Schneider Electric XB5AW33B5 Illuminated Pushbutton
Product Data Sheet
Characteristics
Availability: Lieferbar (Available)
Image shows a close-up of a green illuminated pushbutton with a clear lens, mounted on a black base with electrical connections.
Main Characteristics
| Product Series | Harmony XB5 |
| Product or Component Type | Illuminated Pushbutton |
| Device Short Name | XB5 |
| Bezel Material | Plastic |
| Collar Material | Plastic |
| Head Type | Standard |
| Mounting Diameter | 22 mm |
| Sale Per Untouchable Quantity | 1 |
| Head Shape | Round |
| Operator Type | Reset |
| Operator Profile | Green flush, unlabelled |
| Additional Information | With simple lens |
| Contact Block Form and Type | 1 NO + 1 NC (1 Normally Open + 1 Normally Closed) |
| Contact Operation | Slow-break |
| Connections - Terminals | Screw clamp terminals: <= 2 x 1.5 mm² with cable end (conforming to EN/IEC 60947-1) Screw clamp terminals: 1 x 0.22...2 x 2.5 mm² without cable end (conforming to EN/IEC 60947-1) |
| Light Source | Protected LED |
| Lamp Base | With LED module |
| Nominal Supply Voltage [Us,nom] | 24 V AC/DC, 50/60 Hz |
Additional Features
| Height | 42 mm |
| Width | 30 mm |
| Depth | 57 mm |
| Terminal Description (ISO No. 1) | (21-22) NC, (13-14) NO |
| Product Weight | 0.056 kg |
| Resistance to high-pressure washer | 7,000,000 Pa at 55°C, distance: 0.1 m |
| Contact Use | Standard contacts |
| Positive Opening | With positive opening conforming to EN/IEC 60947-5-1 Annex K |
| Operating Travel | 1.5 mm (NC, change of electrical state) 2.6 mm (NO, change of electrical state) 4.3 mm (Total travel) |
| Operating Force | 3.5 N (NC, change of electrical state) 3.8 N |
| Mechanical Lifespan | 10,000,000 cycles |
| Tightening Torque | 0.8-1.2 N.m conforming to EN 60947-1 |
| Screw Head Form | Cross head compatible with Philips No. 1 screwdriver Cross head compatible with Pozidriv screwdriver No. 1 screwdriver Slotted head compatible with flat Ø 4 mm screwdriver Slotted head compatible with flat Ø 5.5 mm screwdriver |
| Contact Material | Silver alloy (Ag/Ni) |
| Short-circuit Protection | 10 A cartridge fuse type gG conforming to EN/IEC 60947-5-1 |
| Conventional Free Air Thermal Current (Ith) | 10 A conforming to EN/IEC 60947-5-1 |
| Rated Insulation Voltage Ui | 600 V (Pollution degree: 3) conforming to EN/IEC 60947-1 |
| Rated Impulse Withstand Voltage [Uimp] | 6 kV conforming to EN/IEC 60947-1 |
| Rated Operational Current le | 3 A at 240 V, AC-15, A600 conforming to EN/IEC 60947-5-1 6 A at 120 V, AC-15, A600 conforming to EN/IEC 60947-5-1 0.1 A at 600 V, DC-13, Q600 conforming to EN/IEC 60947-5-1 0.27 A at 250 V, DC-13, Q600 conforming to EN/IEC 60947-5-1 0.55 A at 125 V, DC-13, Q600 conforming to EN/IEC 60947-5-1 1.2 A at 600 V, AC-15, A600 conforming to EN/IEC 60947-5-1 |
| Electrical Lifespan | 1,000,000 cycles, AC-15, 2 A at 230 V, operating rate: <= 3600 cycles/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 Annex C 1,000,000 cycles, AC-15, 3 A at 120 V, operating rate: <= 3600 cycles/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 Annex C 1,000,000 cycles, AC-15, 4 A at 24 V, operating rate: <= 3600 cycles/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 Annex C 1,000,000 cycles, DC-13, 0.2 A at 110 V, operating rate: <= 3600 cycles/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 Annex C 1,000,000 cycles, DC-13, 0.5 A at 24 V, operating rate: <= 3600 cycles/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 Annex C |
