Duravent Group
Selkirk
Instruction Manual for duravent models including: 3VP-60B, 3VP-60, 3VP-36B, 3VP-36, 3VP-24, 3VP-12, 3VP-6, 3VP-EZAJ12B, 3VP-EZAJ12, 244060B, 244060, 244036B, 244036, 244024, 244012, 244006, 244086B, 244086, 3VP-60B Pellet Vent Catalog, Pellet Vent Catalog, Vent Catalog, Catalog
File Info : application/pdf, 12 Pages, 1.83MB
DocumentDocumentPellet Vent Catalog FUEL TYPE: Wood Pellets US ONLY TABLE OF CONTENTS Typical VP Pellet Pipe Installations .............................................................................................. 3 Pellet Pipe Lengths .................................................................................................................... 4 Pellet Pipe Tees and Elbows ....................................................................................................... 5 Pellet Pipe Supports .................................................................................................................. 6 Pellet Pipe Kits ......................................................................................................................... 7 Rain Caps and Collars.............................................................................................................. 8 Pellet Pipe Flashings ................................................................................................................. 9 Pellet Pipe Shields ................................................................................................................9-10 Pellet Pipe Accessories........................................................................................................10-11 2 Selkirk by Duravent | www.selkirkcorp.com MINIMUM CLEARANCE TO COMBUSTIBLES Selkirk® VP Pellet PipeTM may be installed with a minimum 1" airspace clearance to combustible surfaces, such as framing lumber, drywall, plywood, or other building materials. VP Pellet PipeTM may be exposed in occupied areas and painted pipe lengths help make your venting system an attractive accent to your interior decor. However, your venting system should be enclosed whenever it passes through closets, storage rooms, or accessible attics to ensure that the minimum 1" airspace clearance is maintained. This is particularly true in attics where cellulose-type or other blown-in Insulation materials could settle against the exposed vent pipe. It is also advisable to provide an enclosed chase for exterior vent systems to aid in reducing condensation and to protect the pipe from cold outdoor temperatures. VP Pellet PipeTM features a proven joint design that allows for easy assembly. Special rope gaskets incorporated into the joint reduce leakage and help to minimize any accumulation of combustion powder residues. In addition, VP Pellet PipeTM is listed for use with an optional, high-temperature silicon sealant which enhances the integrity of the joint assembly. Selkirk® is the world's leading manufacturer of venting and air distribution products for residential, commercial, and industrial use. VP Pellet PipeTM vent for pellet stoves is just one of the family of fine products sold worldwide. Selkirk® it's a name you can rely on. TYPICAL VP PELLET PIPE INSTALLATIONS The following illustrations show the most common types of Model VP installations and the variety of parts required. Horizontal Exit Termination Through the Ceiling Rear Vent Note: Always follow appliance manufacturers instructions for minimum vertical requirements. Through the Wall Installation EXIT CAP B FT. Through the Wall Rear Vent B FT. 800.992.8368 | Selkirk by Duravent 3 VP Pellet PipeTM Selkirk® gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641, CAN/ULC-S609 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. VP Pellet Pipe, when installed according to Selkirk's installation