ASUS PRIME B560-PLUS Motherboard User Manual

Safety Information

Electrical Safety

• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• When adding or removing devices, ensure power cables are unplugged before connecting signal cables. Disconnect all power cables if possible before adding a device.
• Before connecting or removing signal cables from the motherboard, ensure all power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord, as they can interrupt the grounding circuit.
• Ensure your power supply voltage matches your electrical outlet. Contact your local power company if unsure.
• If the power supply is broken, do not attempt to fix it yourself. Contact a qualified service technician or retailer.

Operation Safety

• Before installing the motherboard and components, carefully read all accompanying manuals.
• Ensure all cables are correctly connected and power cables are undamaged before use. Contact your dealer if any damage is detected.
• Keep paper clips, screws, and staples away from connectors, slots, sockets, and circuitry to avoid short circuits.
• Avoid dust, humidity, and extreme temperatures. Do not place the product in areas exposed to moisture.
• Place the product on a stable surface.
• Contact a qualified service technician or retailer for technical problems.
• Operate the motherboard in ambient temperatures between 0°C and 40°C.

About This Guide

This user guide contains the information needed for installing and configuring the motherboard.

How This Guide Is Organized

• Chapter 1: Product Introduction: Describes motherboard features, new technology, switches, jumpers, and connectors.
• Chapter 2: BIOS Information: Details how to boot into BIOS and upgrade BIOS using EZ Flash Utility.

Where to Find More Information

• ASUS Website: For updated information on ASUS hardware and software products. Refer to ASUS contact information.
• Optional Documentation: May include warranty flyers or other dealer-added documents.

Conventions Used in This Guide

• ⚠️ CAUTION: Information to prevent damage to components and personal injury.

• ❗ IMPORTANT: Instructions that MUST be followed.

• ℹ️ NOTE: Tips and additional information.

Package Contents

Verify your motherboard package contains the following items:

• 1 x PRIME B560-PLUS motherboard
• 2 x SATA 6Gb/s cables
• 1 x M.2 Key E screw package
• 1 x I/O Shield
• 1 x M.2 Rubber package
• 1 x M.2 SSD screw package
• 1 x Support DVD
• 1 x User manual

Contact your retailer if any items are damaged or missing.

PRIME B560-PLUS Specifications Summary

CPU

Intel® Socket LGA1200 for 11th Gen Intel® Core™ Processors & 10th Gen Intel® Core™, Pentium® Gold and Celeron® Processors*

• Supports Intel® 14 nm CPU
• Supports Intel® Turbo Boost Technology 2.0 and Intel® Turbo Boost Max Technology 3.0* (Support depends on CPU types)

Chipset

Intel® B560 Chipset

Memory

4 x DIMM, Max. 128GB, DDR4 4600(OC)/4400(OC)/4266(OC)/4000(OC)/3733(OC)/3600(OC)/3466(OC)/3333(OC)/3200(OC)/2933/2800/2666/2400/2133 MHz Non-ECC, Un-buffered memory

• Dual Channel Memory Architecture
• Supports Intel® Extreme Memory Profile (XMP)
• ASUS OptiMem
• 10th Gen Intel® Core™ i7/i9 processors support 2933/2800/2666/2400/2133 natively; others run at DDR4 2666MHz.
• 11th Gen Intel® processors support 2933/2800/2666/2400/2133 natively.
• Refer to www.asus.com for Memory QVL and frequency support details.

Graphics

1 x DisplayPort 1.2**, 1 x D-Sub, 1 x HDMITM 1.4/2.0***

• * Graphics specifications vary by CPU type.
• ** 11th & 10th Gen Intel® processors support DisplayPort 1.4 (max. 4096 x 2304 @60Hz).
• *** 11th Gen Intel® processors support HDMITM 2.0 (max. 4K@60Hz); others support HDMITM 1.4 (max. 4K@30Hz).

