Instruction Manual for FULL SWING models including: SimSpace GSPro Connection, SimSpace, GSPro Connection
KIT & GSPro Wi-Fi Connection – Full Swing
KIT & GSPro Wi-Fi Connection This document is designed to help with connecting your KIT and the GSPro Connection Application via Wi-Fi after installation. Please follow the steps below. 1. Power on the Laptop. Make sure it is connected to the local Wi-Fi network. 2. Power on the KIT. Pair the KIT to the same local Wi-Fi network as the laptop. 3. Once paired, the KIT will display a Wi-Fi signal in the top right of the OLED screen. 4. On the laptop, open the GSPro Launcher application. 5. The GSPro Configuration screen will then be displayed. Select the following: · Screen resolution should default to your screen's current resolution. · Graphics quality determined by your graphics card. · Select monitor when running on a multi-monitor setup, this will present GSPro on the selected (right or left) monitor. 6. Click Play! to begin. 7. Next, the Connect Application will launch. Select Full Swing. 8. In the Connect Application, click on the Connection Manager tab across the top. 9. To locate your KIT, click the Search button. Click Search multiple times until the KIT ID appears. Then click Connect and check Auto Connect on Startup box. 10. Watch the KIT at this time as it will light up Green 1x and the display screen will change to the Full Swing KIT Game Mode. Once connected there will be a Green Checkmark in the top right corner next to the Wi-Fi symbol. 11. DO NOT CLOSE the Connection Application. Just Minimize the screen so you can begin playing. NOTE: If you close the Connection Application, you will drop your Wi-Fi connection to the KIT. The Connection Application must stay open during the duration of the game play! 12. Place the KIT 8 -10" from the hitting mat. 13. Begin Playing! NOTE: Wi-Fi to the laptop is crucial for these two technologies to connect; ensure you have good signal when operating the Full Swing KIT Studio.Microsoft Word for Microsoft 365