CyberPower UPS Systems, Battery Backup, PDUs, USB Surge ProtectorsSupport | CyberPower
P65Warnings.ca.gov
User Manual for CyberPower models including: P6WSUC, MP1095WS, P6WSUC 6 Outlet Surge Protector with 2 USB Ports, 6 Outlet Surge Protector with 2 USB Ports, P6WSUC 6 Outlet Surge Protector, 6 Outlet Surge Protector, Surge Protector, Protector
MP1095WS2PK - Surge / Power Strip Multi-Pack - Product Details, Specs, | CyberPower
MP1095WS2PK | User Manual | CyberPower
File Info : application/pdf, 2 Pages, 2.01MB
DocumentDocumentYOUR ULTIMATE ALLY IN POWER MP1095WS USER MANUAL 6-OUTLET SURGE PROTECTOR (6 AC OUTLETS & 2 USB PORTS) P6WSUC 1 2 3 3 4 5 Cyber Power Systems (USA), Inc. 4241 12th Avenue East, Suite 400 | Shakopee, MN 55379 CyberPowerSystems.com FEATURES 1 . USB-A Charging Port (1) 2 . USB-C Charging Port (1) 3 . Swiveling Standard Grounded Outlets (6) 4 . Protected LED Indicator Illuminated when the surge protection feature is working properly. 5 . Grounded LED Indicator Illuminated when a properly grounded AC outlet is detected. SPECIFICATIONS Model Number: P6WSUC Outlets: Swiveling Standard Grounded Outlets (6), USB Charging Ports (2) Surge Protection: 2000 Joules Electrical Rating: 125 V/15 A/1875 W/60 Hz USB-A Charging Output: 5 V/2.4A USB-C Charging Output: 5 V/15 W USB Total output: 5V/3.6A Shared UL Clamping Voltage: UL 1449/600 V (L-N, L-G, N-G) Maximum Peak Current: 60,000 A 3 AC Lines Protected: L-N: 30,000 A; L-G: 15,000 A; N-G: 15,000 A Response Time: Less than 1 nanosecond Attenuation: Up to 32 dB EMI/RFI Filtration: 150 kHz to 100 MHz iWARNING: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS), which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK: Use only in dry locations and only indoors. DO NOT plug into another relocatable power tap. DO NOT "daisy chain" surge protectors. DO NOT use with any aquarium equipment. DO NOT use if properly grounded outlets are not available. DO NOT install this device if there is not at least 10 meters (30 feet) of wire between the electrical outlet and electrical service panel. DO NOT use for medical or life support equipment. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but it will maintain unprotected power to the load. TROUBLESHOOTING If the grounded indicator does not light when you plug in the surge protector, still does not light, return the product to the retailer for assistance. If the surge protector appears to be working properly, your outlets may not be properly grounded and need to be repaired by a professional electrician. If the protected indicator does not light, the surge protector's AC lines are no longer protected from surge. The surge protector may have received a power surge or spike beyond its specified limits that overloaded the protection circuitry and rendered it inactive. The surge protector has protected your connected equipment as designed, but it will not protect against future surges, and spikes. It should be replaced. FOR MORE INFORMATION Visit CyberPowerSystems.com for more information regarding: · Product information and certifications · Product warranty · Connected equipment guarantee TECHNICAL SUPPORT Visit: CyberPowerSystems.com/support Toll-Free: 1-877-297-6937 © 2022 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners. CONFORMANCE APPROVALS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. YOUR ULTIMATE ALLY IN POWER 8-OUTLET SURGE PROTECTOR (8 AC OUTLETS & 2 USB PORTS) P806UC36A USER MANUAL 1 2 3 4 4 6 7 5 5 Cyber Power Systems (USA), Inc. 4241 12th Avenue East, Suite 400 | Shakopee, MN 55379 CyberPowerSystems.com FEATURES 1. ON/OFF Reset Control Switch and Circuit Breaker Controls power to all outlets. The switch is also a 15 A breaker. When an overload occurs, the surge protector the overload condition is removed and reset the surge protector by switching the unit ON. 2. Surge Protected Indicator LED Illuminated when the surge protection feature is working properly. 3. Grounded Indicator LED Illuminated when a properly grounded AC outlet is detected. 4. Standard Grounded Outlets (6) 5. Wide-Spaced Outlets (2) Plug in large chargers without interfering with the other outlets. 6. USB-A Charging Port (1) 7. USB-C Charging Port (1) SPECIFICATIONS Model Number: P806UC36A Outlets: 6 Standard Grounded Outlets, 2 Wide-Spaced Outlets, 1 USB-A, 1 USB-C Charging Port Surge Protection: 2,700 Joules Electrical Rating: 125 V/15 A/1875 W USB-A Charging Output: 5 V/2.4A USB-C Charging Output: 5 V/15 W USB Total output: 5V/3.6A Shared UL Clamping Voltage: UL 1449 4th/600 V (L-N, L-G, N-G) Maximum Peak Current: 75,000 A 3 AC Lines Protected: L-N: 45,000 A; L-G: 15,000 A; N-G: 15,000 A Response Time: Less than 1 nanosecond Attenuation: Up to 32 dB EMI/RFI Filtration: 150 kHz to 100 MHz Circuit Breaker: Resettable 15 Amp Power Cord Length: 6 ft Plug Type: Low Profile iWARNING: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS), which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK: Use only in dry locations and only indoors. DO NOT plug into another relocatable power tap. DO NOT "daisy chain" surge protectors. DO NOT use with any aquarium equipment. DO NOT use if properly grounded outlets are not available. DO NOT install this device if there is not at least 10 meters (30 feet) of wire between the electrical outlet and electrical service panel. DO NOT use for medical or life support equipment. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but it will maintain unprotected power to the load. TROUBLESHOOTING If the ON/OFF is switched OFF, the 15 Amp circuit breaker may have tripped. Examine your connected equipment and remove the device that is overloading the circuit. Then, turn the ON/OFF switch back to RESET. If the grounded indicator does not light when you plug in the surge protector, move light, return the product to the retailer for assistance. If the surge protector appears to be working properly, your outlets may not be properly grounded and need to be repaired by a professional electrician. If the protected indicator does not light, the surge protector's AC lines are no longer protected from surge. The surge protector may have received a power surge or spike beyond its specified limits that overloaded the protection circuitry and rendered it inactive. The surge protector has protected your connected equipment as designed, but it will not protect against future surges, and spikes. It should be replaced. FOR MORE INFORMATION Visit CyberPowerSystems.com for more information regarding: · Product information and certifications · Product warranty · Connected equipment guarantee TECHNICAL SUPPORT Visit: CyberPowerSystems.com/support Toll-Free: 1-877-297-6937 © 2022 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners. CONFORMANCE APPROVALS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. K01-1101120-00