Alphacool ES Orbiter 360 TS

Safety Instructions

Please observe the following safety instructions to prevent damage to the device or personal injury.

Accessories

Item A: Funnel G1/4
Item B: Power Supply 120cm
Item C: Power Plug 50cm
Digital Guide

Dimensions

The unit's dimensions are provided in millimeters (mm) in the original documentation, illustrated with a diagram showing specific measurements for various components.

Parts Identification

The original documentation includes a diagram for parts identification, detailing various components of the unit.

Technical Specifications

Detailed technical specifications are available in the original documentation, including performance metrics and physical characteristics.

Installation

Water Connections

Instructions for installing the water connections are provided.

Filling Coolant

Fill the system with coolant. Do not operate the orbiter without coolant!

Connecting to Power

Connect the unit to the power supply. The Orbiter starts automatically upon connection.

Checking Minimum Filling Level

During initial setup, the coolant level may decrease as air is released from components. Monitor the level and refill with coolant as needed.

Troubleshooting

Pump Noise

Issue: The pump makes noticeable noises.

Cause: Air in the system or insufficient coolant.

Solution: Open the vent port, refill with coolant if necessary, and observe the minimum filling level.

Warning Signal

Issue: The warning signal sounds.

Cause: The pump and/or a fan has failed.

Solution: Drain the water, have the unit inspected by a qualified technician, or return the faulty component.

No Water Pumping

Issue: The system does not pump water.

Cause: The pump is defective.

Solution: Have the pump checked by a qualified technician or return the pump.

Water Leaks

Issue: Water leaks from the system.

Cause: Connections and/or hoses are incorrectly mounted or defective.

Solution: Switch off the device, check connections and hoses, tighten if necessary, or return the parts.

Unit Not Starting

Issue: The Orbiter does not start.

Cause: The power supply is defective or the power plug is not connected properly.

Solution: Replace the power supply or check the power connection.

High Temperature

Issue: The temperature is too high.

Cause: Air supply is impeded or the heat load (1500 watts) is exceeded.

Solution: Clean ventilation from dust, reduce heat source power, or connect a second orbiter if required.

	Alphacool ES Quick Release Connector Kit G1/4 IG/IG - PushIn Industry Version \| Technical Overview Detailed overview of the Alphacool ES Quick Release Connector Kit (G1/4 IG/IG, PushIn Industry Version). Features include G1/4 female connectors, space-saving design, durable nylon construction, and optimized flow for server and workstation water cooling systems.
	Alphacool Water Cooling System: Safety, Warranty, and Installation Guide Comprehensive guide to Alphacool computer water cooling systems, covering safety precautions, warranty terms, installation steps, and contact information. Learn how to properly install and maintain your Alphacool cooling solution.
	Alphacool Eiszapfen 45° G1/4 Angled Adaptor - Black (17590) High-performance, matte black Alphacool Eiszapfen 45° angled adaptor with G1/4" male and female threads, designed for space-saving PC water cooling setups. Includes three coloured O-rings.
	Alphacool Cooling Components: Safety Information and Warranty Essential safety guidelines, usage instructions, and warranty details for Alphacool computer cooling components, including Eisbaer Pro ES and ES Orbiter Filling Station models.
	Alphacool ES Inline Particlefilter 2x G1/4 - Installation and Usage Guide Detailed guide for the Alphacool ES Inline Particlefilter 2x G1/4, covering installation, flow direction, maintenance, and accessories. Learn how to attach adapters and keep your system clean.
	Alphacool NexXxoS HPE-30 Full Copper 280mm Radiator - High Performance PC Cooling Detailed information on the Alphacool NexXxoS HPE-30 Full Copper 280mm Radiator, featuring 100% copper construction, enhanced thermal conductivity, and improved water throughput for PC liquid cooling systems.
	Alphacool Core 1 Carbon CPU Water Cooler - High Performance Cooling Discover the Alphacool Core 1 Carbon, a high-performance CPU water cooler featuring a 3D-Jetplate for efficient heat dissipation. Compatible with AMD AM4/AM5 and Intel LGA 1700 sockets. Includes technical specifications, scope of delivery, and design details.
	Alphacool ES Orbiter Filling Station - Efficient Water Cooling System Filling Discover the Alphacool ES Orbiter Filling Station, designed for easy and effective filling of water cooling systems. Features dual pumps for quick venting, a high-performance filter for coolant cleaning, and an illuminated inspection window.