Kodak REELZ Film Digitizer

Introduction

Thank you for purchasing the Kodak REELZ Film Digitizer. This user guide provides instructions for safe and proper use of the product. Failure to follow these guidelines may void the limited warranty. Read all instructions before use and keep this guide for future reference. This product is intended for domestic use only and not for commercial use. It is covered by a one-year limited warranty, subject to limitations and exclusions.

Specifications

• Dimensions: 31.5 cm H | 15.4 cm W | 21.3 cm D (12.4" | 6.1" | 8.4")
• Image Sensor: 1/3" CMOS sensor, 8.08 megapixels (3280 x 2464)
• Native Resolution: 1296p
• Display: 5" TFT LCD
• Memory Capacity: Up to 128GB SD card
• File Output Format: MPEG-4
• Power Source: 12V DC
• Exposure Control: Auto, Manual (-2 to +2 EV)
• White Balance: Auto
• Frame Rate: 20 frames/sec
• Focus System: Fixed focus
• Scanning Speed: 2 frames/sec
• Language Options: English/Spanish/French/German/Italian
• Supported Systems: Windows XP, Vista/Windows 7, 8, and 10/Mac 10.7.3
• Compatible Film Reel Sizes: 3" - 9" empty reel

Package Contents

• Kodak REELZ Film Digitizer
• 7-inch empty film reel
• AC/DC adapter
• Gray reel adapter
• Red reel adapter
• Micro USB cable
• Cleaning cloth
• User guide

Safety Precautions

• WARNING: CHOKING HAZARD - Contains small parts. Not suitable for children under 3 years.
• Remove all packaging before use. Keep packaging materials away from children and pets.
• Dispose of packaging materials properly after unpacking to avoid suffocation or choking hazards.
• Read all instructions carefully before operating.
• Do not attempt to disassemble or modify the device.
• Do not use if there is smoke or an unusual odor.
• Do not use alcohol, gasoline, thinner, or other organic solvents for cleaning.
• Do not use in dusty or humid environments.
• Ensure the device is clean before use.
• Keep the scanner out of reach of children.
• Do not handle the scanner with wet hands to avoid damage or electric shock.
• Do not place, drop, or immerse the scanner in water or other liquids. If dropped in water, unplug immediately and then retrieve it.
• Prevent objects from falling onto or liquids from spilling onto the scanner.

About the Product

• Converts 8mm and Super 8 reels into digital video files.
• Easy to use.
• Transfer converted video files to an SD card.
• No computer, software, or drivers required.
• High-quality, frame-by-frame scanning process.

Product Overview

The Kodak REELZ Film Digitizer features a control panel, display screen, reel spindles, film type switch, film reels, film cover, film cover latch, and an empty reel.

Control Panel Overview:

• 1. Power
• 2. OK/Enter
• 3. Back
• 4. Left
• 5. Down
• 6. Right
• 7. Up
• 8. Minus
• 9. Plus

Port Overview

• 1. SD card slot
• 2. Micro USB port
• 3. DC 12V port

Film Installation

1. Unfold the reel spindles until they click into place.
2. Gently remove the film end from your 8mm or Super 8 reel. Re-roll the film end tightly and insert it into the slot of the empty reel.
3. Turn the empty reel several times to ensure the film is securely attached.
4. Insert your reel onto the left spindle and the empty reel onto the right spindle. Use the red adapter for large reel holes and the gray adapter for the right spindle if needed.
5. Carefully thread the film between the two reels and into the scanner, following the white line.
6. Push the film cover latch to the left to lift the film cover. Gently wipe the film area with the cleaning cloth before placing the film.
7. Hold the film firmly and place it under the first black tab (leftmost).
8. Gently turn the film and place it under the second black tab.
9. Slightly twist the film to place it under the third tab.
10. Press the film near the fourth tab to secure it.
11. Press the film once more to ensure it is under all four tabs. You should hear a click.

Note: If the film is correctly placed, the gray pin will automatically adjust. If the film appears out of frame on the screen, slide the film type switch back and forth once, or use the frame adjustment option in the capture menu.

Using the Device

Film Type and Frame Size

Standard 8mm film has a frame size of 4.5 x 3.3 mm. Super 8 film has a frame size of 5.79 x 4.01 mm. Ensure the film type switch is set correctly.

Note: If your image appears upside down, you are at the end of the film and need to rewind onto another reel.