instructions, complies with National Safety Standards, such as NFPA -211 in the US and CSA/B365 in Canada. The system is rated for flue temperatures up to 570°F. · Available in 3" and 4" diameters. · Full line of fittings and full range of pipe lengths increase installation flexibility. · Proven coupling joint connects in seconds to assure joint integrity. · Gasketed joint design. · Painted pipe lengths available for interior use. · Double wall design with ¼" airspace. · Inner wall 304 stainless steel, outer wall paintable galvanized. · Rolled-over male end eliminates sharp edges. · 1" clearance to combustibles. Clearances in Canada is 3". · Removable tee cap for inspection and cleaning. · Internal spacing bead assures uniform insulating airspace between pipe walls. VENT PIPE AND ADJUSTABLE PIPE LENGTHS VP VP VP-EZADJ VP-EZADJ I.D.: 3", 4" Lengths: 6", 1', 2', 3', 5' VP pipe & fittings overlap 1-½" when joined hence, net assembled length is 1-½" less than listed lengths (3' and 5' lengths available in black) I.D.: 3", 4" Max. installed length 10-½" Adjusts to 8" shorter (Black or Unpainted) Pellet Pipe Lengths Pellet Pipe Lengths · Available in lengths of 5', 3', 2', 12" and 6". · Available in galvanized and black. Adjustable Pipe Length · Adjustable length eliminates the need to cut pipe. · Adjustable length simply slides over another VP length. 3"Diameter 4"Diameter Item Description Product No. Part No. Product No. Part No. 5' Length Black 243060B 3VP-60B 244060B 4VP-60B 5' Length 243060 3VP-60 244060 4VP-60 3' Length Black 243036B 3VP-36B 244036B 4VP-36B 3' Length 243036 3VP-36 244036 4VP-36 2' Length 243024 3VP-24 244024 4VP-24 12" Length 243012 3VP-12 244012 4VP-12 6" Length 243006 3VP-6 244006 4VP-6 12" EZ Adj. Black 243086B 3VP-EZAJ12B 244086B 4VP-EZAJ12B 12" EZ Adj. 243086 3VP-EZAJ12 244086 4VP-EZAJ12 4 Selkirk by Duravent | www.selkirkcorp.com Pellet Pipe Tees & Elbows Tee · Used to transition from horizontal to vertical orientation. · Provides easy access for inspection and maintenance. · Includes Tee Cap. Double Tee · Provides access to clean horizontal portion of chimney system. · Includes 2 Tee Caps. 3"Diameter Item Description Product No. Tee w/Tee Cap Black 243100B Tee w/Tee Cap 243100 Double Tee w/2 Caps 243103 Increaser Tee Increaser Tee Black Tee Cap Part No. 3VP-TSB 3VP-TS 3VP-TD 3VP-TC 4"Diameter Product No. 244100B 244100 244104 244113 244113B Part No. 4VP-TSB 4VP-TS 4VP-TD 4VP-3T 4VP-3TB 4VP-TC · Replaces Pipe Connector, 3" - 4" Increaser and 4" Tee. Item Description 4 x 3 Adjustable Tee w/Tee Cap 4"Diameter Product No. Part No. 244133B 4VP-3AT · Used to orient pipe between vertical and horizontal orientation. · Factory sealed at couplers to prevent leakage. 3"Diameter 4"Diameter Item Description Product No. Part No. Product No. Part No. 90° Elbow Black 90° Elbow 243231B 243230 3VP-90°ELB 3VP-90°EL 244230B 244231 4VP-90°ELB 4VP-90°EL · Used to offset pipe around construction obstacles. · Factory sealed at couplers to prevent leakage. 3"Diameter 4"Diameter Item Description 45° Elbow Black 45° Elbow Product No. 243216B 243215 Part No. 3VP-45°ELB 3VP-45°EL Product No. 244215B 244216 Part No. 4VP-45°ELB 4VP-45°EL TEES AND DOUBLE TEES W/ TEE CAP VP-TS 4VP-3T VP-TS VP-TD I.D.: 3" A=9" B=4 ½" 4" A=10" B=5" VP-TD I.D.: 3" A=9" B=4 ½" 4" A=10" B=5" 4 X 3 ADJUSTABLE TEE W/TEE CAP 3 ¾" 4VP-3AT 3 ¹/16" 5" 10" +" ¼" - 0" 2 " 90º ELBOW TRUE 3" 3 ½" VP-90EL 45° ELBOW I.D.: 3" A=5 13/16" 4" A=6 7/16" (Black OR Unpainted) I.D.: 3" A=3 7/16" 4" A=3 3/4" (Black OR Unpainted) 800.992.8368 | Selkirk by Duravent 5 CEILING SUPPORT / FIRESTOP VP-CS I.D.: 3" A=3 5/8, B=12 ½", C=9 ½" 4" A=4 5/8, B=12 ½", C=10 ½" WALL BRACKET / SUPPORT VP-WB I.D.: 3", 4" TEE SUPPORT VP-WS I.D.: 3", 4" CATHEDRAL CEILING SUPPORT 10.625" 14" 10.625" Pellet Pipe Supports · Used to support pipe from the ceiling joist. · Maintains clearance to combustibles. 