Manuals+

L(A)B LED Facial Mask User Guide

Clinically Tested Light Therapy

About L(A)B

L(A)B is the creation of Oxford University Scientists and Sisters Lauren, Charlotte and Sophie with the aim to improve the effectiveness of your everyday skincare and healthcare regimes through cutting edge scientific devices that fit easily into your life.

L(A)B is committed to delivering products of the highest innovation and quality from concept to packaging. It is a unique brand, the first British, Family run Electronic Skincare + Healthcare company. L(A)B are the Beauty Tool Experts.

L(A)B LED Facial Mask Overview

LED Light Therapy Facials tailor made to your exact skincare requirements.

Completely wireless and remote controlled light therapy at home. Features a menu of 5 pre-set facials that are self-timing for 10 or 15 minutes.

Combines the benefits of 5 different light wavelengths: Red, Blue, Green, Purple, and Yellow to address aging and skincare concerns.

Visibly reduces the appearance of wrinkles, improves skin tone, elasticity, and luminosity.

The mask features 175 specially designed and positioned LED lights covering the entire face and focusing on key areas showing signs of aging.

It has a lightweight, contoured design with an adjustable headband, making it comfortable to wear while sitting or standing without feeling heavy.

Soft-touch silicone protective eye covers provide a comfortable fit and protect the eyes, allowing users to watch TV while wearing the mask.

Product Features

The L(A)B LED Facial Mask includes the following features:

The remote control features:

Facial Treatments

1. Anti-age Facial

Benefits: Red LED Light + Skincare: Visibly reduces the appearance of lines and wrinkles, tightens pores, and increases skin firmness, elasticity, and bounce back.

  1. Start with clean skin.
  2. Apply a thin layer of serum or cream.
  3. Put the LED Facial Mask on and adjust the headband so the mask fits comfortably.
  4. Press the on/off button on the side of the mask; you will hear a beep and the on/off button will flash green.
  5. Press the remote control button once to start the Anti-age facial; you will hear a beep and the LED lights will glow red.
  6. Relax for 10 minutes. The duration counts down on the digital screen of the remote control.
  7. When the facial is complete, you will hear 2 beeps, and the LED lights and remote control will turn off.
  8. Remove mask.

Usage: Use 3 times per week.

2. Purify Facial

Benefits: Blue LED Light: Refines and reduces oiliness and congestion. Helps to re-surface and hydrate, improving skin clarity for a fresh-faced complexion.

  1. Start with clean skin.
  2. Put the LED Facial Mask on and adjust the headband so the mask fits comfortably.
  3. Press the on/off button on the side of the mask; you will hear a beep and the on/off button will flash green.
  4. Press the remote control button twice to start the Purify facial; you will hear a beep and the LED lights will glow blue.
  5. Relax for 10 minutes. The duration counts down on the digital screen of the remote control.
  6. When the facial is complete, you will hear 2 beeps, and the LED lights and remote control will turn off.

Usage: Use 3 times per week.

3. Radiance Facial

Benefits: Green LED light + Skincare: Improves skin's luminosity and radiance. Helps to even skin tone and reduce imperfections for a youthful glow.

  1. Start with clean skin.
  2. Apply a thin layer of serum or cream.
  3. Put the LED Facial Mask on and adjust the headband so the mask fits comfortably.
  4. Press the on/off button on the side of the mask; you will hear a beep and the on/off button will flash green.
  5. Press the remote control button three times to start the Radiance facial; you will hear a beep and the LED lights will glow green.
  6. Relax for 10 minutes. The duration counts down on the digital screen of the remote control.
  7. When the facial is complete, you will hear 2 beeps, and the LED lights and remote control will turn off.
  8. Remove mask.

Usage: Use 3 times per week.

4. Timeless Facial

Benefits: Combines the benefits of Red and Green LED lights in a tailor-made pre-set LED facial. Reduces the appearance of wrinkles, hydrates, and illuminates the complexion. Helps to even skin tone and reduce discolouration and imperfections for a flawless radiant complexion.

  1. Start with clean skin.
  2. Apply a thin layer of serum or cream.
  3. Put the LED Facial Mask on and adjust the headband so the mask fits comfortably.
  4. Press the on/off button on the side of the mask; you will hear a beep and the on/off button will flash green.
  5. Press the remote control button four times until "Anti-age" and "Radiance" are visible. The LED lights will glow yellow, and the pre-set facial will start.
  6. The treatment sequence is: Yellow Light (Anti-age + Radiance) for 5 minutes, then Red Light (Anti-age) for 5 minutes, then Green Light (Radiance) for 5 minutes.
  7. When the treatment is complete, you will hear 2 beeps, and the LED lights and remote control will turn off.
  8. Remove mask.

