Redmi Note 13 Safety Information

Safety Information and Regulatory Compliance

Model Information

Model: 23124RA7EO

This product was launched after December 2023.

EU Regulations

RED Declaration of Conformity

Xiaomi Communications Co., Ltd. declares that this GSM / GPRS / EDGE / UMTS / LTE Digital Mobile Phone with Bluetooth and Wi-Fi 23124RA7EO complies with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.mi.com/en/certification

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU). During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure during use against the head with no separation and near the body with a separation of 5 mm. SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body. This device should be carried at least 5 mm away from the body to ensure RF exposure level is compliant or lower than the reported level. When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components and allows a separation of at least 5 mm to be maintained between the device and the body. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided.

Certification Information (Highest SAR)

SAR 10 g limit: 2.0 W/Kg, SAR Value: Head: 0.770 W/Kg, Body: 0.978 W/Kg (5 mm distance).

Frequency Bands and Power

This mobile phone offers the following frequency bands in EU areas only and maximum radiofrequency power:

FCC Regulations

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

RF Exposure Information (SAR)

This device meets the government's requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.0 cm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of such body-worn accessory should be avoided. Any accessory used with this device for body-worn operation must keep the device a minimum of 1.0 cm away from the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

E-label

This device has an electronic label for certification information. To access it, please go to Settings > About phone > Certification, or open Settings and type "Certification" into the search bar.

Instructions for Factory reset

Path: Settings > About phone > Factory reset. You can quickly erase the local data on the device via "Factory reset". Data to be erased includes: Accounts, Contacts, Photos and videos, Apps, Backups, SD card data and Other items on this device.

Safety Precautions

Legal Information

This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in : AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU,IE,IT,LV,LT,LU,MT,NL,PL, PT,RO,SK,SI,ES,SE,UK(NI),IS,LI,NO,CH,TR

Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards and other features as ratified in IEEE Standard 802.11 specifications) may vary based on regional availability and local network support. The function may be added via OTA when and where applicable.

Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Please ensure the used power adapters are compliant with applicable country regulations and international and regional safety standards.

Models: Redmi Note 13 Smartphone, Redmi Note 13, Smartphone

PDF preview unavailable. Download the PDF instead.

N7N SI 欧规14语版 20240119 网页版 Adobe PDF Library 16.0.7

Related Documents

Preview Redmi Note 12 Pro+ 5G Safety Information and Compliance
Official safety information, EU and FCC compliance details, SAR values, frequency bands, and power specifications for the Redmi Note 12 Pro+ 5G smartphone.
Preview Redmi Note 14 Pro+ 5G Safety Information and Compliance
Comprehensive safety information, EU and FCC compliance details, SAR information, and operating precautions for the Redmi Note 14 Pro+ 5G smartphone.
Preview Redmi Note 14 Pro 5G Safety Information and Regulatory Compliance
Comprehensive safety information and regulatory compliance details for the Redmi Note 14 Pro 5G mobile phone, including SAR values, frequency bands, FCC regulations, and usage precautions.
Preview Xiaomi Redmi Note 13 Pro 5G Quick Start Guide
A concise guide to setting up and using the Xiaomi Redmi Note 13 Pro 5G, covering essential safety information, regulatory compliance, and device specifications.
Preview Redmi Note 14S Safety Information
Essential safety, regulatory, and RF exposure information for the Redmi Note 14S smartphone, covering EU and FCC compliance, SAR values, and safe usage guidelines.
Preview Redmi Note 13 Quick Start Guide - Safety and Regulatory Information
This is a quick start guide for the Redmi Note 13 smartphone by Xiaomi. It provides essential setup information, detailed safety precautions, regulatory compliance details for EU, UK, and FCC, frequency band information, and SAR values.
Preview Redmi Note 14 Pro Safety Information and Compliance Details
Comprehensive safety information, EU and FCC compliance details, SAR values, charging instructions, and usage guidelines for the Redmi Note 14 Pro smartphone, presented in an accessible HTML format.
Preview Redmi Note 14 5G Safety Information and Compliance
Comprehensive safety guidelines, RF exposure information (SAR), regulatory compliance (EU, FCC), and precautions for the Redmi Note 14 5G mobile phone.