HAVIT H2590BT PRO Wireless Bluetooth Headphones
User Manual
Package Contents
The package includes:
- Headphones x1
- Charging Cable x1
- Audio Cable x1
- Product Manual x1
- Warranty x1
Product Description
The headphones feature the following components:
- Micro SD Card Slot
- Volume Down / Previous Track
- Play/Pause
- Volume Up / Next Track
- LED Indicator
- Micro USB Charging Port
- AUX Input
- Microphone
- Multifunction Button
Bluetooth Connection
To connect your headphones via Bluetooth:
- Press and hold the multifunction button to turn on the headphones. The LED indicator will flash red and blue alternately, indicating pairing mode.
- Activate Bluetooth on your device and search for "HAVIT H2590BT".
- Select "HAVIT H2590BT" to connect. The indicator light will turn blue when connected.
- Pairing mode lasts for 10 minutes. If the time expires, restart the device and repeat the process.
- The headphones may automatically connect to the last paired device upon power-on. Ensure Bluetooth is enabled on that device.
- The headphones will automatically turn off after 10 minutes of no connection or loss of connection.
Controls
Power On/Off: Press and hold the multifunction button for 3 seconds.
Answer/End Call: Press the multifunction button.
Reject Incoming Call: Press and hold the multifunction button for 2 seconds.
Redial Last Number: Double-press the multifunction button.
Music Playback
Play/Pause: Press the Play/Pause button.
Next Track: Press and hold the button for the next track.
Previous Track: Press and hold the button for the previous track.
Volume Up: Press the Volume Up button.
Volume Down: Press the Volume Down button.
Mode Switching
Press and hold the play/pause button to switch between Bluetooth, FM, Micro SD card, and AUX IN modes.
FM Mode: Press and hold the play/pause button for 2 seconds to select FM mode. Press the play/pause button to scan and save FM radio stations. Use the track buttons to switch channels and adjust volume.
Micro SD Mode: Insert a Micro SD card, and the headphones will automatically recognize and play MP3 files.
Wired Mode: Connect the headphones using the provided 3.5mm audio cable. In this mode, the buttons on the headphones do not function.
Charging and Battery Information
Charging: Use the provided micro USB cable. The charging voltage and current are 5V/200mA. Ensure the input voltage is below 5V/1A. Fully charge the product before first use; subsequent charges take approximately 3 hours. Use a certified charger. Frequent charging and discharging may reduce battery performance over time. The LED indicator is red while charging and turns off when fully charged.
Specifications
- Bluetooth Version: V5.0
- Product Size: 150*195*68mm
- Net Weight: 150g
- Wireless Range: 10m (unobstructed)
- Speaker: Φ40mm
- Speaker Sensitivity: 110±3dB at 1KHz; 1mW
- Supported Profiles: HFP/HSP/A2DP/AVRCP
- Impedance: 32Ω±15%
- Speaker Frequency: 20Hz-20KHz
- Input Voltage/Current: DC 5V /200mA
- Battery Capacity: 200mAh
- Playback Time: 3-4h
- Talk Time: 3-4h
- Voice Chat: Supported
- Material: ABS
Precautions
- Follow the user manual instructions.
- To protect the battery, charge with a current below 5V/1A.
- Use and store the headphones in a normal temperature environment.
- Keep away from heat sources like radiators or hot air regulators. The headphones are not resistant to high temperatures.
- Do not block headphone ports (charging, LED, microphone).
- To protect hearing and speaker lifespan, avoid using maximum volume for extended periods.
- For any damage, contact the service center.
Battery Information (LI-ION and LIPO)
The device uses a rechargeable battery (LI-ION or LIPO) that degrades over time. Battery life may vary from laboratory conditions. To maintain battery health, avoid discharging below 3.18V (LI-ION) or 3.5V (LIPO). Discharging below 2.5V (LI-ION) or 3.2V (LIPO) can cause permanent damage. If storing for over a month, charge to 50% and check every two months. Store in a dry place away from sun and extreme temperatures.
Safety Precautions
- Ensure device contacts are clean before charging.
- Never leave the device unattended during use or charging.
- Ensure you can quickly disconnect the device from the power source in an emergency.
- Do not expose the device to high temperatures.
- Charge in a dry, well-ventilated area, away from flammable materials, with at least 1m of clear space.
- Do not cover the device while charging.
- Use only manufacturer-recommended chargers and cables.
- Be aware that the device contains batteries that are difficult to extinguish; have a fire blanket available.
Environmental Protection
Electronic waste should not be disposed of with household waste. It should be collected and recycled separately. Proper disposal prevents negative environmental and health consequences. Contact local authorities or retailers for disposal information. The product complies with EU directives regarding safety, health, and environmental protection.
Declaration of Conformity
Manufacturer: GUANGZHOU HAVIT TECHNOLOGY COMPANY LIMITED
Address: ROOM R. 1305-1308, POLY WORLD TRADE CENTER, PHASE 2, C BUILDING, XINGANGDONG ROAND, HAIZHU DISTRICT, GUANGZHOU, CHINA
This product conforms to European Parliament and Council Directive 2014/53/UE. The declaration of conformity is available at: https://files.innpro.pl/Havit
Radio Frequency: 2402MHz-2480MHz
Max. Radio Frequency Power: -6dBm
Warranty Information
Detailed warranty conditions are available at: https://serwis.innpro.pl/gwarancja. Regular maintenance (cleaning) is recommended, either by the user or specialized service points. Assess the product's physical condition regularly and perform necessary maintenance. Failure to do so may result in permanent damage. The warranty does not cover damage due to neglect.
