Downloads - Manuals
Instruction Manual for CORlly models including: C-00275-R, C-00275-R Kagama XP 6S Limited Edition Truck RTR, Kagama XP 6S Limited Edition Truck RTR, Limited Edition Truck RTR, Edition Truck RTR, Truck RTR
CORALLY KAGAMA XP 6S LIMITED EDITION TRUCK RTR - RED #C-00275-R
CORALLY KAGAMA XP 6S LIMITED EDITION TRUCK RTR - BLUE #C-00275-B
File Info : application/pdf, 16 Pages, 1.73MB
DocumentDocumentADVANCED FHSS 2.4GHZ RADIO CONTROL SYSTEM Version : 2024-12-10 Download the other languages here. Téléchargez ici les autres langues. Download de andere talen hier. Hier können Sie die anderen Sprachen herunterladen. https://corally.com/en/customer-service/downloads-manuals INSTRUCTION MANUAL WARNING and SAFETY PRECAUTION The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product. CAUTION: Procedures, which if not be properly followed, is able to create a possibility of physical property damage AND or possibility of injury. ATTENTION: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Fail to operate the product correctly can result in damage to the product, personal property and cause serious injury. ATTENTION: This is a sophisticated hobby product and NOT a toy. It must be operated with caution and common sense and requires some basic mechanical ability. Fail to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not attempt to disassemble, use with incompatible components or augment product in any way without the approval of Corally. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury. SPECIFICATIONS · 3CH Transmitter with 3-channel receiver. · The device has an integrated 2.4GHz antenna. · Steering DUAL RATE (D/R). · Steering and throttle Trims. · Steering and throttle Reverse · Model Name · E.P.A (End Point Adjustment) · EXP (Exponentiel) · ABS (Auto Brake System) TRANSMITTER Model Type: . . . . . . . . . . . . . . . . . . .Car/Boat RF power: . . . . . . . . . . . . . . . . . . . . <100mW Modulation: . . . . . . . . . . . . . . . . . . . . . . FHSS System type: . . . . . . . . . . . . . . . . . . . . AFHDS Sensitivity: . . . . . . . . . . . . . . . . . . . . . . 1024 Low Voltage Warning: . . . . . . . . . . . . . .<4,0V Power: . . . . . . . . . . . . . . . 6 VDC (1.5V AA x4) Range: . . . . . . . . . . . . . . . . . . . . . . . . 400m Size: . . . . . . . . . . . . . . . 154 x 127 x 270 mm Weight: . . . . . . . . . . . . . . . . . . . . . . . . . 395 g Certificate: . . . . . . . . . . . . . . . CE0678 - FCC RECEIVER Channels: . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Model type: . . . . . . . . . . . . . . . . . . . . car/boat Frequency band: . . . . . . . . . . . . . . . . 2.4 GHz Modulation: . . . . . . . . . . . . . . . . . . . . . . FHSS Sensitivit y: . . . . . . . . . . . . . . . . . . . . . . 1024 RF receiver sensitivity: . . . . . . . . . .-105 dbm Failsafe . . . . . . . . . . . . . . . . . . . . . .Channel 2 Power: . . . . . . . . . . . . . . . . . . . . 4.56.5 vdc Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 g ANT length: . . . . . . . . . . . . . . . . . . . . . 26 mm Size: . . . . . . . . . . . . . . . 37.6 x 22.3 x 13 mm Certificate: . . . . . . . . . . . . . . . . .CE0678 FCC 2 TRANSMITTER Antenna (Built-in) Charging connector Use only for rechargeable batteries Steering Wheel Turn model to left or right. Throttle Trigger Control the speed of the model and movement forward and backward. Battery Tray Battery location. LCD Display RETURN Button BIND Button SET Button SELECT / ENTER Rotary Knob LED Indicator ON/OFF Switch Steering Dual Rate (D/R) Adjust the steering sensitivity across the entire range. CH3 Button Throttle Trim Adjusts the throttle in small increments so the model will not move at neutral. Steering Trim Adjusts the steering in small increments so the model will run straight. CH3 Trim WARNING : Do not cover/hold the built-in antenna part of the transmitter by your hand during running. Do not put any conductive plate/sticker on the antenna part. Otherwise, the operating range may become shorter. 3 BATTERY INSTALLATION / REPLACEMENT Remove the cover and insert 4 AA size batteries. Observe the polarity markings and insert accordingly. Power ON the transmitter. The battery voltage is shown on the display. POWER ON THE TRANSMITTER LED indicator POWER ON THE TRANSMITTER PRESS and HOLD the button for 1sec to turn ON the transmitter. The LED lights up solid blue ON/OFF SWITCH OPERATE YOUR MODEL Turn Left Turn Right Reverse Turn Left Forward Turn Right THROTTLE Trigger Accelerate Brake/ Reverse 1. Gently pull the throttle trigger to move your model forward. The speed is proportional, the more you pull the throttle trigger, the faster the model moves forward. 