3"Diameter Item Description Ceiling Support/ Firestop Product No. 243410 Part No. 3VP-CS 4"Diameter Product No. Part No. 244410 4VP-CS · Designed to provide both lateral and vertical support for vent pipe when installed adjacent to a wall. · Can be used to stabilize the pipe against an outside wall. · Install on first pipe length above a Tee if optional Tee Support is not used. · Maintains 3" clearance to combustibles. 3"Diameter Item Description Wall Bracket/ Support Product No. 243520 Part No. 3VP-WB 4"Diameter Product No. Part No. 244520 4VP-WB · Two plates used to stabilize and support the Tee. Item Description Tee Support 3" / 4"Diameter Product No. Part No. 243430 3/4VP-WS · Used in cathedral-style installations. · Painted black for decorative finish. · Includes a two-part square black Trim Plate. · Includes a Support Band. 3"Diameter Item Description Cathedral Ceiling Support Product No. 243424 Part No. 3VP-CCS 4"Diameter Product No. Part No. 244424 4VP-CCS 6 Selkirk by Duravent | www.selkirkcorp.com Pellet Pipe Kits 4" Pellet Pipe Flex Kit has the 4" Pellet Pipe Flex Kit has the following: following: · 25' of 4" Diameter Stainless Flex · 35' of 4" Diameter Stainless Flex · 4" Flex Termination · 4" Flex Termination · 4" Flex Flashing Adapter · 4" Flex Flashing Adapter · 4" Flex Flashing · 4" Flex Flashing · 3 - 4" Increaser · 3 - 4" Increaser · 3" Pipe Connector · 3" Pipe Connector · Silicone sealant · Silicone sealant · 4" Pull Down Tool · 4" Pull Down Tool · 4" Flex to Pellet Pipe Adapter · 4" Flex to Pellet Pipe Adapter PELLET PIPE INSERT (FLEX) KITS Product No. 284855 Part No. 4VP-25IK Product No. 284865 Part No. 4VP-35IK The 3VP Thru-the-Wall Pellet Kit has the following: · 1 - 3" Horizontal Cap · 1 - 3" 90° Elbow · 1 - 3" Wall Bracket · 5 - 3" One-foot Pipe Lengths · 1 - 3" Tee with Cleanout · 1 - 3" Wall Thimble · 1 - 3" Pipe Connector · 1 - 3" Tee Support Product No. 283870 284875 Part No. 3VP-KIT 3/4VP-KIT The 3/4VP Thru-the-Wall Pellet Kit has the following: · 1 - 4" Horizontal Cap · 1 - 4" 90° Elbow · 1 - 4" Wall Bracket · 5 - 4" One-foot Pipe Lengths · 1 - 4" Tee with Cleanout · 1 - 4" Wall Thimble · 1 - 4" Tee Support · 1 - 3" to 4" Increaser · 1 - 4" Pipe Connector · 1 - 3" Pipe Connector THRU-THE-WALL PELLET STOVE KITS 800.992.8368 | Selkirk by Duravent 7 STORM COLLAR VP-SC Sizes: 3" A=3 5/8" 4" A=4 5/8" HORIZONTAL AND VERTICAL TERMINATIONS VP-HC I.D.: 3" A=8" B=3 9/16" 4" A=8" B=4 9/16" VP-VC I.D.: 3" A=6" B=3 ¼" 4" A=8" B=4 ¼" EXIT CAP AND SCREENS Horizontal Termination (VP-HC) OR Exit Cap (VP-EC) Outlet Screen (Pins not required) Rain Caps and Collars · Used to provide a weather proof seal to pipe above roof flashing. · Seal inner edge with hi-temp silicone sealant. 3"Diameter Item Description Product No. Part No. Storm Collar 243810 3VP-SC 4"Diameter Product No. Part No. 244810 4VP-SC · Vent Termination for horizontal (thru-the-wall) installations. · Vent Termination for vertical (thru-the-roof) installations. · Designed to prevent rain & snow from entering the pipe. 3"Diameter Item Description Product No. Part No. 4"Diameter Product No. Part No. Vertical Termination 243800 3VP-VC 244800 4VP-VC Horizontal Termination 243805 3VP-HC 244805 4VP-HC · Used with Horizontal installations. Item Description 3" Exit Cap 4" Exit Cap Outlet Screen Product No. 243803 244803 1604790 Part No. 3VP-EC 4VP-EC 4DT-VPOS 8 Selkirk by Duravent | www.selkirkcorp.com Pellet Pipe Flashings · Used to waterproof installations through a flat roof. 3"Diameter Item Description Product No. Part No. Tall Cone Flashing 243815 3VP-TF 4"Diameter Product No. Part No. 244815 4VP-TF TALL CONE FLASHING VP-TF I.D.: 3", 4" · Used to waterproof installations that penetrate the roof line. 3"Diameter Item