Operation Instructions

1. Connect the power adapter to the scanner and plug it into a power outlet.
2. Insert an SD card (not included) into the SD card slot, ensuring it is facing upwards.
3. Press the power button to turn on the scanner. The main menu will appear. A white LED indicates the scanner is powered on.

Note: The scanner automatically turns off after 15 minutes of inactivity. The scanner may freeze if parts of the film are distorted. Ensure the film is in good condition. The scanner cannot process damaged, overlapping, torn, misaligned, or twisted film. Use adhesive tape to repair torn film sections, applying it carefully and sparingly. Excessive tape may cause the film to jam.

Menu Functions

Power On/Off

Press the power button to start the machine. Press the power button again to turn it off.

Note: The power indicator light next to the power button illuminates when the scanner is on. The screen may take a few seconds to activate. The scanner does not record sound.

Main Menu: Capture

Select “Capture” from the main menu and press OK/Enter to enter the “Video Preview” mode. In this mode, you will see options for Recording, Image Adjustment, and Image.

Recording Function

1. Select “Record” in the video preview mode. The record icon will appear in white.
2. Press OK/Enter to enter the prompt to switch between Super 8 and 8mm film.
3. Use the film type switch to select the film type, then press OK/Enter to record.

The device captures each frame and combines it into a digital video. The film is scanned frame by frame and transferred to the inserted SD card. If the film is damaged or jammed, lift the film cover and push the damaged area past the illuminated scanning zone. Ensure the film is properly in place and close the cover. Pressing OK/Enter during recording will stop it and automatically save the MP4 file. Files stopped 15 seconds after recording begins will not be saved.

Image Adjustment Function

1. In the video preview mode, select “Image Adjustment” using the Up or Down buttons. Press OK/Enter to enter the adjustment interface.
2. Use the directional arrow buttons to adjust margins and the Plus or Minus buttons to zoom in or out.
3. Press OK/Enter to confirm the settings.

Note: Adjusting the frame before recording ensures efficient scanning. This function allows you to improve the image appearance by adjusting exposure (brightness/darkness), sharpness, and tint. “Reset to default values” restores all settings.

Image Function

1. In the video preview mode, select “Image” using the Up or Down buttons. Press OK/Enter to enter the image settings interface.
2. Select “Exposure,” “Sharpness,” “Tint,” or “Reset to default values” using the Up or Down buttons. Use the Plus or Minus buttons to adjust the parameter values.
3. Press OK/Enter to confirm the desired settings.

Note: This function adjusts the image display. Exposure controls brightness, sharpness controls clarity, and tint controls color. Resetting to default values restores all settings.

Main Menu: Menu

Select “Menu” from the main menu and press OK/Enter to access the menu interface. Options include My Recordings, Rewind, and Fast Forward.

My Recordings Function

1. Select “My Recordings” and press OK/Enter.
2. Use the directional keys to select an MP4 file.
3. Press OK/Enter to play the file or Minus to delete it.

Rewind Function

1. Select “Rewind” from the menu using the Up or Down buttons. Press OK/Enter to access.
2. Follow the on-screen instructions to start rewinding.

IMPORTANT: Invert the left and right reels before rewinding. The machine only works from left to right, so reels must be swapped for the rewinding process.

Note: Use the dotted line to thread the negative for rewinding. Lift the film from the film slot so the gray pin does not slow the film.

Fast Forward Function

1. Select “Fast Forward” from the menu using the Up or Down buttons. Press OK/Enter to access.
2. Follow the on-screen instructions to proceed.

Note: Fast Forward and Rewind are used to rewind your reel. The difference is that for rewinding, reels must be inverted for the film to be scanned correctly. Fast Forward is used to decide where to start recording and to speed through parts of your film. Use the dotted line to thread the negative for fast forward. Lift the film from the film slot so the gray pin does not slow the film.

Main Menu: Settings

Select “Settings” from the main menu and press OK/Enter to access the settings interface. Options include Language, USB Upload, Erase SD card, Factory Reset, and About.

Language Section

1. Select “Language” and press OK/Enter to confirm.
2. Use the directional keys to select a language and press OK/Enter to confirm your choice.

USB Upload Section

MP4 video files are saved to the SD card. Connect the KODAK REELZ Film Digitizer to your computer using the Micro USB cable (included) to transfer files.

1. Connect your device to a PC via USB.
2. Select “USB Upload”; the screen will indicate the device is connected and the SD card storage is accessible via PC.

