed guide on configuring S&C Electric's IntelliTeam SG and IntelliTeam II Automatic Restoration Systems for calculating available source capacity, including safety information, configuration steps, and practical examples for electrical distribution systems.
	S&C 6801M Automatic Switch Operators: Specifications and Features Detailed specifications for the S&C 6801M Automatic Switch Operators, including features, options, ordering information, and technical details for automating overhead distribution switches.
	S&C Scada-Mate Switching Systems Switch Control Installation and Operation Instructions Comprehensive instructions for the installation, connection, and operation of the S&C Scada-Mate® Switching Systems Switch Control unit. This document covers checking shipments, wiring procedures, operational modes, and sensor calibration, referencing S&C Instruction Sheet 768-580.
	IntelliNode Interface Module: DNP Points and Implementation Guide Detailed guide to DNP points and implementation for the S&C Electric Company IntelliNode Interface Module, used with IntelliTeam SG Automatic Restoration Systems. Covers status, analog output, control, and counter points.
	S&C Source-Transfer PMH Pad-Mounted Gear: Specifications for 14.4 kV and 25 kV Outdoor Distribution Detailed specifications for S&C Source-Transfer PMH Pad-Mounted Gear, featuring Micro-AT® Control for automatic primary-selective service and fault protection on 14.4 kV and 25 kV distribution systems. Includes technical data, features, and ordering information.
	S&C EnergyLine 5800 Series Automatic Switch Control Communication Instructions This document provides comprehensive communication instructions for the S&C EnergyLine 5800 Series Automatic Switch Control with IntelliTEAM Automatic Restoration System. It covers the installation and use of the RadioShop software, configuration of UtiliNet radios, testing communication, loading address information, and updating the device control word (DCW).
	S&C Electric: Ameren Missouri Automates Underground System for Improved Reliability Case study detailing how Ameren Missouri modernized its underground electrical system with S&C's PME Pad-Mounted Switchgear and IntelliTeam® II Automatic Restoration System, significantly reducing outages and restoration times.