| Electrical Reliability | < 10exp(-6) at 5 V, 1 mA in clean environment conforming to EN/IEC 60947-5-4 < 10exp(-8) at 17 V, 5 mA in clean environment conforming to EN/IEC 60947-5-4 |
| Signal Type | Steady |
| Supply Voltage Limits | 19.2-30 V DC 21.6-26.4 V AC |
| Power Consumption | 18 mA |
| Operating Lifespan | 100,000 h at rated voltage and 25°C |
| Surge Voltage Resistance | 1 kV conforming to IEC 61000-4-5 |
| Device Explanations | Product, complete |
| Compatibility Code | XB5 |
Mounting
| Treatment | TH |
| Storage Ambient Temperature | -40...70 °C |
| Operating Ambient Temperature | -40-70 °C |
| Overvoltage Category | Class II conforming to IEC 60536 |
| Protection Rating (IP) | IP69, IP67, IP66 conforming to IEC 60529, IP69K |
| Protection Rating (NEMA) | NEMA 13, NEMA 4X |
| Protection Rating (IK) | IK05 conforming to IEC 50102 |
| Standards | EN/IEC 60947-5-4, EN/IEC 60947-1, UL 508, JIS C 4520, EN/IEC 60947-5-1, CSA C22.2 No 14 |
| Product Certifications | GL, UL listed, RINA, CSA, DNV, BV, LROS (Lloyd's register of shipping) |
| Vibration Resistance | 5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 |
| Shock Resistance | 30 gn (duration = 18 ms) for half-sine wave acceleration conforming to IEC 60068-2-27 50 gn (duration = 11 ms) for half-sine wave acceleration conforming to IEC 60068-2-27 |
| Resistance to Short Disturbances | 2 kV conforming to IEC 61000-4-4 |
| Resistance to Electromagnetic Fields | 10 V/m conforming to IEC 61000-4-3 |
| Resistance to Electrostatic Discharge | 6 kV on contact (on metal parts) conforming to IEC 61000-4-2 8 kV in free air (in insulating parts areas) conforming to IEC 61000-4-2 |
| Electromagnetic Emission | Class B conforming to IEC 55011 |
Contractual Warranty
Period: 18 months
Dimensions
Diagram shows side and front views of the pushbutton with dimensions indicated in mm and inches. It also details terminal connection sizes and mounting hole cutouts.
Terminal thickness: 1 to 6 mm / 0.04 to 0.24 in.
(1) Additional contact block or double contact.
Panel Cut-outs for Pushbuttons, Switches, and Indicator Lights (Finished Holes, Ready for Installation)
Connection via screw clamp terminals or printed circuit board.
(1) Diameter on finished panel or mounting support.
(2) For selector switches and emergency stop buttons, a ZB5AZ902 type anti-rotation plate is recommended.
(3) Ø 22.5 mm recommended (Ø 22.3+0.4) / Ø 0.89 in. recommended (Ø 0.88 in. +0.016)
| Connections | a in mm | a in in. | b in mm | b in in. |
|---|---|---|---|---|
| Via screw clamp or plug-in connector | 40 | 1.57 | 30 | 1.18 |
| Via Faston connector | 45 | 1.77 | 32 | 1.26 |
| On printed circuit board | 30 | 1.18 | 30 | 1.18 |
Details of Mounting Support Cut-out
(1) Diameter on finished panel or mounting support.
(2) For selector switches and emergency stop buttons, a ZB5AZ902 type anti-rotation plate is recommended.
(3) Ø 22.5 mm recommended (Ø 22.3+0.4) / Ø 0.89 in. recommended (Ø 0.88 in. +0.016)
Product Life Status: Lieferbar (Available)
