Smart Card Power Switch User Manual

(Tuya Bluetooth Hotel Edition)

1. Overview

Thank you for purchasing our smart product. Please read this user manual carefully before use and strictly follow the instructions to ensure safe operation. Keep this manual for future reference.

2. Product Features

The product features a simple, elegant design.
The outer shell is constructed from 750°C high-temperature flame-retardant material.
Internal power components utilize a dual-process solder paste and red glue patching technique, ensuring multiple layers of quality assurance.
Integrated door magnetic linkage corridor light function: the light automatically turns on when the door opens, demonstrating thoughtful human-centered design.

3. Product Specifications

Product Name	Tuya Bluetooth Mesh Card Power Switch
Model	HW-INCA-BT2
Max Voltage	250V~
Input Frequency	50/60Hz
Max Power	8800W
Max Current	40A
Operating Voltage	220V~
Wireless Frequency	Bluetooth Mesh
Wireless Standard	Low Power Bluetooth 4.2/5.0
Operating Temperature	-20℃~45℃
Operating Humidity	10%~90% RH (Non-condensing)
Storage Temperature	-20℃~+45℃
Storage Humidity	30%~75% RH

Note: When operating under continuous high loads, the recommended maximum power is 5000W and the maximum current is 23A.

4. Wiring Diagram

Wiring Diagram Description:

The diagram shows a 220V AC power input with Live (L) and Neutral (N) terminals. It illustrates connections for a Corridor light, TV, and a general Light output. A "Smart power panel" with model BG-CKGP-BT1 is depicted, featuring Bluetooth Mesh Communication, 90-250V AC input, 8000W max total output, and 100W max corridor light output. A wired door magnet (commonly used for open/closed status) is also shown connected. The diagram includes terminal labels such as Live input, Neutral input, A1, A2, and "Output to electrical equipment".

Card Power Extraction Precautions:

When installing the card power switch, if its output is connected to an AC contactor, it is crucial to install an electronic arc suppressor on the contactor. Frequent switching of AC contactors can generate arcs, potentially damaging the switch components. The electronic arc suppressor effectively suppresses these arcs, ensuring the safe and stable operation of the switch.

5. Product Indicator Explanation

Blue Indicator Light: Indicates the device is in an unconfigured network state. The light automatically turns off once configured.
Red Indicator Light: Turns off when a card is detected and turns on when no card is detected.

A reset button is present on the device.

6. Network Configuration Preparation

When powered on for the first time, the device automatically enters pairing mode.
To reset the device, quickly press the reset button three times. The indicator light will start flashing.
Once the indicator turns off, it will flash again.
When the indicator flashes again, press the reset button three times to restart the pairing process.

7. Bluetooth Network Configuration

This section describes configuration using the Tuya Smart App:

Enable Bluetooth on your mobile device. Download and open the Tuya Smart App, then tap "Add Device".
Wait for the device to be detected and tap "Add".
Wait patiently for the device to be added.
After network configuration, the device is ready for use.

8. Hotel Engineering App Setup

This section describes configuration using the Hotel Engineering App:

Download and open the Hotel Engineering App, select your project, and start network pairing.
Wait for the device to be detected and tap "Add".
Wait for the network configuration process to complete.
Once completed, the card power switch is successfully paired.

Note: Supported card types include Mifare1, S50, S70, ISO14443A. NFC Frequency: 13.5MHz.

9. Non-Warranty Conditions

The product is not covered under warranty under the following conditions:

Unauthorized repairs, misuse, collision, neglect, abuse, liquid damage, or accidents occur.
The product has been modified, incorrect accessories were used, or warranty labels were removed or altered.
The product is beyond its warranty period.
Damage is caused by force majeure (acts of God).
The issue does not meet the conditions listed in the Product Performance Failure Table.

Product Performance Failure Table

Product	Performance Failure
Hanwei Card Power Switch	Device does not power on after connection Indicator light is non-functional Unable to connect to network Hardware failure causing function loss

Note: The product images, accessories, and user interface screenshots in this manual are for reference only. Since the product is continuously updated and upgraded, the actual product may differ slightly in appearance and details. Please refer to the actual product you receive.