Note: The Micro USB cable must be connected before proceeding to the “USB Upload” screen.

Erase SD Card Section

1. Select “Erase SD card” and press OK/Enter to confirm.
2. Select “No” to return to the previous screen.
3. Select “Yes” to erase the SD card files.

Factory Reset Section

1. Select “Factory Reset” and press OK/Enter to confirm.
2. Select “No” to return to the previous screen.
3. Select “Yes” to restore default settings.

About Section

1. Select “About” and press OK/Enter to view the website and version.
2. Press OK/Enter or Back to exit the screen.

Customer Service

If you encounter any problems with your product, please contact customer service before returning it to the place of purchase. We are here to help!

• USA Support: kodak@camarketing.com | 844-516-1539
• International Support: kodakintl@camarketing.com | 844-516-1540

Warranty

Limited Warranty for Original Consumer

The Kodak REELZ Film Digitizer (“Product”), including all included accessories, is warranted by C&A Marketing, Inc. (“Company”) to the original consumer purchaser against defects in materials and workmanship for a period of ONE (1) YEAR from the date of retail purchase by the original end-user purchaser (“Warranty Period”).

To obtain warranty service, the initial purchaser must contact the Company or its authorized service provider for problem determination and service procedures. Proof of purchase, such as a bill of sale or an itemized invoice, must be presented to obtain service.

Service options, parts availability, and response times may vary. The Company may require additional documentation or compliance with registration requirements. Shipping costs to the return center are not covered by this warranty and must be paid by the consumer. The consumer assumes all risks of loss or damage during transit.

Exclusions and Limitations

The Company warrants the product against defects in materials and workmanship under normal use for a period of ONE (1) YEAR from the date of retail purchase. If a material defect occurs and a valid claim is received during the Warranty Period, the Company, at its discretion, will either repair the defect, exchange the product with a new or refurbished one, or refund the purchase price.

Replacement products or parts are warranted for the remainder of the original warranty period or ninety (90) days from the date of replacement or repair, whichever is longer.

This warranty does not apply to:

• Products or software not belonging to Kodak REELZ.
• Damage caused by use of products other than the Kodak REELZ film digitizer.
• Damage caused by accident, abuse, misuse, flood, fire, earthquake, or other external causes.
• Damage caused by use of the Product outside of authorized uses.
• Damage caused by third-party services.
• Products or parts modified without the Company's written authorization.
• Consumable parts like batteries, fuses, and bulbs.
• Cosmetic damage.
• If the serial number has been removed or defaced.

This warranty is valid only in the country where the product was purchased and only applies to products purchased and maintained in that country. The Company does not guarantee uninterrupted or error-free operation of the Product.

The Company is not responsible for damages resulting from failure to follow instructions.

The Company provides the Product “AS IS” and “AS AVAILABLE.” The Company and its licensors expressly disclaim all warranties and conditions, express or implied, including warranties of merchantability, fitness for a particular purpose, title, and non-infringement. The Company does not guarantee specific results from product use, nor that the Company will continue to offer or make the Product available. The Company also disclaims all warranties after the express warranty period.

You use the Product at your own discretion and risk. You are solely responsible for any loss, liability, or damage resulting from your use of the Product.

No advice or information, whether oral or written, obtained from the Company or its service providers shall create any warranty. The Company's total liability arising from or related to the Product shall not exceed the amount actually paid by you for the Product within the last year. This limitation is cumulative and will not be increased by the existence of more than one incident or claim.

The Company disclaims all liability of its licensors, manufacturers, and suppliers. The Company, its licensors, manufacturers, and suppliers shall not be liable for any incidental, direct, indirect, special, punitive, or consequential damages (including lost profits, business, savings, data, or records) caused by the use, misuse, or inability to use the Product.

Some jurisdictions may not allow the exclusion or limitation of indirect or consequential damages, or limitations on warranty, so some limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary by jurisdiction. Contact your authorized dealer to determine if another warranty applies.

Kodak does not manufacture this product and provides no warranty or assistance.

The Kodak brand, logo, and trade dress are used under license from Eastman Kodak Company. MicroSD and SD are trademarks of SD-3C, LLC. Mac is a trademark of Apple Inc. Windows is a trademark of Microsoft Corporation. Other trademarks are the property of their respective owners.

Distributed by C&A Marketing, Inc., 114 Tived Lane East, Edison, NJ 08837 USA. © 2021. C&A IP Holdings LLC. All rights reserved. Made in China.