Owner's Manual for TCL models including: P609FLW, P608FLW, Front Load Washer
File Info : application/pdf, 24 Pages, 14.43MB
DocumentDocumentThe Creative Life
Before using your washing machine,please
read this manual carefully and keep it for future reference.
This manual is also available online. The drawings in this manual are for instructional
purpose only,they may vary from the model you have purchased
Model: P608FLW / P609FLW
Washing Machine Installation Washing Machine Operation
P608FLW
P609FLW
Safety Precaution
AWARNING
To reduce the risk of fire.electric shock,or injury to persons when using your appliance,follow basic precautions,including the following
· If the power cord is damaged.it must be replaced by the manufacturer, service agent or similarly qualified persons in order to avoid the hazard. · The new hose-sets supplied with the washer are to be used and that old hose-sets should not be reused. · This appliance is not intended for use by persons{including children)with reduced physical.sensory or mental capabilities.or lack of experience and knowledge.unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.Children should be supervised to ensure that they do not play with the appliance.
· This appliance can be used by children aged from 8 years and above and persons with reduced physical.sensory or mental capabilities or lack of experience and knowledg e if they have been g iven supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.Children shall not play with the appliance.Cleaning and user maintenance shall not be made by children without supervision.
· The washing machine must not be placed on carpet as it may block the ventilation opening on the base. · Children of less than 3 years should be keep away unless continuously supervised.
· This appliance is intended to be used in household and similar applications such as: -staff kitchen areas in shops.offices and other working environments; -farm houses -by clients in hotels.motels and other residential type environments; -bed and breakfast type environments; -areas for communal use in blocks of flats or launderettes. · Take care that power voltage and frequency shall be identical to those of washing machine. · To ensure your safety.power cord plug must be inserted into an earthed socket. Check carefully and make sure that your socket is proper and earthed reliably. · Do not use any socket with rated current less than that of washing machine. · Do not operate your washer when parts are missed or broken. · Never pull out power plug with wet hands.
Safety Precaution
· Replace immediately worn power cord,loose plugs/power sockets. · Unplug your washer before cleaning or making any repair. · Please check whether the water inside the drum has been drained before
opening the door.Please do not open the door if there is any water visible. · Glass door may be very hot duing the operation.Keep kids and pets far
away from the washer during the operation. · Make sure that the water and electrical device are connected by a
qualified technician in accordance with the manufacturer's instruction and local safety regulations. · Before operating this machine,all packages and transit bolts must be removed.Otherwise,the washing machine may be seriously damaged while washing the clothes. · Flammable and explosive or toxic sovents are forbidden.Gasoline and alcohol etc.Shall not be used as detergents.Please only select the detergents suitable for machine washing. · Be careful of scalding while the washer is drainning hot washing water. · Never unplug your washer by pulling on the supply cord.Always grasp the plug firmly and pull straight out from the outlet. · If your old appliance is not being used anymore,we recommend that you remove the door and cut off the supply cord. · Packing materials may be dangerous to the kids.Please keep all packing materials(plastic bags,foams etc)far away from the kids. · Do not climb up and sit on top cover of the machine. · Pets and kids may climb into the machine.Check the machine before every operation. · Do not lean against the door of the washer.
-----------------e-----------------1
It is recommended bras with steel wire are placed in a laundry bag
Washing Machine Installation
fAIMi We recommend that your new washer is installed by a qualified appliance technician. If you feel that you have the skills to install the washer, please read the installation instructions carefully before installing.
Tools needed
You may need to have the following tools to help you in the installation of your washer:
· Scissors · Gloves · Standard Screwdriver
· Pliers · Spanner
Unpacking the washing machine Unpacking your washing machine and check if is there any damage during the transportation.Also make sure that all the the items(as shown below) in the attached bag are received. If there is any damage to the washing machine during the transportation.or any item is missing or damaged, please contact your place of purchase immediately.
If your washing machine is not double inlet, you will not have the hot inlet hose.