2. Release the throttle trigger in neutral position to slow down your model. Pull the throttle trigger forward to brake your model. For reverse, after stopping the model, release the throttle trigger to neutral position then pull the throttle trigger forward again to activate reverse. 4 TRANSMITTER FUNCTIONS STEERING TRIM The steering trim is used to adjust the steering setting so that the car moves in a straight line without using the steering wheel to compensate. THROTTLE TRIM The throttle trim is used to adjust the setting of the neutral position of the throttle without using the throttle/brake trigger to compensate. STEERING DUAL RATE (D/R) +/- Use this function to adjust the steering travel of your model. If the model understeers while cornering, add steering by turning CW of the D/R button. When the model oversteers, take away steering by turning CCW of the D/R button. 5 RECEIVER 5G 37.6 2 13 22.3 Fail Safe Setup Button LED indicator Bind / Link Channel 3 Channel 2 Throttle Channel 1 Steering PLEASE NOTE: The channels "BIND" and "CH3" are not switched to reach a higher transmission rate. RECEIVER CONNECTION CONNECTION WITH A ESC GAS POWERED MODEL BATTERY 4,8V - 6V BATTERY SIGNAL LED R-323 FAIL SAFE SETUP AFHDS 3-CHANNEL BIND 2.4GHZ CH-3 RECEIVER CH-2 CH-1 RECEIVER ESC SERVO SIGNAL LED R-323 FAIL SAFE SETUP AFHDS 3-CHANNEL BIND 2.4GHZ CH-3 RECEIVER CH-2 CH-1 RECEIVER THROTTLE SERVO STEERING SERVO Install the Receiver in your model using double-sided Velcro. Velcro will hold the receiver in place and protect it from vibrations. Mount the antenna up and away from the vehicle in an antenna tube. The higher up the antenna is, the better signal it will receive. Install and connect the receiver, servos and other components in accordance with the "Assembly Precautions". CAUTION: NEVER CUT THE ANTENNA 6 BINDING / LINKING THE RECEIVER AND TRANSMITTER LINK/BIND Button The transmitter and receiver are already paired at the factory and you do not have to do anything. If you wish to connect the receiver with another transmitter or connect a new receiver, or if you have a problem with the link, follow the steps below to re-pair. LINKING/BINDING PROCEDURE: 1. Install the batteries in the 2.4 GHz radio. Transmitter on OFF. 2. Connect the supplied pairing cable to the "BIND" channel of the receiver. 3. Connect the battery to the receiver on one of its VCC ports, the red LED flashes: the receiver is in pairing status. 4. Press and hold the BIND button on the transmitter and turn it ON. (about 5 seconds) 5. Observe the LED on the receiver. If the LED stops flashing, the binding process is successful. (This process takes up to 5 sec.). 6. Release the BIND button on the transmitter, remove the pairing cable from the receiver. 7. Perform a function test. 8. If the test is not successful, repeat the above steps. FAIL SAFE SETUP The "Fail Safe" mode is the ideal protection for your RC car, it prevents the loss of control of the car if there is a lack of connection between the transmitter and the receiver. This means that a position for channel 2 (Forward/Reverse) is determined, normally the NEUTRAL position is chosen for an electric car and the BRAKE position for a nitro car. FAIL SAFE PROCEDURE 1. Turn ON the transmitter 2. Power up the receiver, the LED should be lit solid. 3. Position and hold the throttle trigger in the desired position; NEUTRAL for an electric car, BRAKE for a nitro engine car. 4. Press the "FAIL SAFE SETUP" button on the receiver with the plastic pin provided. The LED will flash for 3 seconds. 5. The setting is now stored. TEST 1. Switch on the transmitter and then the receiver. 2. Switch off the transmitter. 3. The car must not move (electric car), the gas/brake servo must be in brake mode (nitro car). 4. If the test is not successful, repeat the above steps. 7 PROGRAM SETTINGS STARTUP DISPLAY ENTER button (Rotary Knob) - Turning the ENTER button changes the display. - Turning the ENTER button counterclockwise decreases the value in programming mode. - Turning the ENTER button clockwise increases the value in programming mode. - Press the ENTER button to enter the programming menu. (A) - Press the RETURN button to return to the menu. (B) - Press the SET button to confirm to the value. (C) Model number Battery voltage (A) (B) (C) LOW POWER ALARM LOW VOLTAGE The following screen is displayed when the voltage is below 4.0V. "LOW POWER" flashes and the buzzer sounds. The transmitter will automatically turn OFF when the voltage drops below 3.5V. 8 PROGRAM SETTINGS MODEL MODEL Select ( 0 - 9) - Press the ENTER button to highlight the MODEL menu. - Press and turn (left or right) the ENTER button to select the desired model number. - Press the ENTER button to confirm. Model number MODEL NAME NAME EDIT - Press and turn (left or right) the ENTER button to select the NAME EDIT menu. - Press the ENTER button to enter the menu. - The first digit blinks, turn the ENTER button to select the desired