LIORQUE Projection Alarm Clock User Manual

Diagram and Features

This section details the physical components and features of the LIORQUE Projection Alarm Clock.

Front View

The front of the clock features two distinct display areas, each showing:

• Time: Displayed prominently (e.g., 9:38).
• AM/PM Indicator: For 12-hour format.
• Day of the Week: e.g., TUE.
• Date: e.g., 23.9 (likely month and day).
• Status Indicators: WEEKEND, DST (Daylight Saving Time), FM, AUTO.
• Alarm Time: Displayed separately (e.g., 9:30).
• Alarm Clock Icon: ⏰.
• FM Radio Sleep Timer Icon: Indicates sleep timer is active.

Key labels on the front diagram include: 1. Time, 2. AM / PM (12-hour format), 3. Weekend mode, 4. Daylight saving time, 5. FM, 6. Auto mode, 7. Month, 8. Day, 9. Day of the week, 10. Temperature, 11. Alarm clock icon, 12. AM / PM (12-hour format) alarm time, 13. Alarm time, 14. FM radio sleep timer icon / radio station storage.

Top View (Buttons)

The top surface houses various control buttons:

• TIMER
• 12/24: For display format conversion.
• ON/OFF: For alarm control.
• WEEKEND: For weekend mode.
• FM: For FM radio.
• SLEEP: For sleep timer.
• MEM: For memory/station saving.
• °C/°F: For temperature unit selection.
• -: Decrease value.
• +: Increase value.
• ◀◀: Previous track/station or decrease.
• ▶▶: Next track/station or increase.
• SNOOZE/LIGHT: For snooze function and display light control.

Key labels on the top diagram include: 1-5 for buttons, 6-7 for controls, 8-10 for buttons, 11-12 for buttons.

Back View

The back panel contains ventilation slots and ports. Labels include: 13. Speaker ?, 14. USB charging port ?, 15. Micro USB port ?.

Bottom View

The bottom panel includes ports. Labels include: 16. Battery compartment ?, 17. Antenna ?.

Right View

The right side features the projection lens ? and a focusing knob ⚙️. Labels include: 18. Projection focusing knob.

Getting Started

Power On

Connect the USB cable to the product and adapter, then plug the adapter into a power outlet.

Time Setting

1. In time display mode, long press the 12/24 button to enter time setting.
2. Use the + or - buttons to increase or decrease the digit.
3. Long press + or - to quickly set the minute and hour.
4. After setting, short press the 12/24 button to confirm and return to time display.

12-Hour and 24-Hour Display Conversion:

In time display mode, short press the 12/24 button to switch between 12-hour and 24-hour formats.

? Note: In 12-hour format, "AM" indicates the forenoon, and "PM" indicates the afternoon.

Alarm Setting and Choice of Alarm Ringtones

1. In time display mode, long press the ON/OFF button to enter the alarm setting.
2. Use + or - to increase or decrease the minute. Long press + or - to quickly set the minute and hour.
3. Short press ◀◀ or ▶▶ to choose ringtones. "bu" is the normal alarm sound, and "rd" is the radio as the ringtone.
4. After setting, short press the ON/OFF button to confirm the setting and return to time display.
5. In time display mode, short press the ON/OFF button to turn the alarm on or off.

Turning Off Alarm: When the alarm rings, press any button other than SNOOZE/LIGHT to turn off the alarm.

Snooze Setting

1. When the alarm rings, short press SNOOZE/LIGHT to turn off the alarm briefly. It will alarm again after 9 minutes.
2. During snooze, press any button other than SNOOZE/LIGHT to turn off the snooze function completely.

Date Setting

1. In time display mode, long press the WEEKEND button to enter the date setting.
2. Use + or - to set the Year. (Long press for quick setting).
3. Short press the WEEKEND button again to set the date. The month will change with the date.
4. After setting, short press the WEEKEND button to confirm and quit date setting.
5. In time display mode, short press the WEEKEND button to turn weekend mode on or off.

Listen to the Radio

1. In time display mode, short press the FM MEM button to turn on the radio. The display shows the radio channel.
2. Short press ◀◀ or ▶▶ to search for stations step-by-step. Long press ◀◀ or ▶▶ to quickly search for stations and tune to the current station.
3. Short press + or - to adjust the volume from L00 (minimum) to L15 (maximum). The default volume is L06.
4. Short press SNOOZE/LIGHT to turn off the radio.

Save the Station

In Radio Mode, long press the FM MEM button until "MEM" and "01" appear on the display. Then press the FM MEM button to save the radio station. Stations are saved sequentially from "01" up to 15.

Tune to Saved Stations

1. In radio mode, short press the FM MEM button. The "01" indicator will appear, allowing you to tune to the saved station.
2. Short press the FM MEM button again to switch through the saved stations. Unsaved stations will not display a station number.

Radio Timing (Sleep Timer)

In radio mode, short press the SLEEP °C/°F button to enter sleep setting mode. "SLE" and the selected time (e.g., "05") will show on the display. Short press the SLEEP °C/°F button to choose the sleep time: 5→15→30→45→60→75→90→OFF.

? Note: In sleep mode, "SLE" is always displayed at the position where the day of the week is normally shown.

Projection Setting

1. In time display mode, short press the projector icon ? to turn on the projector. Turn the focusing knob ⚙️ until the time is clearly projected on the wall.
2. In projection mode, short press the projector icon ? to adjust brightness. Long press the projector icon ? to flip the projection image 180 degrees.
3. In projection mode, the projection can be rotated 90 degrees forward or backward.

Display Brightness Adjustment

In time display mode, short press the SNOOZE/LIGHT button to adjust the brightness of the display. The levels are: Low light → Medium light → High light → Off (4-level).

Display Color Conversion

In time display mode, long press the SNOOZE/LIGHT button to switch the display color between blue and white.

Temperature Unit Conversion

In time display mode, short press the SLEEP °C/°F button to switch between Celsius (°C) and Fahrenheit (°F).

Daylight Saving Time Setting

In time display mode, long press the + button to turn daylight saving time mode on or off. When DST is on, "DST" shows on the screen, and the time will automatically increase by 1 hour.

Automatic Mode Setting

In time display mode, long press the - button to turn automatic mode on or off. The automatic mode is activated when "AUTO" shows on the screen. In this mode, the display turns to the highest brightness, and the projection turns off automatically after the alarm finishes.

USB Charging Function

1. Connect the USB port of this product with a USB cable to charge a mobile phone and other devices.
2. Please use the original USB cable of the mobile phone and other devices for charging.
3. Please power the product with the original adapter supplied.

Note: Output voltage: DC5V, current: 1.2A (MAX).

Package Contents

• 1 * Projection Clock
• 1 * Micro USB Cable
• 1 * Adapter
• 1 * User Manual

Specifications

• Backup Battery: 1 * CR2032
• Housing Material: ABS
• Adapter Input: AC100-240V, 50 / 60Hz

Precautions

1. Please do not place the projection clock in environments with high temperature, humidity, or under direct sunlight.
2. When placing the projection clock on furniture, use a cloth or other protective materials to separate it from the furniture surface.
3. Clean the clock with a lint-free cloth dampened with soapy water if necessary. Ensure the product is disconnected from power before cleaning.
4. Only use the included adapter.
5. If the product is not used for a long time, remove the backup battery to prevent corrosion. If the battery compartment is corroded or dirty, clean it and replace the battery.
6. Please do not disassemble the product or touch any components and parts.

FCC Statement

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.