Divoom Ditoo User Manual

Welcome

Thank you for purchasing the Divoom Ditoo, your best desktop accessory from Divoom. With Ditoo, you can create pixel art design and interact with the largest pixel art community, as well as enjoy the good tune from our speaker. Along with the companion application-Divoom Smart, Ditoo is capable of many daily functions, and learn more through software updates.

What's Included?

• Ditoo
• User manual
• USB Type-C charging cable

Thank you for purchasing a Divoom product! Please read this manual carefully. You can also visit www.divoom.com to learn more about other products.

Due to the nature of the technology product, the information on this manual is subject to change without prior notice. If you have any questions, please contact the Divoom customer support.

Product Details

The Ditoo device features several buttons and indicators:

• 1. [M button]: Press to Enter/Exit menu functions. Hold to Turn ON/OFF keyboard backlight.
• 2. [+] button: Press/Hold to Increase volume.
• 3. [Lighting button]: Press to Change lighting function. Hold to Change lighting effects.
• 4. [Previous track button]: Press for Previous track. Hold to Decrease brightness.
• 5. [-] button: Press/Hold to Decrease volume.
• 6. [Next track button]: Press for Next track. Hold to Increase brightness.
• 7. Lever: Pull to Play/Pause/Answer/End Call. Hold for Active voice memo/Reject Call.
• 8. Charging indicator: Indicates charging status.
• 9. TF card slot: For inserting TF cards.
• 10. Power button: Press to Show battery status. Press twice to Disconnect Bluetooth connection. Hold to Power ON/OFF.
• 11. USB Type-C Charging port: For charging the device.

Device Layout Description: The front of the device features a pixel display and speaker grille. Below the display are buttons labeled 'm', '+', ':', '-', and a lever. The side/bottom of the device shows a TF card slot, a USB Type-C charging port, and a power button, along with a charging indicator.

How to Operate Ditoo On-Screen Menu

1. Press the [M button] to activate the menu system.
2. Press the [+] or [-] buttons to switch between Audio, Game, Alarm, Tools, and Draw menus.
3. Pull the lever to confirm selection and enter the menu. Press the [M button] to exit the current menu.

Audio Mode

In Audio mode, rotate between Bluetooth and SD card options. Pull the lever to confirm selection, then use the control buttons (play/pause, volume, track change) to manage audio playback.

Game Mode

Choose from games like Tetris, Slot machine, Dice, Magic 8/Blocks, Flap bird, Snake, and Racing. Use the [+] or [-] buttons to switch games, and pull the lever to confirm selection. Press the [M button] to exit.

Alarm Mode

In Alarm mode, press [+] or [-] to change the time value, and pull the lever to confirm and activate the alarm. Press the [M button] to delete and exit the menu. For more alarm options, use the mobile app.

Tools Mode

In Tools mode, choose between Scoreboard, Stopwatch, Noise meter, and Timer alert. Use the [+] or [-] buttons to switch tools, and pull the lever to confirm selection. Press the [M button] to exit.

Draw Mode

In Draws mode, pull the lever to activate the Draw function. Use the [+] or [-] buttons to switch designs and pull the lever to confirm selection. Use the [+] or [-] buttons to move the cursor, and pull the lever to fill in the color in the grids. Press the lighting button to review the design hint, or press the [M button] to exit.

How to Connect the Speaker?

Download Mobile Application

Search for the 'Divoom' application for both iOS and Android systems. Please grant all privilege requests prompted by the APP.

For Apple iOS system: Search and connect the 'Ditoo-audio' in Bluetooth settings, then search and connect the 'Ditoo-light' in the Divoom Smart APP.

For Android system: Search and connect the 'Ditoo-light' or 'Ditoo-audio' in the APP or Settings.

Pairing Description: The app interface shows options to connect to 'Ditoo-audio' or 'Ditoo-light'. For Android, a pairing request may appear asking for access to contacts and call history, with options to 'Cancel' or 'Pair'.

How to Record a Voice Memo (Up to 60 Seconds)?

1. Pull and hold the lever for 3 seconds to start recording a voice memo.
2. Pull the lever to end the recording.
3. Pull the lever again to play the voice memo.

*The message will be erased after being played.

Recording Process Description: The device display shows a microphone icon during recording. After recording, it shows a playback icon. The process involves holding the lever to record, pulling it to stop, and pulling it again to play.

How to Setup a Manual Alarm?