letter or number. - Press SET button to select the next digit. - Press ENTER to confirm the name. Digit Press 9 PROGRAM SETTINGS REVERSE SERVO REVERSE - Press the ENTER button to enter the SERVO REVERSE menu. - Turn (left or right) the ENTER button to select the desired channel number and press the SET button. - Turn (left or right) the ENTER button to select NOR (normal) or REV (reverse) mode. - Press the ENTER button to confirm. Select the channel NORMAL mode REVERSE mode E.P.A (STEERING) The E.P.A. or End Point Adjustment. This is particularly important when using a digital servo. An incorrectly set E.P.A. will stress the servo and it will not last long. The transmitter is originally set to 100% E.P.A. It is possible that this value is not correct and therefore the servo will try to push the servo horn further than it can. Example on the steering. Turn the steering wheel slowly and observe the wheels. If the wheels come to a stop before the end of the steering wheel travel, the E.P.A is not correct. The servo will force and you will hear it «whistle». Adjustment: Move the servo all the way in one direction to the stop and then use the E.P.A. adjustment to reduce the servo travel until it stops whistling. It is important to have the dual rate at 100% during this operation as it works like trim and sub trim. STEERING E.P.A (End Point Adjustment) - Press the ENTER button to enter the EPA menu. - Turn (left or right) the ENTER button to select the desired channel number and press the SET button. - Turn (left or right) the ENTER button to select to adjust at 0 to 120%. - Press the ENTER button to confirm. - Turn the steering wheel to access the right side setting and adjust to the desired value. - Press the ENTER button to confirm. Select the channel Select 0 > 120% Right side 10 PROGRAM SETTINGS E.P.A (THROTTLE) Use this function to make adjustments to the amount of throttle/brake. ABS Select 0 > 120% REVERSE / BRAKE Accelerate Brake/ Reverse ABS ( Autobrakesystem) This function cannot be used for a car equipped with an electronic speed control, as this could damage the ESC or make it unusable. - Press the ENTER button to enter the ABS menu. - Turn (left or right) the ENTER button to select the desired mode OFF - SLW (Slow) - FST (Fast) and press the ENTER button. NO ABS SLOW mode FAST mode EXPONENTIAL EXPONENTIAL (Steering) This function is used to change the sensitivity of the steering servo around the neutral position. - Press the ENTER button to enter the EXPONENTIAL menu. - Turn (left or right) the ENTER button to select the desired channel number and press the SET button. - Turn (left or right) the ENTER button to setup the value (-99% to 99%) - Press the ENTER button to confirm or SET button to setup the channel 2 and 3. Select the channel Select -99% to +99% 11 PROGRAM SETTINGS D/R DUAL RATE Use this function to adjust the steering travel of your model. If the model understeers or oversteers while cornering, adjust the D/R value. DUAL RATE - Press the ENTER button to enter the D/R menu. - Turn (left or right) the ENTER button to select the desired channel number and press the SET button. - Turn (left or right) the ENTER button to select to adjust at 0 to 100%. - Press the ENTER button to confirm. - Press SET button, select Channel 2, press SET button and adjust to the desired value. - Press the ENTER button to confirm. Select the channel Select 0 > 100% TRIM (Steering - Throttle) The trim is used to adjust the steering setting and throttle setting. TRIM - Press the ENTER button to enter the TRIM menu. - Turn (left or right) the ENTER button to select the desired channel number and press the SET button. - Turn (left or right) to adjust the left or right trim ( 0 to 30). - Press the ENTER button to confirm. - Press SET button, select Channel 2 (throttle), press SET button and adjust to the desired value. - Press the ENTER button to confirm. Select the channel Select 0 > 30 (N00 = Neutral) LEFT RIGHT FORWARD BRAKE/ REVERSE 12 CAUTION The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Consult the dealer. PRECAUTIONS ! Check the receiver, servos, and battery connectors, to be sure they are firmly connected. If a connector is not fully inserted, vibration may cause the connector to work loose while the model is operating. This will result in loss of control. ! Operate each servo horn over its full stroke and check to see that the linkage does not bind or is not too loose. Excessive force applied to the servo horn by binding or poor installation may lead to servo problems and result in loss of control. ! Electric Cars and Boats : Isolate the receiver from vibration by attaching to the chassis or mounting plate with thick double sided tape. Gas Powered Cars and Boats : Isolate the receiver from vibration by wrapping it in foam rubber or similar