User Manual for LUXPRO models including: LP323 Multi Color LED Headlamp, LP323, Multi Color LED Headlamp, LED Headlamp, Multi Headlamp, Headlamp
User Manuals – LUXPRO
User Manuals | LUXPRO Product Guides & Instructions
USER MANUAL LP323 Multi-color LED Headlamp 3 AAA Batteries Operation Instructions Spot On/O & Cycle Modes: Press and release the button on the right of the headlamp to turn spotlight on. Press button repeatedly to cycle through modes (Spot High/Spot Low). High+ Mode: Press and hold the right button for 2 seconds to turn on High+ Mode. Features Durable ABS and rubberized compact design LPE optics, Multi-color COB LED area light Dual button intuitive mode selection Non-slip adjustable headband IPX4 waterproof rating Batteries included (3 AAA) Product Warranty The LP323 has a Limited 1-Year Warranty Against Manufacturer's Defects from time of purchase. For warranty claims please contact us by calling 801-553-8886 or sending an email to info@simpleproducts.com ANSI/PLATO FL1 STANDARD MODES High+ High Spot Low Spot High White Low White Green Red LUMENS RUN TIME Spot Modes 300 lm 3h 220 lm 4h 50 lm 6h Flood Modes 85 lm 5h 30m 34 lm 8h 30m 51 lm 7h 30m 15 lm 3h BEAM DISTANCE 85m 40m 20m 20m 5m 5m 1m Flood On/O & Cycle Modes: Press and release the button on the left of the headlamp to turn ood light on. Press button repeatedly to cycle through modes (High White/LowWhite/Green/Red). Strobe: From any mode, press and hold the left button for 2 seconds to switch to Strobe mode. Battery Replacement The LP323 uses 3 AAA batteries. To replace the batteries, rst locate the two plastic tabs on the sides of the headlamp. Gently push tabs outward using both thumbs to separate the battery cover from the main headlamp housing. Remove the old batteries and insert new batteries according to the (+/-) symbols in the battery tubes. For best results, we recommend using brand new alkaline batteries that are the same voltage and brand. To re-attach the battery cover, line the plastic tabs on the main housing up to the battery cover taking note to match them in proper orientation (the LUXPRO logo on the battery cover should line up with the On/O buttons on the main housing). Gently press the two sides together until they click into place. Check that the battery cover is secured by gently tugging on the headlamp straps while holding the main housing rm. If you know it will be a while between uses, we suggest removing the batteries from the head lamp and storing it in a dry, protected place. luxpro.com 14725 S Porter Rockwell Blvd Ste C 866.553.8886 Bluffdale, UT 84065Adobe PDF library 15.00 Adobe Illustrator 25.3 (Windows)