Expansion Slots

Intel® 11th & 10th Gen Processors

• 1 x PCIe 4.0/3.0 x16 slot* (11th Gen: PCIe 4.0 x16; 10th Gen: PCIe 3.0 x16)

Intel® B560 Chipset

• 1 x PCIe 3.0 x16 slot (supports x4 mode)*
• 2 x PCIe 3.0 x1 slots
• * Enable RST PCIe Storage Remapping for PCH attached PCIe slots to activate Intel® Optane Memory.

Storage

Total supports 2 x M.2 slots and 6 x SATA 6Gb/s ports

• Intel® 11th Gen Processors: M.2_1 slot (Key M) type 2242/2260/2280/22110 (supports PCIe 4.0 x4). This slot is disabled for other CPUs.
• Intel® B560 Chipset: M.2_2 slot (Key M) type 2242/2260/2280/22110 (supports PCIe 3.0 x4 & SATA modes).
• 6 x SATA 6Gb/s ports.
• Note: When a device is in SATA mode on M.2_2, SATA6G_2 port cannot be used.

Ethernet

1 x Intel® I219-V 1Gb Ethernet, ASUS LANGuard

USB

Rear USB (Total 7 ports)

• 2 x USB 3.2 Gen 2 ports (Type-A)
• 1 x USB 3.2 Gen 1 port (Type-C®)
• 4 x USB 2.0 ports (Type-A)

Front USB (Total 6 ports)

• 1 x USB 3.2 Gen 1 header (supports 2 additional USB 3.2 Gen 1 ports)
• 2 x USB 2.0 headers (supports 4 additional USB 2.0 ports)

Audio

Realtek ALC 897 7.1 Surround Sound High Definition Audio CODEC*

• Supports: Jack detection, Multi-streaming, Front Panel Jack-retasking
• Supports up to 24-Bit/192 kHz playback
• Audio Features: Audio Shielding, Premium Japanese audio capacitors, Dedicated audio PCB layers.
• * A chassis with an HD audio module in the front panel is required for 7.1 Surround Sound audio output.

Back Panel I/O Ports

• 2 x USB 3.2 Gen 2 ports (Type-A)
• 1 x USB 3.2 Gen 1 port (Type-C® port)
• 4 x USB 2.0 ports (Type-A)
• 1 x DisplayPort
• 1 x D-Sub port
• 1 x HDMITM port
• 1 x Intel® I219-V 1Gb Ethernet port
• 3 x Audio jacks
• 1 x PS/2 Keyboard/Mouse combo port

Internal I/O Connectors

Fan and Cooling related

• 1 x 4-pin CPU Fan header
• 3 x 4-pin Chassis Fan headers

Power related

• 1 x 24-pin Main Power connector
• 1 x 8-pin +12V Power connector

Internal I/O Connectors (Continued)

Storage related

• 2 x M.2 slots (Key M)
• 6 x SATA 6Gb/s ports

USB

• 1 x USB 3.2 Gen 1 header (supports 2 additional USB 3.2 Gen 1 ports)
• 2 x USB 2.0 headers (supports 4 additional USB 2.0 ports)

Miscellaneous

• 2 x AURA Addressable Gen 2 headers
• 2 x AURA RGB headers
• 1 x Clear CMOS header
• 1 x COM Port header
• 1 x Front Panel Audio header (AAFP)
• 1 x M.2 slot (Key E)
• 1 x S/PDIF Out header
• 1 x SPI TPM header (14-1pin)
• 1 x 20-3pin System Panel header with Chassis intrude function
• 1 x Thunderbolt™ header

Special Features

• ASUS 5X PROTECTION III: DIGI+ VRM, LANGuard, Overvoltage Protection, SafeSlot Core+, Stainless-Steel Back I/O
• ASUS Q-Design: Q-DIMM, Q-Slot
• ASUS Thermal Solution: Flexible M.2 heatsink, VRM heatsink design
• ASUS EZ DIY: Box Headers