Inlet Hose (Connect to cold
water supply)
0
Hot Inlet Hose*
(Connect to Hot water supply)
Hole Cover (4EA)
(Used to plug transit bolt holes)
0
Drain Hose Support Bracket
(Used to loop the end
nof drain hose)
Spanner
(1.Used to adjust the bottom of the machine, 2.Remove the transport boll on the back of the machine)
*If your washing machine is not double inlet, the machine does not have the hot inlet hose.
Select the location
Before installing the washer, a location characterized as follows
shall be selected:
-Rigid,dry,and level surface(if not level,please make it level with
reference to the following figure'Adjustable Leg').
-Avoid direct sunlight.
-Sufficient ventilation. -The ambient temperature
shall
be
between
0-40°C.
-The ambient humidity shall be below 95%(When the temperature is 25°C).
-Keep far away from heat sources such as coal or gas. Make sure that
the washer will not stand on the power cord. Do not install the washer
on carpet floors.
-----------------·-----------------
Washing Machine Installation
Remove transit bolts Before using this washing machine,transit bolts must be removed from the backside of this machine.Please take the following steps to remove
.... ... ... ... /1.thebolts: Keep the transit bolts properly for futher use.
1.Loosen the four transit bolts with a spanner
2.Take each bolt head and pull it through the wide part of the hole.Repeat for each bolt.
3.Fill the holes with the supplied plastic covers.
Level the washing machine
Install or place the washing machine under the environmental temperature of no less than 0°C. Do not install outdoors, for it may damage the programming controller.
:t: Base foot struct erre Lock nut :
Factory status
Lockingnut close to bottom of box
Support foot covered
Supporting foot close
with rubber
lo locking nut
&,,. Note:in order to facilitate installation,the factory stutus of the foot may not be all
locked,please be sure to lock all four feet before adjusting the level!
1.When placing the machine.check whether the bottom foot is in the factory state.if not,please restore the bottom foot to the factory state:the locking nut is locked tightly on bottom of the box,and the support foot is locked tightly on the locking nut:
2.After the machine is placed,press the opposite
\
corner of the top cover plate of the washing machine with both hands in turn
· and shake it vertically downward
to check whether the supporting foot is close to the ground and
- - - -', _ - -
whether the machine is moving
3.To ensure that the machine is placed in the right state, loosen the locking nut according to thedirection shown in the diagram with the attached spanner to the appropriate height until the supporting foot is close to the ground and the machine is free from movement.
Support base is close
........
·
to the
round
4.Finally,use the spanner to turn the lock nut back to the bottom of the box to lock it(you can also
-If slightly fix the support foot by hand to avoid the support foot moving again)
Ensure that the supporting feet do not move again
__
&,. CAUTION
1.The machine must be perfectly leveled and stabilized when the four supporting feet are close to the ground. Lower the feet as much as possible on the basis that the machine is leveled.
2.lmproper leveling adjustment may cause loud noise, machine vibrating, machine displacement and other abnormal phenomena.
3. The Air-vent is designed on the bottom of the machine (prevent blockage). Install the washing machine on solid, smooth and skid-proof ground. Do not place the washing machine on a soft blanket or wooden floor, or various desktops and stands, to prevent unnecessary injury.
-----------------0-----------------
Washing Machine Installation
Washing Machine Installation
Connect the power As the maximum current through the unit is 1 0A when
you are using its heating function, please make sure the power supply system (current, power voltage and wiring) in your home can meet the normal loading requirements of the electrical appliance. Please connect the power to a socket which is correctly installed and properly earthed. Make sure the power voltage at your power outlet is same to that in the machine's rated voltage. Power plug must match the socket. Do not use a multi-purpose plug or socket as extension cord. Do not connect and pull out plug with wet hands. When pulling out the plug, hold the plug tightly and then pull it out. Do not pull the power cord forcibly. Any electrical components (plug, power cord etc.) must be replaced by a certified agent or qualified service personnel.
