Assembly Instruction
Parts List
| No. | Picture | Size | QTY | No. | Picture | Size | QTY |
|---|---|---|---|---|---|---|---|
| A | [Screw] | M6*10 | 8 | J | [Bracket] | 20*20 | 4 |
| B | [Screw] | M6*30 | 36 | K | [Screw] | M6 | 8 |
| C | [Screw] | M6*40 | 16 | L | [Screw] | M8 | 8 |
| D | [Screw] | ST7*40 | 8 | N | [Screw] | X1 ST3.5*14 | 8 |
| E | [Screw] | ST5*50 | 4 | M | [Screw] | X2 | 1 |
| F | [Screw] | M6*40 | 8 | O | [Screw] | X2 | 1 |
| G | [Screw] | X1 ST3*14 | 4 | ||||
| H | [Screw] | M6 | 4 | ||||
| I | [Screw] | X2 X1 M4*18 | 4 |
Parts Identification
The following diagrams illustrate the individual parts and their quantities:
- Part 1: [Shelf component] x3
- Part 2: [Shelf component] x1
- Part 3: [Shelf component] x1
- Part 4: [Side panel component] x2
- Part 5: [Side panel component] x1
- Part 6: [Side panel component] x1
- Part 7: [Side panel component] x1
- Part 8: [Side panel component] x1
- Part 9: [Side panel component] x1
- Part 10: [Shelf component] x1
- Part 11: [Shelf component] x1
- Part 12: [Vertical support] x2
- Part 13: [Horizontal support] x2
- Part 14: [Curved top support] x2
- Part 15: [Curved top support] x2
- Part 16: [Curved top support] x2
- Part 17: [Curved top support] x2
- Part 18: [Curved top support] x2
Assembly Steps
Step 1
Attach the vertical supports (12) to the base components. Use M8 screws (L) for this step. Ensure 4 screws are used per support.
Step 2
Important: Pay attention to the orientation of the holes on the side panels. Attach the side panels (12, 13) to the base assembly. Use M6*30 screws (B) for this, 2 per connection point. Also use ST5*50 screws (E), 2 per connection point.
Step 3
Connect the side panels using the shelf components (1, 7). Use M6*30 screws (B) and ST7*40 screws (D) as indicated.
Step 4
Insert the shelf components (6) into the assembled frame. Ensure proper alignment before securing.
Step 5
Divide accessory G into two. Attach the shelf components (2) using F screws (2x) and G screws (2x). Then, attach the shelf components (2) again using F screws (2x) and G screws (2x). Be careful to put the No. 2 plate first to get it stuck in the correct position.
Step 6
Attach the shelf components (9, 10, 11) using the provided screws. Use ST3*14 screws (G) for part 9 (8x), M6*40 screws (F) for part 10 (4x), and M4*18 screws (I) for part 11 (8x). Also use M6 screws (K) for part 11 (4x).
Step 7
Important: Pay attention to connect the cabinet door and No. 2 board first, and then tighten the F screw. Attach the cabinet doors using A screws (8x) and F screws (4x).
Step 8
The J fitting used to connect the pipe requires the help of a tool. Align the hole and knock it down. Attach the curved top supports (17) using A screws (8x) and C screws (4x). Attach the curved top supports (16) using C screws (8x) and D screws (4x).
Step 9
Continue attaching the curved top supports (14, 15, 18) using C screws (4x) and H screws (4x).
Step 10
Attach the remaining curved top supports (14, 15) using C screws (8x) and H screws (4x).
Step 11
Secure the entire structure by using M6*30 screws (B) for all remaining connection points (24x).
Step 12
Attach the final shelf components (3) using ST3.5*14 screws (N) (4x).
Step 13
Attach the cabinet door handles using M screws (M) (2x).
Step 14
Secure the assembled bookshelf to the wall using the provided bracket and screws (2x).