type cushioning material. Protect the unit from water damage by placing it in a plastic bag or waterproof radio box. The receiver contains precision electronic parts. These parts are vulnerable to vibration and shock. Any contact with moisture (water or condensation) may cause receiver malfunction and loss of control. ! Keep all devices that emit high frequency noise, such as motors, batteries, and wiring that handles heavy current loads, at least 1/2 inch away from the receiver and the receiver antenna. High frequency noise will cause a decrease in operating range and could cause loss of control. ! Install electronic speed control heat sinks as well as other components that conduct electricity so they can not come in contact with aluminium, carbon fibre or other materials that conduct electricity. If, for example, the speed control came loose while the model was running and touched an aluminium chassis, a short circuit may occur that would cause irreparable damage to the system as well as loss of control. ! Noise suppression capacitors should be installed on almost all motors. If the proper capacitors are not installed, high frequency noise will reduce range and cause loss of control along with various other problems. ! Inspect all linkage installations and any point where metal could come in contact with other metal parts. Make sure these parts do not touch other metal parts under vibration. Should a linkage or other metal parts come in contact with other metal parts under vibration, the high frequency noise generated by this contact will cause interference and possible loss of control. ! Do Not disassemble any part of this system that is not specified in the instruction manual. Corally will not be responsible for any damage due to improper disassembly of any part of the radio control system. 13 WARRANTY CONDITIONS & LIABILITY DISCLAIMER If material defects or manufacturing faults should arise in a product distributed or manufactured by Team Corally / JSP Group Intl bvba, and purchased by a consumer, we Team Corally / JSP Group Intl bvba acknowledge the obligation to correct those faults or defects within the limitations described below. This manufacturers warranty is in addition to, and does not affect, the legal or contractual rights of the consumer which arise from the purchase of such products. Team Corally / JSP Group Intl bvba guarantees the consumer that its products are free from material, manufacturing, and construction faults, as determined by the general state of knowledge and technology valid at the time of manufacturing. The fault responsible for causing the damage must be proven to have been present in the product at this time. Claims for compensation arising from consequential damage or product liability will not be considered valid unless they fall under peremptory provisions of the law. If material defects or manufacturing faults should arise in a product distributed or manufactured by Team Corally / JSP Group Intl bvba in the European community (EC) and purchased by a consumer, then Team Corally / JSP Group Intl bvba undertakes to correct those defects within the limitations described below. This manufacturer's declaration does not affect the consumer's legal or contractual rights regarding defects arising from the purchase contract between the consumer and the dealer or reseller. Extend of the Warranty If a claim is made under warranty, we take at our discretion to repair or replace the defective goods. We will not consider supplementary claims, especially for reimbursement of costs relating to the defect (e;g. installation / removal costs) and compensation for consequent damages unless they are allowed by statute. This does not affect claims on legal regulations, especially according to the product liability law. Provisions of the Warranty The purchaser is required to make the warranty claim in writing, and must enclose original proof of purchase (e.g. invoice, receipt, delivery note) and the appropriate warranty card. He must send the defective goods to our local representatives or directly to Team Corally / JSP Group Intl bvba, Geelseweg 80, 2250 Olen, Belgium at his own risk and cost. The purchaser should state the material defect or manufacturing fault, or symptoms of the fault, as accurate as possible, so that we can check if our warranty obligation is applicable. The goods are transported from the consumer to us, and from us to the consumer, entirely at the risk and cost of the consumer. Invalidation of the Warranty The consumer cannot make a claim under warranty when the fault is affecting the use of the product arising from natural wear, competition use, or improper use (including installation) or external forces. The consumer's adherence to the building and operating instructions relevant to the model, including the