A WARNING
1.This machine must be earthed properly. If there is any short circuit, earthing can reduce the danger of electrical shock.
2. The washing machine shall be operated in a circuit separate from other electrical appliances. Otherwise, power protector may be tripped or fuse may be burned out.
Washing Machine Operation
Ensure your machine is installed properly before use.
Before washing clothes for the first time, you must run a complete cycle without clothes. To do this: 1.Connect power source and water. 2.Put a little detergent(about 10g) into the drawer and close it. 3.Press the On/Off button. 4.Turn the knob to the "Cotton" . 5.Press the Start/Pause button.
This will remove any water from the manufacturer's test run remaining in the machine.
----------------·----------------
This cycle has an increased rinse time to ensure laundry detergent is well removed to reduce skin allergy.
This cycle is specially set in this machine to clean the drum and tube. It applys 60/90°C high temperature sterilization to make the drum and tube more clean. When a proper amount bleach is used, the barrel cleaning effect will be better.When you run this program, we suggest not to put in any clothes, you can use this procedure regularly according to he need.
Washing Machine Operation
fAiMi The "standard cotton 60°C/40°C with max speed" programme are the standard washing programs, and they are suitable to clean normally soiled cotton laundry and that they are the most efficient programmes in terms of combined energy and water consumptions for washing that type of cotton laundry, that the actual water temperature may differ from the declared cycle temperature.
Maintenance
Proper maintenance on the washing machine can extend its work life.
&_ WARNING
Before your maintenance starts, please pull out the power plug or disconnect power and close the tap. Clean internal drum The rust left inside the drum by the metal articles shall be removed immediately with chlorine-free detergents. Never use steel wool. Clean surface
1.lf there is any water overf low, use a dry cloth to wipe it off immediately. No sharp items are allowed to strike the washer.
2.The surface can be cleaned with a diluted non-abrasive neutral detergent when necessary.
Clean the drain pump
Open the filter cover with tools such as coins according to the direction of the graphic;
Unscrew the filter and pay
attention to the remaining water taking out any foreign material
,
-
from the drain pump filter;
- Reinstall the filter.
3.
-----------------e-----------------1
Troubleshooting
TROUBLES
SOLUTIONS
There is some remaining water in the machine
The washer does not run
Water leakage
Abnormal noise and severe vibration
Washing efficiency is not satisfactory
The machines buttons will not respond to presses
1111.
This is normal and is the result of water tests performed at the factory
1111.
Check if the power plug is inserted well. Check if the tap is opened. Check if the button "Power'' is pressed. Check if the button "Start/Pause" is pressed. Check if the delay feature is activated.
Check and fasten inlet hose. 1111. Clean up drain hose and ask a specialized person
to repair it when necessary.
1111.
Check if the transit bolts has been removed. Check if the adjustable legs are adjusted level. Check if the washer is installed on the solid and level floor. Check if there are any barrettes or metal articles inside.
Select a proper procedure. 1111. Add the proper detergent quantity according
to the instructions in detergent package.
Check if the "Child-lock" feature has been activated. 1111. Press the "Start/Pause" button first then
press other buttons.
Actual running time of the cycle does not corresponded to the display time
1111.
Check if clothes in the drum is dispersed well. Check if the water is drained out, and water is
inflowing well.
The washer fills while draining
Check if the max height of the drain hose is lower 1111. than 65cm
Check if the drain hose is immersed.
----------------c----------------
Troubleshooting
DISPLAY
MEANS
SOLUTIONS
i L
1111.
The washer fill time is too slow
.- .-11
1111.
Water drainage is too slow
1 L1 J 1111. Door lock issue
·- ·-·L · 1111. Water is overflowed
1 .- 1 -. 1 .- 1 .-. 1 .- 1.
1111.
The electrical motor issue
1111. Heater issue
1111.
Temperature Sensor fault
1 .- n 7 1111. communication failure
1111. 1111.