Software Features

• AURA Sync: AURA RGB headers, AURA Addressable Gen 2 RGB headers
• ASUS Exclusive Software: Armoury Crate (AURA Creator, AURA Sync), AI Suite 3 (Performance And Power Saving Utility, TurboV EVO, EPU, DIGI+ VRM, Fan Xpert 2+, EZ update), ASUS CPU-Z, DAEMON Tools
• Norton Anti-virus software (Free Trial version), WinRAR
• UEFI BIOS: ASUS EZ DIY, ASUS CrashFree BIOS 3, ASUS EZ Flash 3, ASUS UEFI BIOS EZ Mode
• BIOS: 128 Mb Flash ROM, UEFI AMI BIOS
• Manageability: WOL by PME, PXE
• Operating System: Windows® 10 64-bit
• Form Factor: ATX Form Factor, 12.0 inch x 9.2 inch (30.5 cm x 23.4 cm)

Connectors with Shared Bandwidth

This section describes connectors that share bandwidth. The diagram shows the layout of these connectors.

• Configuration Table:

Notes:

• The M.2_2 slot shares bandwidth with the SATA6G_2 port.
• When a device in SATA mode is installed on the M.2 socket, the SATA6G_2 port cannot be used.

Chapter 1: Product Introduction

1.1 Before You Proceed

Take note of the following precautions before installing motherboard components or changing settings:

• Unplug the power cord from the wall socket before touching any component.
• Use a grounded wrist strap or touch a grounded object/metal object (like the power supply case) to avoid static electricity damage when handling components.
• Ensure the ATX power supply is switched off or the power cord is detached before installing or removing components to prevent severe damage.

1.2 Motherboard Overview

The motherboard layout is illustrated with numbered components. Key components include the CPU socket (LGA1200), DDR4 DIMM slots, expansion slots (PCIe), power connectors (ATX 12V, EATXPWR), storage connectors (M.2, SATA), USB headers, fan headers, audio connectors, and various internal I/O headers.

1.2.1 Layout Contents

1. CPU Socket: LGA1200 socket for 11th Gen Intel® Core™ Processors & 10th Gen Intel® Core™, Pentium® Gold and Celeron® Processors.
2. DDR4 DIMM Slots: Four slots for DDR4 memory modules.
3. Expansion Slots: Supports PCIe x16 graphics cards and PCIe 3.0 x1 cards.
4. Fan Headers: Connectors for system fans.
5. Power Connectors: For connecting the motherboard to a power supply. Ensure the 8-pin power plug is connected. A minimum 350W ATX 12V Specification 2.0 (or later) power supply is recommended for a fully configured system.
6. M.2 Slots (Key M): Allow installation of M.2 devices like SSDs. M.2_1 supports PCIe 4.0 x4 (11th Gen CPUs only), M.2_2 supports PCIe 3.0 x4 and SATA modes.
7. SATA 6Gb/s Connectors: For connecting SATA devices like optical drives and hard disk drives.
8. USB 3.2 Gen 1 Header: Connects a USB 3.2 Gen 1 module for additional ports, supporting up to 5 Gb/s.
9. USB 2.0 Headers: Connects USB modules for four additional USB 2.0 ports, supporting up to 480 Mb/s. Do not connect 1394 cables to USB connectors.
10. AURA Addressable Gen 2 Headers: For connecting addressable RGB WS2812B LED strips (5V/Data/Ground), with a maximum power rating of 3A (5V) per header and a combined maximum of 500 LEDs.
11. AURA RGB Headers: For connecting RGB LED strips (12V/G/R/B), with a maximum power rating of 3A (12V) and a maximum length of 3m.
12. Clear CMOS Header: Clears CMOS RTC RAM data (date, time, passwords). Short the pins to erase.
13. COM Port Header: For a serial (COM) port.
14. Front Panel Audio Header: For chassis-mounted HD audio modules.
15. S/PDIF Out Header: For an additional Sony/Philips Digital Interface (S/PDIF) port.
16. SPI TPM Header: Supports Trusted Platform Module (TPM) systems for secure storage.
17. 20-3 Pin System Panel Header: For system power LED, HDD activity LED, and system warning speaker. Also includes ATX power button/soft-off button, Reset button, and Chassis intrusion header.
18. Thunderbolt™ Header: For connecting add-on Thunderbolt™ I/O cards and devices.

