User Guide for VIVO models including: V101G1WU Single Monitor Desk Mount, V101G1WU, Single Monitor Desk Mount, Monitor Desk Mount, Desk Mount, Mount

Adjusting Monitor Height

Pneumatic Arm Single Ultrawide Monitor Desk Mount - Up to 49" Screens – VIVO - desk solutions, screen mounting, and more

User guide (PDF)

VIVO Premium Aluminum Heavy Duty Monitor Arm for Ultrawide Screens up to 49 inches and 33 lbs, Single Wall Mount, Pneumatic Height, Max VESA 100x100, Black, STAND-V101G1 : Amazon.ca: Office Products

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 81.81KB

Document Document

REVIEW THIS GUIDE
BEFORE ATTEMPTING TO ADJUST PNEUMATIC ARM
Adjusting Pneumatic Tension to Support Your Monitor

Getting Started

1 Mount Your Monitor Follow assembly manual instructions.

2

Insert Allen Wrench Into Adjustment Screw

Adjustment screw is located on the back of

the monitor arm. Refer to assembly manual

for correct Allen wrench selection.

3 Turn 10-20x to
Counterbalance Weight
Use the guide below to adjust the tension according to the amount of counterbalance needed for the arm to support the monitor.

Tension Adjustment Guide

Clockwise: Decrease Support
[if monitor will not lower]

Counter-Clockwise Increase Support
[if monitor will not raise]

Turn the adjustment screw clockwise to decrease the support for your monitor,
allowing it to be lowered.
02/01/24 - REV 1

Turn the adjustment screw counter-clockwise to increase the support for your monitor, allowing it to be raised up.
STAND-V101G1/W/U