Usage: Use 3 times per week.

5. Balance Facial

Benefits: Combines the benefits of Red and Blue LED lights in a tailor-made pre-set LED facial. Reduces the appearance of wrinkles and signs of aging, and balances the complexion by reducing oiliness and dryness. Refines pores and clarity for an even, balanced, and youthful complexion.

  1. Start with clean skin.
  2. Apply a thin layer of serum or cream.
  3. Put the LED Facial Mask on and adjust the headband so the mask fits comfortably.
  4. Press the on/off button on the side of the mask; you will hear a beep and the on/off button will flash green.
  5. Press the remote control button five times until "Anti-age" and "Purify" are visible. The LED lights will glow purple, and the pre-set facial will start.
  6. The treatment sequence is: Purple Light (Anti-age + Purify) for 5 minutes, then Red Light (Anti-age) for 5 minutes, then Blue Light (Purify) for 5 minutes.
  7. When the facial is complete, you will hear 2 beeps, and the LED lights and remote control will turn off.
  8. Remove mask.

Usage: Use 3 times per week.

Charging

Instructions:

  1. Connect the micro-USB cable to the charging port on the mask.
  2. Connect the USB end of the charging cable to a device or adaptor plug.
  3. The on/off button will flash green while charging.
  4. A full charge takes approximately 6 hours.
  5. When fully charged, the on/off button light will glow steady green.
  6. A full charge lasts approximately 100 minutes or 6-10 facial treatments.
  7. When the battery is low and requires charging, the on/off button will flash red.
  8. The remote control battery will last approximately 600 minutes before needing replacement.

The mask features a visible USB Port [USB].

Frequently Asked Questions

1. Will the Lights get hot?
No, they are cool LED lights that do not heat up.
2. Are the lights safe for my eyes?
Yes, they are. They are LED lights, not lasers.
3. Can I do more than one facial after the other?
Yes.
4. Is my mask turned on?
The on/off button will have a green light around it.
5. How often do I need to charge my mask?
Depending on usage, the mask will need charging every 6-10 facials. When the mask is low on battery and requires charging, the on/off button will flash red.
6. Is the mask heavy?
The mask is designed to sit lightly on the face, so you can wear it while sitting up and even watching TV.
7. Can I stop a facial early?
Yes, if you want to stop a facial, you can remove the mask, press the on/off button on the side, and press the remote control button until the screen goes blank.
8. Can I switch between facials?
Yes, when you change between facials, the timer will start again on the remote control screen. You can also carry out different facials throughout the week or at different times of the year to tailor them to your requirements.

Quick Start Guide

  1. When you receive the mask, put it on charge until the on/off button glows a steady green.
  2. Open the battery cover on the remote control, remove the plastic disc from the battery, and close the battery cover, leaving the battery in place.
  3. Try the mask on and adjust the headband until the mask fits comfortably and securely on your face.
  4. When ready to start an LED facial, start with clean skin and choose which facial you would like to use.
  5. Prepare skin with a relevant skincare product, then put on the LED face mask.
  6. Press the on/off button on the side of the mask; you will hear a beep.
  7. Press the remote control button until the required facial has been selected; the name will be shown on the screen.
  8. Relax. The minutes will count down on the screen of the remote control.
  9. When the facial is finished, you will hear 2 beeps, and the LED mask and remote control will turn off.
  10. Remove the LED Facial mask; your treatment is complete.

CAUTIONS: Do not use the LED Facial mask if you suffer from light-sensitive medical conditions, including photo-sensitive epilepsy, if you have sunburned or inflamed skin, or if you are pregnant. Do not stare directly at the LED lights.

To clean, wipe the mask with a clean, damp tissue or cloth and towel dry. Do not submerge in water.

Contact Us

Email: info@lab-lifeandbeauty.com

Telephone: 01722 710 811 (option 3) UK customer services

Website: www.lab-lifeandbeauty.com

Follow us: [Facebook] [Twitter] [Instagram]

Models: C454326, LAB, Life and Beauty

File Info : application/pdf, 14 Pages, 1.62MB

PDF preview unavailable. Download the PDF instead.

C454326 manual1

References

Adobe PDF Library 15.0 Adobe InDesign CC 14.0 (Macintosh)