Description Product No. Part No. Adj. Flashing 243825 3VP-AF 4"Diameter Product No. Part No. 244825 4VP-AF Pellet Pipe Shields · The attic insulation shield is required to guard against the hazard of blown in or blanket insulation occupying the required 1" air space around the vent. 3"Diameter Item Description Product No. Part No. Attic Insulation Shield 243490 3VP-AIS 4"Diameter Product No. Part No. 244490 4VP-AIS ADJUSTABLE FLASHING VP-AF (0-6/12) I.D.: 3" A=11 ¼" x 13 5/8" 4" A=13" x 15 ½" ATTIC INSULATION SHIELD B C A 10 in. D A Detail A I.D.: 3" A=7 ½" B=5 ½" C=3 5/8" D=5 ½" 4" A=8 ½" B=6 ½" C=4 5/8" D=6 ½" · Used in Thru-the-Wall installations. · Maintains airspace clearance. · Centers pipe between walls. · Telescopic design can be used on standard walls - WT: 4" - 7" WTT: 6.5" - 11.5" 3"Diameter Item Description Product No. Wall Thimble 243460 Wall Thimble, Thick 243461 Part No. 3VP-WT 3VP-WTT 4"Diameter Product No. 244460 244461 Part No. 4VP-WT 4VP-WTT WALL THIMBLE VP-WT I.D.: 3" A=3 5/8" 4" A=4 5/8" 800.992.8368 | Selkirk by Duravent 9 Pellet Pipe Shields continued TRIM PLATE AND EXTERIOR SHIELD · Used to seal Thru-the-Wall installations. · Trim Plate painted black for decorative finish. · Exterior Shield - Galvanized. I.D.: 3", 4" VP-TP (BLACK) VP-ES (UNPAINTED) 3"Diameter Item Description Product No. Part No. Trim Plate Black Exterior Shield 243502 243500 3VP-TP 3VP-ES 4"Diameter Product No. Part No. 244502 244500 4VP-TP 4VP-ES SELKIRK UNIVERSAL SHIELDING INSULATION (SUSI) 2in (51mm) 12in (305mm) 48in (1220mm) 3" TO 4" INCREASER 1" · Optional Insulation for use with the Cathedral Ceiling Support, Wall Thimble, and Attic Insulation Shield. Item Description Universal Shielding Insulation Product No. Part No. 200001 SUSI Pellet Pipe Accessories · Used to adapt 3" pipe to 4" pipe. Item Description 3" to 4" Increaser Product No. Part No. 243304 3VP-I4 PIPE CONNECTOR I.D.: 3", 4" · For connection to appliance outlet collar. 3"Diameter 4"Diameter Item Description Product No. Part No. Product No. Part No. Pipe Connector 243240 3VP-PC 244240 4VP-PC Pipe Connector Black 243240B 3VP-PCB Multi-Fit Connector 243241 3VP-MFC Adjustable Pipe Connector 243243 3VP-APC 244243 4VP-APC ADJUSTABLE PIPE CONNECTOR · Used to accommodate wider range of 3" or 4" flue collar variances for better fit. Sizes: A B 3VP 3 ½" 3" 4VP 4 ½" 4" C D 1" ¼" 1" ¼" 10 Selkirk by Duravent | www.selkirkcorp.com 3"Diameter Item Description Adjustable Pipe Connector Product No. 243243 Part No. 3VP-APC 4"Diameter Product No. Part No. 244243 4VP-APC Pellet Pipe Accessories continued · Connects 3" flue collar to 4" VP parts. Item Description Multi-Fit Connector Product No. Part No. 243241 3VP-MFC MULTI-FIT CONNECTOR OD 3 1/4" 3 1/4" ID 4 1/16" ID 4 1/2" · Used on appliances with a thicker flue outlet collar. 3"Diameter Item Description Thick Collar Pipe Connector Product No. 243242 Part No. 3VP-TPC 4"Diameter Product No. Part No. 244242 4VP-TPC THICK COLLAR PIPE CONNECTOR VP-TPC Sizes: A B 3" 3 7/8" 2 7/8" 4" 4 7/8" 3 7/8" · Used to transition VP Pellet Pipe to Ultra-Temp Chimney. 3"Diameter Item Description Product No. 6" Chimney Adapter 243246 8" Chimney Adapter 243248 Part No. 3VP-A6 3VP-A8 4"Diameter Product No. 244246 244248 Part No. 4VP-A6 4VP-A8 CHIMNEY ADAPTER VP-A6, A8 I.D.: 3", 4" · Safely remove ash with no mess. · Eliminates need to remove tee cap to clean pipe. · Available for 3" or 4" Pellet Pipe Tees. 3"Diameter Item Description Product No. Vacuum Cleanout Cap 243185 Tee Cap 243180 Part No. 3VP-VCC 3VP-TC 4"Diameter Product No. 244185 244180 Part No. 4VP-VCC 4VP-TC VACUUM CLEANOUT CAP Installs on base of Tee and replaces Tee Cap. Tee sold separately. Tee Cap 800.992.8368 | Selkirk by Duravent 11 © 2023 Duravent Group. All rights reserved. SK_VPP_CT-001-US-E_05-23 www.duraventgroup.com