1.2.2 Rear Panel Connectors

The rear panel provides various connectivity options:

1. PS/2 Keyboard/Mouse Combo Port: For PS/2 mouse or keyboard.
2. Video Graphics Adapter (VGA) Port: 15-pin port for VGA monitors.
3. Ethernet Port: Gigabit connection to a LAN. Includes LED indicators for Activity/Link and Speed.
4. Line In Port (Light Blue): Connects audio sources like tape, CD, DVD players.
5. Line Out Port (Lime): Connects headphones or speakers. In multi-channel configurations, it serves as Front Speaker Out.
6. USB 2.0 Ports: 4-pin ports for USB 2.0 devices.
7. HDMITM Port: For High-Definition Multimedia Interface connectors, HDCP compliant for protected content playback.
8. DisplayPort: For DisplayPort-compatible devices.
9. USB 3.2 Gen 1 (Type-C®) Port: Connects USB 3.2 Gen 1 devices.
10. USB 3.2 Gen 2 Ports: 9-pin ports for USB 3.2 Gen 2 devices (up to 10Gbps).
11. Microphone Port (Pink): Connects a microphone. The function of audio ports varies by channel configuration (2, 4, 5.1, or 7.1).

1.3 Central Processing Unit (CPU)

This motherboard uses an LGA1200 socket for 11th Gen Intel® Core™ Processors & 10th Gen Intel® Core™, Pentium® Gold and Celeron® Processors. Ensure correct CPU installation to avoid damage. Keep the PnP cap for RMA purposes. Warranty does not cover damage from incorrect CPU installation.

Installing the CPU

Follow these steps for CPU installation:

1. Unplug all power cables.
2. Ensure the correct CPU for the LGA1200 socket is used.
3. Check the socket for the PnP cap and ensure contacts are not bent.
4. Install the CPU carefully into the socket, aligning the triangle marks.
5. Secure the CPU with the retention mechanism.
6. Apply Thermal Interface Material to the CPU heatsink and CPU before installing the heatsink and fan.

1.4 System Memory

The motherboard features four DDR4 DIMM sockets. Memory installation involves aligning the notch on the DIMM with the socket and pushing down until the clips secure it. Dual-channel memory configuration is supported. Ensure compatibility with CPU memory support speeds.

1.5 M.2 Installation

To install an M.2 storage device:

• Install the bundled M.2 rubber pad before installing single-sided M.2 devices. Do not install rubber pads for double-sided M.2 devices.
• Secure the M.2 device with screws.

Chapter 2: BIOS Information

2.1 Knowing BIOS

The ASUS UEFI BIOS provides a user-friendly interface for system configuration. BIOS stores hardware settings like storage configuration, overclocking, and boot device settings. Default settings are recommended for optimal performance. Change settings only when necessary (e.g., error messages, new component installation).

2.2 BIOS Setup Program

Access BIOS Setup by pressing or during POST. You can also enter BIOS after POST by pressing ++ simultaneously, using the reset button, or power cycling the system. A USB mouse is recommended for easier navigation. Load Optimized Defaults () if the system becomes unstable. Clear CMOS if the system fails to boot after changes. The BIOS program does not support Bluetooth devices.

2.3 ASUS EZ Flash 3

ASUS EZ Flash 3 allows BIOS updates without an OS. Ensure BIOS default settings are loaded first. Use a FAT 32/16 formatted USB flash drive. Insert the USB drive, navigate to Tool > ASUS EZ Flash 3 Utility in BIOS, select the BIOS file, and follow prompts. Do not shut down or reset during the update.

