NEMO FOX LED Terra Assembly Instructions
Brand: NEMO
Designer: Bernhard Osann
Model Code: 072FOX000100
Date: 12/02/2021
Box Contents
- 1x Lamp Base
- 1x Lamp Pole (multiple sections)
- 1x Lamp Head
- 1x Power Cable
- 1x Hardware Pack (screws, fasteners)
- 1x Allen Key
- 1x User Manual
Installation Guide
Insert the components and screw them together.
Insert the cylinder into the lamp base.
Pass the power cable through the side slot.
Insert the lower tube section onto the cylindrical pin.
Ensure the connection is fully inserted.
Connect the tube sections.
Electrical Connection: BE CAREFUL.
Select the appropriate power plug for your region.
Connect the power cable.
Connect the power cable.
Press the control to switch the lamp on/off. Keep pressed to adjust brightness (dim).
Accessory: Honeycomb
Place the honeycomb accessory onto the lamp head.
Unscrew any existing component if necessary.
Place the lens.
Screw the component back into place to secure the lens/honeycomb.
Spare Parts
- 1x LED Module
- 1x Diffuser Lens
- 1x Power Supply Unit
- 1x Cable Clip
- 1x Screw Pack
Movements and Dimensions
| Description | Value |
|---|---|
| Total Movement Range 1 | 90° (35° + 55°) |
| Dimensions | 225mm, 190mm (with ±3mm tolerance) |
| Total Movement Range 2 | 40° (20° + 20°) |
Important Warnings and Notes
- Symbols and guarantee information are detailed in the enclosed sheet.
- Disconnect power before performing any installation or maintenance.
- If the [IP-symbol] symbol is absent, the fixture is for indoor use only.
- Use only bulbs of the specified type and wattage as indicated on the label.
- Safety is guaranteed only if installation is carried out by a qualified electrician.
- Products with anodized finishes may exhibit color variations due to the galvanic process; these are considered aesthetic elements.
- Brushed finishes are hand-made; color variations are typical of the manual polishing process.
- Products manufactured using extrusion deformation processes may have overall dimension variations within a range of ±1cm.
- Blown glass components are artisanal products and may have variations in thickness, color, and finish, which contribute to their uniqueness.
- Unless expressly stated, avoid exposing the product to environments containing chlorine, salt air, or other aggressive agents.
- The color temperature (CCT) of LED sources may differ from the declared nominal value by ±5%.
- NEMO reserves the right to make technical or formal modifications without prior notice, particularly concerning LED sources.
- Keep these instructions for future reference.
Technical Specifications
Lamping: LED, 15W, 839 lm, 110-240V, 2700K, 50/60Hz, dimmable (on board).
This luminaire contains built-in LED lamps. The lamps cannot be changed.
Cleaning Instructions
To clean the luminaire, use only a soft cloth. Do not use alcohol or solvents.
WEEE Compliance Information
This lighting fixture is manufactured in compliance with EU Directive 2002/96/EC. The [crossed-out-bin] symbol on the appliance indicates that the product was placed on the market after August 13, 2005, and must be disposed of separately from household waste. Separate disposal prevents negative consequences for the environment and health from inadequate disposal and allows for material recovery, saving energy and resources. The end user is responsible for delivering the appliance at the end of its life to appropriate collection facilities. Non-compliance is subject to national sanctions. For detailed information on collection systems and methods, please contact your local waste disposal service, the relevant office in your city, or the retailer where the product was purchased.
