Service Bulletin B1180047A-07
Subject: SB, Firmware Update m/2019, Automower® 105, Gardena R38Li, R40Li, R45i, R50Li, R70Li, R80Li, McCulloch ROB R600, ROB R800, ROB R1000, Flymo 1200R, 2018-12
Action Required
[ ] Sold
[ ] Not Sold
[X] Information only
[ ] Only if the problem is encountered
Affected Models
| Model | PNC | Serial Number Range | |
|---|---|---|---|
| Start | End | ||
| Automower® 105 | 160100001 | 184999999 | |
| Gardena R38Li | 160100001 | 184999999 | |
| Gardena R40Li | 160100001 | 184999999 | |
| Gardena R45Li | 160100001 | 184999999 | |
| Gardena R50Li | 160100001 | 184999999 | |
| Gardena R70Li | 160100001 | 184999999 | |
| Gardena R80Li | 160100001 | 184999999 | |
| McCulloch ROB R600 | 160100001 | 184999999 | |
| McCulloch ROB R800 | 160100001 | 184999999 | |
| McCulloch ROB R1000 | 160100001 | 184999999 | |
| McCulloch Flymo 1200R | 160100001 | 194599999 | |
Market(s) Concerned
All.
Description
A new firmware is available: firmware pack 5825856-08A. The firmware pack includes the following modifications:
- Enhanced foot detection (added for compliance with upcoming iterations of EN 50636-2-107 robotics regulation):
- Added enhanced functionality to identify if the mower passes over a foot or other similar objects when reversing.
- When an object is identified, the product stops the cutting motor and attempts to move away from the object.
- Once the mower has moved away from the object, it resumes mowing after 25 seconds.
- Several minor firmware improvements (not described in detail in this SB).
Dealer Recommendations
Dealers are invited to update the software:
- As a normal PDI step before selling a new product
- In case of customer complaint regarding one of the problems described above
- Later, during the next service.
Revision History
| Rev. | Date | Command ID | Description |
|---|---|---|---|
| A | 2018-12 | SB-3673 |
