Bluetooth Transmitter AF-001
1. Introduction
Thanks for choosing our wireless audio adapter. This device is an airplane Bluetooth transmitter. When the movie begins on your next long flight, plug AF-001 into your seat's jack and listen to the film with your wireless headphones. AF-001 uses Bluetooth to connect your wireless earbuds or headphones to in-flight entertainment systems. No more lugging wired headphones or settling for those flimsy airline headphones. It can also transmit high-quality stereo sound from smart TVs, TV Boxes, DVD players, etc. to Bluetooth devices like Bluetooth headphones or Bluetooth speakers.
2. Specifications
- Bluetooth chipset: V4.2+EDR
- Bluetooth Frequency: 2402 MHz-2480 MHz
- Supported protocol: A2DP, AVRCP
- Bluetooth distance: 10M (Free space)
- Build-in battery: 200 mAh
- Charging input voltage: DC 5.0V
Device Description: A compact, square-shaped device with a circular button on top and a 3.5mm audio jack connector extending from one side. The connector has multiple rings indicating a standard audio plug. The device also features a Micro USB port and a power button.
3. Packing Content
- Bluetooth Transmitter x1 pc
- User manual x1 pc
- Charging cable x1 pc
- Airplane audio connector x1 pc
4. Appearance
- ① Micro USB charging interface
- ② ON/OFF button
5. Charging
When using for the first time, please fully charge the product. When the unit is in low power state, please charge it through the standard USB charging cable. The red light will be on when charging; the red light is off and blue light is on when fully charged.
6. Power ON/OFF
- ON: Long press the ON/OFF button for 3 seconds to turn on.
- OFF: Long press the ON/OFF button for 3 seconds to turn off.
- Automatic shutdown: The device will automatically turn off after 5 minutes in the absence of a connection state.
7. Operation Steps
7.1 Using in Airplane
- Press the ON/OFF button to turn on AF-001 and turn on your Bluetooth headphones.
- Enter the search pairing state: the red and blue lights flash alternately. It will connect with your Bluetooth headphones automatically.
- After successful pairing, the blue light flashes slowly.
- Plug AF-001 into your seat's audio jack on the airplane.
- You can listen to audio from your Bluetooth headphones.
7.2 Using as a Transmitter at Home
- Press the ON/OFF button to turn on AF-001 and turn on your Bluetooth headphones.
- Enter the search pairing state: the red and blue lights flash alternately. It will connect with your Bluetooth headphones automatically.
- After successful pairing, the blue light flashes slowly.
- Plug AF-001 into your home non-Bluetooth devices, such as a TV, TV Box, DVD player, etc.
- You can listen to home audio from your Bluetooth headphones.
8. Troubleshooting
If the unit cannot work normally, please see the information below:
- Confirm power is on and it's not in low power state.
- Please try to reboot the adapter and check if it can work normally.
- Please place the product as close as possible to the Bluetooth devices.
- Different Bluetooth devices use different chipsets and protocols; searching and connecting times may vary.
- Please contact support if you cannot solve problems according to the manual. Do not disassemble the unit or attempt repairs yourself.
F. Because Bluetooth chip schemes and transport protocols differ, there may be occasional connection issues. We will continue optimizing the device. Thanks for your support.
9. FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
10. IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- (1) This device may not cause interference.
- (2) This device must accept any interference, including interference that may cause undesired operation of the device.
French Translation: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
- (1) L'appareil ne doit pas produire de brouillage;
- (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
