AQFORM High Multitrack Up & Down Suspended System

Product Overview

This document provides instructions for the installation of the AQFORM High Multitrack Up & Down suspended system. It includes details on required components, assembly steps, and electrical connections.

Required Components and Dimensions

Power Supply Dimensions:

Suspension Kit Components:

• Suspension kit
• Screw M2,9x9,5
• End cap
• Power supply

Maximum Drill Hole Diameter: Ø 9mm

Maximum Screw Depth: 7.5mm

Installation Steps

Step 1: Preparing the Track

1a: Attach the suspension bracket to the track. Ensure the bracket is aligned with the pre-drilled holes. The maximum drill hole diameter is 9mm.

1b: Insert the end cap into the track.

Step 2: Connecting the Power Supply

Connect the power supply to the track system. The diagram shows a 2x connection.

Step 3: Attaching Suspension Cables

Attach the suspension cables to the track system using the provided screws. The diagram shows the connection points for the suspension cables.

Step 4: Finalizing Suspension

Secure the suspension cables to the ceiling or mounting structure.

Step 5: Mounting the Track

Mount the track system to the prepared suspension points. Ensure the track is level.

Step 6: Electrical Connections

6a: Connect the electrical wiring to the track. Follow the indicated connections (I, II, III).

6b: Complete the electrical connections. Ensure proper wiring for power and control (e.g., DALI). The diagram shows connections (I, II, III, IV, V).

Step 7: Connecting 48V DC Power

Connect the 48V DC power supply to the track system. The diagram illustrates the connection points (I, II).

Step 8: Final Check

Ensure all connections are secure and the system is ready for operation. The diagram shows an 'ON' indicator.

Contact Information

AQFORM Inc. sp. z o.o.

ul. Przemysłowa 12-14 | 32-070 Czernichów | Poland

Phone: +48 12 270 21 22

Email: info@aqform.com

Website: www.aqform.com