DC Programmable Cycle Timer

The diagram illustrates the DC Programmable Cycle Timer. It features a digital display showing "8.8.8." and labels indicating time units: 'K' for Hour (H), 'H' for Minute (M), and 'S' for Second (S). Below the display are five circular buttons labeled S1 through S5. The timer also indicates the ON/OFF status via an LED: GREEN for ON and RED for OFF. The display itself is referred to as a "Digital Tube Display".

• Unit of time indication: H: Hour(H), M: Minute(M), S: Second(S)
• Button control:
  • S1: Button for ON configuration
  • S2: Button for OFF configuration
  • S3: Number of display control
  • S4: Change the H/M/S
  • S5: 1. Choose Letter from 0 to 9, 2. Swift ON/OFF
  • S4+S5: Quick ON
• ON/OFF Status: K-GREEN(ON), RED(OFF)

Operation

A. Connect the timer with power and machine. The display shows 10, and the (K) and (S) indicators stay ON. The machine begins to work. The initiation default value is 10 seconds (ON) + 10 seconds (OFF).

B. How to set up the "ON" for cycle:

1. Hold S1 for 3 seconds. The (K) indicator will turn green, and (S) will flash.
2. Press S4 to set up the Hour (H flashing). Press S4 again to set up the Minute (M flashing), and then press S4 again to set up the Seconds (S flashing).
3. Set up the ON time: Press S3. The digital tube display will flash, then press S5 to set the time you need. For example, to set up 38 seconds, it will show "038" in the display.
4. Hold S1 for 3 seconds to confirm the ON time setting.

C. How to set up the "OFF" for cycle:

1. Hold S2 for 3 seconds. The (K) indicator will turn red, and (S) will flash.
2. Press S4 to set up the Hour (H flashing). Press S4 again to set up the Minute (M flashing), and then press S4 again to set up the Seconds (S flashing).
3. Set up the OFF time: Press S3. The digital tube display will flash, then press S5 to set the time you need. For example, to set up 10 seconds, it will show "0.1.0" in the display.
4. Hold S2 for 3 seconds to confirm the OFF time setting.

D. How to operate startup and shutdown:

1. Hold S5 for 3 seconds. The cycle timer will operate startup and shutdown.
2. Simultaneously press S4 and S5. The cycle timer will operate continuously.

--- How to check the ON/OFF status while running:

If you need to check the "ON" and "OFF" time configuration when the timer is working, you can press S1 to check the ON time, and press S2 to check the OFF time. The display will show the setting for 3 seconds before returning to normal operation.

--- New Function:

The set value memory has been increased. If the power is interrupted and then restored, the timer will resume operation automatically.