Check if the tap is opened. Check if the water pressure is too low. Check if the inlet hose is blocked.
Check if the drain pump is blocked. Contact a technician if necessary.
Close the door well again.
Check if the clothes is caught 1111. between the door and seal.
Contact a technician if
necessary.
1111.
Let the machine drain out water automatically until the water level is suitable
for wash procedure. Contact a technician if necessary.
1111. Please contact a technician.
1111. Please contact a technician.
1111. Please contact a technician.
1111. Please contact a technician.
i L··n U 1111. Inverter failure
1111. Please contact a technician.
1 .._n .-
1111.
The procedure running is not corresponded to the cycle that the knob points.
Turn the cycle selector to the 1111. cycle corresponded to the
procedure working on.
.&.NOTE
Please refer to the actual purchased model for fault displays. Different models have
----diff-ere-ntfa-ult-dis-play-s -------·-----------------
Appendix
Fabric Care Label
D D
Resistant material Delicate fabric
Can be ironed at 1 00'C max Do not iron
0'31
"liilliil '87'31
Item may be washed at 90'C Item may be washed at 60'C Item may be washed at 40'C
'.§1 t;§J
tJ
Item may be washed at 30'C Item may be hand washed
@ Can be dry cleaned using any solvent
® Dry clean with perchloride,lighter fuel, pure alcohol or R113 only
® Dry clean with aviation fuel, pure alcohol or R113 only
0 Do not dry clean
E] Dry flat
'f2J Dry clean only
[ill] Can be hung to dry
LJ Can be bleached in cold water
Dry on clothes hanger
A Do not bleach
B Tumble dry, normal heat
0 Can be ironed at 200'C max
Tumble dry, reduced heat
181 Can be ironed at 150'C max
Do not tumble dry
Elecrical Warning
To avoid fire, electrical shock and other accidents, please remember the following reminding:
-Only the voltage indicated in power label can be used. If you are not clear of the voltage at home, please contact the local power bureau. -When you are using the heating function, the maximum current through the washing machine will reach 10A. Therefore,please make sure the power supply units(current,voltage and cable) can meet the normal load requirements for the machine. -Protect the power cord properly. Power cord shall be fixed well so that it will not be a trip hazzard and risk other items being damaged. Special attention shall bepaid to the plug location. -Do not make the wall-mounted socket overloaded or cable extended. Over loading of the wiring may cause fire or electrical shock. Do not pull out power plug with wet hands. -To ensure your safety, the power plug shall be inserted into an earthed socket. Carefully check and ensure that your socket is properly and reliably earthed.
-----------------0-----------------
Appendix
Protecting the environment · The washer is manufactured by recyclable materials. If you decide to dispose of this washer.please observe the local waste disposal regulations.Cut off the power cord so that the washer cannot be connected to power. Remove the door so that small animals and children cannot get trapped inside the washer. · Do not exceed the detergent quantities recommended in the detergent manufactures' instruction. · Use stain removal products and bleaches before the wash cycle only when strictly necessary. · Save water and electricity by only washing full loads(the exact amount depends upon the program used).
Standard programme for the Energy and Water Labelling according to AS/NZS2040.I: 2005: P608FLW * ECO Cotton,40°C ,1400rpm, is the default setting and the recommended wash programme for normally soiled 7.5kg cotton load. ** The detergent dosage: rated capacity* 12.5g*80% and anti-foam aid is 15g. *** Detergent dissolvent method: Dissolve the detergent first and pour the dissolved detergent into the machine when the main wash starts. P609FLW * ECO Cotton,40°C ,1200rpm, is the default setting and the recommended wash programme for normally soiled 8.5kg cotton load. ** The detergent dosage: rated capacity* 12.5g*80% and anti-foam aid is 17g. *** Detergent dissolvent method: Dissolve the detergent first and pour the dissolved detergent into the machine when the main wash starts.
----------------e----------------
The Creative Life
Corel PDF Engine Version 20.1.0.708