Product Overview
The Electrolux EFR31223 is an advanced robotic vacuum cleaner designed to provide efficient and autonomous cleaning for various home environments. This device is equipped with smart navigation capabilities to effectively clean floors while avoiding common household obstacles.
The robotic vacuum cleaner is designed to navigate various home environments, avoiding obstacles such as stairs, loose wires, wet surfaces, and furniture. It is not suitable for use on thick carpets.
What's in the Box
- Electrolux Robotic Vacuum Unit
- Charging Dock
- Power Adapter
- Remote Control (for selected models only)
- Side Brushes (2 pairs included)
- Main Brush
- Filter Kit 2 (Wet) - Ref: EFR3W, PNC: 900923495
- Side Brushes - Ref: ERSB4, PNC: 900923496
- Main Brush - Ref: ERMB2, PNC: 900923497
- Mopping Pads - Ref: EMRI, PNC: 900923499
The device supports 2.4 GHz Wi-Fi and Bluetooth connectivity. The companion application can be downloaded from Google Play or the App Store.
Operation and Maintenance
Charging
The robotic vacuum automatically returns to its charging dock when the battery is low. Ensure the charging dock has a minimum clearance of 0.5 meters on either side and 1.5 meters in front for optimal operation. The battery status is indicated by lights on the unit.
Power On/Off
To power on or off the device, press and hold the main power button for approximately 5 seconds.
Dustbin Emptying and Filter Cleaning
Regularly empty the dustbin by opening the top cover of the robot and removing the dustbin module. The filter can be detached from the dustbin for cleaning. It is recommended to clean the filter regularly to maintain suction performance.
Brush Maintenance
The main brush and side brushes should be cleaned periodically to remove tangled hair and debris. The main brush can be removed by opening its cover on the underside of the robot. Side brushes can be unscrewed for cleaning or replacement.
Mopping Function
To use the mopping function, fill the water tank and attach the mopping pads. After use, remove and clean the mopping pads. Allow mopping pads to dry thoroughly, ideally for over 24 hours at temperatures up to 40°C, to prevent odor and mildew.
Software and Compliance
The software embedded in the robotic vacuum cleaner is partly based on free and open-source software. For access to the source code, full copyright information, and applicable license terms, please visit: www.electrolux.com/rvc-supplementary.
For information regarding control according to international standards, please visit: www.electrolux.com/rvc-supplementary.
Charger Compatibility
Use only the specified chargers for the Electrolux EFR31223 robotic vacuum cleaner. Refer to the table below for regional compatibility:
| Region | Charger Model | Power Supply Model |
|---|---|---|
| Korea | DS-ER71 | DBS012A-2000600K or BLJ15L200060P-K |
| Singapore | DS-ER71 | DBS012A-2000600G or BLJ15L200060P-V |
| India | DS-ER71 | BLJ15L200060P-IN |
| Australia & New Zealand | DS-ER71 | DBS012A-2000600A or BLJ15L200060P-S |
| Thailand & Vietnam | DS-ER71 | DBS012A-2000600K or BLJ15L200060P-K |
| South Africa | DS-ER71 | DBS012A-2000600G or BLJ15L200060P-V |
The robotic vacuum cleaner uses a Lithium battery.
