Femitu 12FT Light Bulb Changer Instructions

I. The Product Includes:

• 10 * Assemble the pole
• 1 * Large 8-Finger Cage
• 1 * Small 8-Finger Cage
• 1 * Instructions

II. Product Usage Instructions:

Step 1: Assemble The Pole

• Just tighten the rod and assemble to the required length.

A rod with a universal threaded head needs to be placed at the top to connect the bulb accessory.

Step 2: Assemble The Accessories

• Select the required accessories for installation.
• After installing the accessories, the screws attached to the accessories must be tightened for reinforcement.

III. Precautions for Using the 8-Finger Cage:

Please determine the size of the light bulb and choose the appropriate 8-finger cage. The following is the range of bulb diameter sizes (at the widest point of the bulb) that each 8-finger cage is compatible with.

IV. Precautions for Using Suction Cups:

• It is necessary to ensure that the surface of the light bulb and suction cup is dry and free of dust, and to ensure the maximum suction force of the suction cup.
• The surface of the compatible bulb head must be flat and the bulb size must be larger than the suction cup diameter: 6.2CM.

Correct VS Incorrect Examples:

V: Adaptation Type And Correct Usage Example:

This section visually demonstrates correct bulb types and usage with the suction cup. It shows various bulb shapes that are compatible, including standard incandescent bulbs and some reflector bulbs, all with flat bases suitable for suction.

X: Examples Of Incompatible Types And Incorrect Usage:

This section visually demonstrates incompatible bulb types and incorrect usage. It shows bulbs with non-flat bases, bulbs that are too small for the suction cup, and examples where the suction cup is not properly attached or sealed.