SpeedyBee Nano 2.4GHz ExpressLRS Receiver
Product Overview
The SpeedyBee Nano 2.4GHz ExpressLRS Receiver is a compact and efficient receiver designed for radio control systems. It utilizes the ExpressLRS protocol for reliable communication.
Dimensions: 10.4mm (width) x 18.4mm (height)
Antenna Length: 82mm
Specifications
| Model | SB Nano 2G4RX |
|---|---|
| Name | SpeedyBee Nano 2.4GHz RX |
| Frequency | 2.4G |
| Antenna | T-antenna (56*82mm, 0.6g) |
| Chip | SX1281+ESP8285 |
| Power | 100mW (Measured around 120mW) |
| Input voltage | 5V |
| Antenna connector | IPEX1 |
| Weight | 0.7 gram (without antenna) |
| Dimension | 10.4mm*18.4mm |
| Default Firmware | SpeedyBee Nano 2.4GHz RX 3.4.3 |
Light Indicator
| Condition / Blinking | Description |
|---|---|
| Double red blinking | Powering up but unlinked, no packages received from the transmitter. |
| Slow red blinking | Receiver is connected, with signal received. |
| Solid red | Wi-Fi is turned on, and updating via Wi-Fi is available. |
| Fast red flashing | Wi-Fi is turned on and updating from Wi-Fi. |
Important Notes (PS)
To turn on Wi-Fi, wait for 60 seconds after powering on or long press the button for 3 seconds.
Quickly cut off the power 3 times to enter binding mode.