installation, operation, use of, and maintenance of, model-related components cannot be supervised by Team Corally / JSP Group Intl bvba. Therefore Team Corally / JSP Group Intl bvba is in no way liable for loss, damage, or costs resulting from improper use, or behaviour in any way connected to the above described provisions. Unless otherwise required by law, Team Corally / JSP Group Intl bvba is in no way whatever liable to provide compensation for damages arising from the improper use of the model (including personal injury, death, damage to buildings, loss of turnover, loss of business, or interruption of business, or any other direct, or indirectly caused, consequential damage). Duration of Validity The claim period is 24 months from the date of purchase of the product by the consumer from a dealer in the European Community (EC) counted from the date of purchase. The claim period is 12 months from the date of purchase of the product by the consumer from a dealer outside the European Community (EC) counted from the date of purchase. If a defect arises after the end of the claim period, or if evidence or documents required according to this declaration in order to make the claim valid are not presented until after this period, then the consumer forfeits any rights or claims from this declaration. The guarantee period is not prolonged by the granting of any claims within the framework of this warranty, especially in the case of repair or replacement. The guarantee period also does not restart in such cases. Warranty Expiration If we do not acknowledge the validity of a claim based on this declaration within the claim period, all claims based on this declaration will expire after six months from the time of registering the claim; however this cannot occur prior to the end of the claim period. For any support, you can contact us by email at info@corally.com WEEE: At the end of this device's useful life, please remove all the batteries and dispose of them separately. Take electrical appliances to the local collection points for waste electrical and electronic equipment. Other components can be disposed of in domestic refuse. Thank you for your co-operation! 14 DECLARATION OF CONFORMITY EU-Konformitätserklärung · Déclaration de Conformité UE · EU-Verklaring van Overeenstemming (in accordance with ISO/IEC 17050-1) / (in Übereinstimmung mit ISO/IEC 17050-1) / (Conformément à la norme ISO/IEC 17050-1) / (In overeenstemming met ISO/IEC 17050-1) Type Name/ Typ Name/ Nom/ Type Naam : CT3P Description/ Beschreibung/ Description/ Beschrijving : Transmitter Item Number/ Artikel Nummer/ Numéro d'article/ Artikel Nummer : C-59065 This declaration is issued under the sole responsibility of the manufacturer. Die alleinige Verantwortung für die Ausstellung dieser Erklärung trägt der Hersteller. La présente déclaration est établie sous la seule responsabilité du fabricant. Deze verklaring wordt afgelegd onder de uitsluitende verantwoordelijkheid van de fabrikant. Product(s)/Produkt(e)/Produit(s)/Product(en): Corally CT3P -The object of declaration described above is in conformity with the relevant Union harmonization Le- gislation, specifically the requirements of the specifications listed below, following the provisions of the European RED Directive 2014/53/EU, 2011/65/EU (RoHS): -Der Gegenstand dieser Erklärung ist konform mit den Harmonisierungsrechtsvorschriften der Europäischen Union, insbesondere mit den unten aufgeführten Bestimmungen, und folgt der europäischen RED Direktive 2014/53/EU , 2011/65/EU (RoHS) -L'objet de la déclaration décrit ci-dessus est conforme à la législation pertinente en matière d'harmo- nisation de l'Union européenne, en particulier les exigences des spécifications énumérées ci-dessous, conformément aux dispositions des directives européennes RED 2014/53/EU, 2011/65/EU (RoHS) -Het voorwerp van de hierboven beschreven verklaring voldoet aan de relevante EU-harmonisatiewetgeving, met name aan de eisen van de hieronder vermelde specificaties, in overeenstemming met de bepalingen van de EU-richtlijnen RED 2014/53/EU, 2011/65/EU (RoHS): EMC: RADIO: SAFETY: RoHS: EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 300 328 V2.1.1 EN 62479 : 2010 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 EN 50581:2012 Signed for and on behalf of/ Unterzeichnet für und im Namen von/ Signé pour et au nom de :/ Ondertekend voor en namens : JSP GROUP INTL · Geelseweg, 80 · 2250 Olen · Belgium Place and Date/ Ort und Datum/ Lieu et date/ Plaats en datum : Olen, Belgium, 08 Juni 2021 Name/ Name/ Nom/ Naam : Stefan Engelen Title/ Titel/ Titre/ Titel : Ceo Signature/ Unterschrift/ Signature/ Handtekening : 15 Team Corally is a registered trademark licensed to JSP Group Intl bvba · Geelseweg 80 · B-2250 OLEN · BELGIUM Tel: +32 14 25 92 94 · support@corally.com