1. Press the [M button] and switch to the alarm setting menu.
2. Pull the lever to confirm and enter alarm settings.
3. Press [+] or [-] to change the time value, pull the lever to confirm settings.
4. Pull the lever to confirm/activate the alarm. To delete an alarm, pull and hold the lever.

*Only one manual alarm is available. For more alarm options, please use the mobile APP.

Alarm Setup Description: The device display shows clock icons and numbers. The process involves navigating to the alarm menu, setting the time using buttons and lever, and confirming activation.

How to Play the TF Card Audio?

1. Insert the TF card; the audio should start to play automatically.
2. Press the [M button], and pull the lever to select the audio option.
3. Switch to the 'SD card' option, and pull the lever to confirm selection.
4. Play the audio via the control panels (play/pause/volumes/change songs).

* MP3 is the only supported file format. The maximum supported capacity is 64GB.

TF Card Usage Description: The device has a dedicated TF card slot. A diagram shows a TF card labeled '64G' being inserted into the slot.

How to Charge?

1. Insert the USB Type-C cable into the speaker.
2. Press the power button if you want to check the battery percentage.
3. When charging, the indicator light will be lit. Upon 100% charged, the indicator will turn off.

*Please use a 5V-2A charger, and do not use a higher voltage charger.

Charging Description: The device has a USB Type-C charging port. A charging indicator light is present. The diagram shows the USB-C cable connected to the port.

Product Specification

• Dimension (mm): 90 x 113.8 x 121.2
• Weight: 505g
• Speaker size: 45mm
• Output power: 10W
• Frequency response: 80-20KHz
• Signal-to-noise ratio: 80dB
• Playback time: 8hrs
• Battery capacity: 3000mAh
• Battery voltage: 3.7V
• Battery charge time: 4hrs
• Charge: 5V-2A
• Wireless range: 10M/33ft
• Bluetooth compliant: 5.0

Safety Guide

Please read the following instructions carefully:

• Follow product installation and operation instructions.
• Always place the speaker on a smooth and stable surface.
• Place the speaker in an open area for the best sound quality; do not block surroundings.
• Do not push objects into speaker vents or slots; do not apply great force.
• Keep the speaker in a room temperature environment. Do not place near heat sources (radiators, heat registers, stoves, fire place, direct sunlight) or open flame sources.
• Do not attempt to service the speaker yourself; refer to qualified service personnel.
• To avoid electrical hazard, do not expose the speaker to wet surfaces.

Declarations and Compliance

Declaration of Conformity

CE: This device meets the essential requirements of Directive 2014/53/EU of the European Parliament and Council (16 April 2014).

Waste Disposal: The waste container symbol [Waste disposal symbol] (a bin with an X through it) on the device indicates it must be disposed of separately from domestic waste at an appropriate facility. Dispose of used batteries properly following local regulations; do NOT incinerate. Removal of the rechargeable lithium-ion battery should be done by a qualified professional.

ROHS: This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council (8 June 2011) regarding the restriction of hazardous substances in electrical and electronic equipment.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, users are encouraged to try correcting it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment into an outlet on a circuit different from the receiver's. Consult a dealer or experienced radio/TV technician for help.

Product Warranty Card

Divoom Official Website: www.divoom.com

Divoom Warranty Information: www.divoom.com/article/detail/id/60.html

Divoom Product FAQ: www.divoom.com/article/detail/id/59.html

Divoom Support Email: info@divoom.com

Divoom Support Contact Number: 0755-29494509

Divoom Repair & Return Address: Shenzhen Divoom Technology Limited Corporation, 1st Floor, 5th Building, XinLianHe Industrial Complex, Shajing Town, Baoan District, Shenzhen City, Guangdong Province, 518000, The People's Republic of China.

Warranty Information

1. If the product is defective within the warranty period, bring it back to the place of purchase or contact customer support.
2. Within 12 (or 24, if required by local law) months of purchase, Divoom will repair or replace defective parts free of charge for labor or materials, provided the defect is due to faulty workmanship or materials.
3. A sales invoice or receipt with the date and source of purchase must be presented.
4. Warranty does not cover failures caused by use of non-Divoom accessories or peripheral devices.
5. Warranty does not cover failures caused by modification, unauthorized repair, or disassembly.
6. The warranty is non-transferable.
7. Warranty does not cover damage caused by misuse, drops, impacts, or negligence.
8. Customer is responsible for return shipping charges.

Disposal Note: Please dispose of used batteries properly following local regulations. Do NOT incinerate. Battery removal should be conducted by a qualified professional.

This product is covered by a limited warranty from Divoom. For complete warranty details, visit the website.

This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.