2.4 ASUS CrashFree BIOS 3

This utility helps restore a corrupted BIOS file. Download the latest BIOS from the ASUS website, rename it (e.g., ASUS.CAP or PB560PS.CAP), and copy it to a USB flash drive. Insert the drive during system boot; the utility will automatically find and use the BIOS file. Load default BIOS values () for stability.

Appendix

Notices

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. It must not cause harmful interference and must accept any received interference. Tested as a Class B digital device, it provides reasonable protection against harmful interference in residential installations. If interference occurs, users are encouraged to reorient the antenna, increase separation, or connect to a different circuit. Consult a dealer or technician for help.

HDMI Compliance Statement

HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks of HDMI Licensing Administrator, Inc.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with ISED license-exempt RSS standard(s) and operates under two conditions: no harmful interference and acceptance of any interference.

VCCI: Japan Compliance Statement Class B ITE

This equipment is Class B ITE. It may cause reception interference in home environments. Follow instructions for proper use.

Japan JATE

This product must not be connected directly to telecommunication carriers' lines. Use a router for internet connection.

KC: Korea Warning Statement

This is a Class B device suitable for home use.

Google™ License Terms

Licensed under the Apache License, Version 2.0. Details available at http://www.apache.org/licenses/LICENSE-2.0.

Declaration of Compliance for Product Environmental Regulation

ASUS adheres to green design principles and global environmental regulations. Information on compliance is available at http://csr.asus.com/Compliance.htm.

• EU REACH and Article 33: Compliance with REACH framework. Chemical substances listed at http://csr.asus.com/english/REACH.htm.
• EU RoHS: Complies with EU RoHS Directive. Details at http://csr.asus.com/english/article.aspx?id=35.
• India RoHS: Complies with India E-Waste (Management) Rules, 2016, prohibiting certain hazardous substances above specified limits.
• Vietnam RoHS: Meets requirements of Vietnam Circular 30/2011/TT-BCT for products sold after September 23, 2011.
• Turkey RoHS: Complies with AEEE Yönetmeliği.

ASUS Recycling/Takeback Services

ASUS is committed to environmental protection through recycling programs. Details at http://csr.asus.com/english/Takeback.htm. Do not dispose of the motherboard in municipal waste. Do not dispose of mercury-containing button cell batteries in municipal waste.

Regional Notice for California

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

EU Declaration of Conformity

ASUSTeK Computer Inc. declares that this device complies with essential requirements and relevant provisions of related EU Directives. Full text available at www.asus.com/support.

Warranty

ASUS offers a voluntary manufacturer's Commercial Guarantee, independent of and in addition to the statutory Legal Guarantee. ASUS reserves the right to interpret warranty provisions. For complete warranty information, visit the ASUS support website for your region.

ASUS Contact Information

ASUSTeK COMPUTER INC.

• Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan
• Telephone: +886-2-2894-3447
• Fax: +886-2-2890-7798
• Web site: https://www.asus.com
• Technical Support Telephone: +86-21-38429911
• Online support: https://qr.asus.com/techserv

ASUS COMPUTER INTERNATIONAL (America)

• Address: 48720 Kato Rd., Fremont, CA 94538, USA
• Telephone: +1-510-739-3777
• Fax: +1-510-608-4555
• Web site: https://www.asus.com/us/
• Technical Support Telephone: +1-812-284-0883
• Online support: https://qr.asus.com/techserv

ASUS COMPUTER GmbH (Germany and Austria)

• Address: Harkortstrasse 21-23, 40880 Ratingen, Germany
• Web site: https://www.asus.com/de
• Online contact: https://www.asus.com/support/Product/ContactUs/Services/questionform/?lang=de-de
• Technical Support Telephone (DE): +49-2102-5789557
• Technical Support Telephone (AT): +43-1360-2775461
• Online support: https://www.asus.com/de/support