ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

National Instruments NI 4070/4072 FlexDMM Calibration Procedure

This document provides comprehensive, step-by-step instructions for calibrating the National Instruments NI 4070 and NI 4072 6½-Digit FlexDMM digital multimeters. It details the procedures for verifying device performance and adjusting calibration constants across various measurement modes.

Key Features Covered:

Detailed calibration steps for DC Voltage, AC Voltage, Resistance (2-wire and 4-wire), DC Current, AC Current, Frequency, Capacitance, and Inductance.
Guidance on required test equipment, setup, and environmental conditions.
Information on verification limits and adjustment procedures.
References to essential documentation and support resources from National Instruments.

This guide is essential for ensuring the accuracy and optimal performance of NI 4070/4072 devices. For more information, visit the National Instruments website.

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 69 Pages, 1.78MB

ni-4070-4072-6½-digit-flexdmm-calibration-procedure GPL Ghostscript 9.55.0

Related Documents

	NI 9260 Calibration Procedure Detailed guide for the verification and adjustment procedures of the National Instruments NI 9260 2-Channel, 3 Vrms, 24-Bit Analog Output Module, covering software setup, test equipment, conditions, initial setup, accuracy verification, and adjustment steps.
	NI Calibration Executive: Automated Calibration Software for Measurement Hardware National Instruments Calibration Executive software automates the verification and adjustment of NI measurement hardware. This document outlines supported products, system requirements, and additional resources for using the software.
	National Instruments RF Signal Generators and Power Meters Overview A comprehensive overview of National Instruments' RF and microwave signal generators (NI PXI-5671, NI PXIe-5672, NI PXIe-5673, NI PXI-565x series) and RF power meter (NI USB-5680), detailing their key specifications, modulation capabilities, hardware architecture, software compatibility, and ordering information for various RF test and measurement applications.
	NI 9775 Calibration Procedure: Verification and Adjustment Guide This document provides a detailed calibration procedure for the National Instruments NI 9775 C Series Digitizer Module, outlining verification steps, required test equipment, software setup, and adjustment processes for both AC and DC accuracy.
	NI PXI-6683 Series User Manual: Timing and Synchronization Modules User manual for National Instruments PXI-6683 and PXI-6683H timing and synchronization modules. Covers GPS, IEEE 1588, IRIG-B, PPS synchronization, hardware, installation, and specifications for PXI systems.
	National Instruments Serial Installation Guide - PXI, USB, ENET, ExpressCard Detailed installation guide for National Instruments NI-Serial software and hardware interfaces, including PCI, PCI Express, PXI, USB, ENET, and ExpressCard. Learn how to set up, configure, and troubleshoot your serial ports. Also covers Apex Waves' services for NI hardware.
	National Instruments NI 66xx SCB-68A Pinout Labels and Connection Guide Comprehensive pinout labels and connection reference for National Instruments NI 66xx counter/timer devices (NI 6601, 6602, 6608, 6612, 6614) when used with the SCB-68A shielded connector block. Includes detailed pin assignments for each model.
	National Instruments PXIe-4304/4305 and RM-4304 User Guide and Specifications Comprehensive user guide for National Instruments PXIe-4304/4305 filtered analog input modules and the RM-4304 rack-mount terminal block. Covers installation, configuration, software setup, hardware connections, calibration, troubleshooting, and detailed specifications.